Manual d'instruccions del suport de carregador sense fil dual SwanScout 504

1. Producte acabatview

The SwanScout 504 Dual Wireless Charger Stand is designed to efficiently charge two devices simultaneously. It features a foldable design for portability and includes a dimmable LED clock display. This device is compatible with a wide range of wireless charging-enabled smartphones and earbuds.

Image 1.1: The SwanScout 504 Dual Wireless Charger Stand in upright mode, charging two smartphones.

For a visual introduction to the product, please watch the video below:

2. Què hi ha a la caixa

Verifiqueu que tots els elements siguin presents al paquet:

• SwanScout 504 Dual Wireless Charging Station
• USB C to USB C Charging Cable (1x)
• 30W Charging Brick (1x)
• Manual d'usuari
• Targeta de garantia

Image 2.1: All components included with the SwanScout 504 Dual Wireless Charger Stand.

3. Instruccions de configuració

1. Connectar l'alimentació: Insert the USB-C end of the provided charging cable into the port on the SwanScout 504 charging station. Connect the other end of the cable to the included 30W charging brick, then plug the brick into a wall outlet.
2. Col·loca el suport: The charger can be used in two modes:
   • Mode de suport vertical: Fold out the kickstand from the back of the unit to position it vertically. This mode is ideal for charging two phones simultaneously while viewing contingut.
   • Mode de coixinet pla: Fold the kickstand back into the unit for a flat charging pad. This mode is suitable for charging phones horizontally or for charging wireless earbuds.
   

   Image 3.1: The SwanScout 504 in both flat and upright configurations.
3. Estableix el rellotge:
   • Introduïu la configuració de l'hora: Long press the 'Set' button (usually indicated by a clock icon or 'O') for 3 seconds to enter hour setting mode.
   • Adjust Hour/Minute: Use the '+' and '-' buttons to adjust the hour. Short press the 'Set' button to switch to minute setting, then use '+' and '-' to adjust minutes.
   • Sortir de la configuració: Long press the 'Set' button for 3 seconds to exit the time setting mode.
   • Switch 12/24H Format: Short press the 'Set' button once (outside of setting mode) to toggle between 12-hour and 24-hour time formats.
   

   Image 3.2: Controls for setting the clock and adjusting its display.

4. Instruccions de funcionament

1. Càrrega de telèfons intel·ligents:
   • Place your wireless charging-compatible smartphone on one of the designated charging areas. Ensure the phone is centered over the charging coil for optimal performance.
   • The raised charging area design assists with precise alignment.
   • The LED display on the charger will indicate charging status.
   • The charger supports up to 10W fast charging for each phone, allowing two phones to charge simultaneously.
   

   Image 4.1: Two phones charging simultaneously on the SwanScout 504.

2. Càrrega d'auriculars sense fil:
   • For wireless earbuds (e.g., AirPods, Galaxy Buds), use the flat pad mode. Place the earbud case on one of the charging areas, ensuring it is correctly positioned over the induction coil.
   

   Image 4.2: Charging a smartphone and earbuds in flat mode.

3. Dimmable Clock Display:
   • Tap the light icon button on the surface of the charger to cycle through four levels of clock brightness (100%, 50%, 20%, Off).
   • This allows adjustment for different environments, such as a bedroom at night.
   

   Image 4.3: Adjusting the clock display brightness.

5. Compatibilitat

The SwanScout 504 is compatible with most Qi-enabled devices. Refer to the tables below for specific device compatibility.

5.1. Compatible Phone Models (10W Output)

Image 5.1: List of compatible phone models for wireless charging.

Nota: This list is not exhaustive. Any phone supporting Qi wireless charging is generally compatible.

5.2. Compatible Wireless Earbuds (3.5W Output)

Image 5.2: List of compatible wireless earbud models.

Nota: This list is not exhaustive. Any earbuds with a wireless charging case supporting Qi wireless charging are generally compatible.

5.3. Phone Case Compatibility

The charger is designed to work with phone cases up to 0.2 inches (5mm) thick. However, certain types of cases and attachments may interfere with wireless charging:

• Coixinets magnètics
• Metal cases
• Targetes de crèdit
• Metal rings or pop sockets

Remove these items before placing your device on the charger to ensure proper function.

Image 5.3: Visual guide for phone case compatibility.

6. Informació important de seguretat

• Use only the provided 30W charging brick and USB-C cable. Using an inadequate power source may result in slow charging or malfunction.
• Do not place foreign objects (e.g., metal, magnets, credit cards) on the charging surface, as this may interfere with charging or cause damage.
• Eviteu exposar el dispositiu a temperatures extremes, llum solar directa o humitat.
• No desmunteu, modifiqueu ni intenteu reparar el dispositiu vosaltres mateixos. Poseu-vos en contacte amb el servei d'atenció al client per obtenir ajuda.
• Mantingueu el dispositiu fora de l'abast dels nens i les mascotes.
• Assegureu-vos d'una ventilació adequada al voltant del carregador durant l'ús.

7. Solució De Problemes

• El dispositiu no es carrega:
  • Ensure the charging station is properly connected to the included 30W power adapter and a working wall outlet.
  • Verify your device is placed correctly on the charging coil. Adjust its position if necessary.
  • Remove any thick or metallic phone cases, magnetic pads, or credit cards from your device.
  • Confirm your device supports Qi wireless charging.
• Càrrega lenta:
  • Ensure you are using the provided 30W power adapter. Lower wattagEls adaptadors electrònics poden provocar velocitats de càrrega més lentes.
  • Check for proper device alignment on the charging coil.
  • Avoid charging in excessively hot environments, as this can reduce charging efficiency.
• Clock display is off or incorrect:
  • If the clock display is off, tap the light icon button to adjust brightness.
  • If the time is incorrect, follow the "Set the Clock" instructions in Section 3.
  • The clock has a backup battery that retains time for up to 15 days without external power. If the device has been unplugged for longer, the time may need to be reset.

8. Especificacions

9. Garantia i Suport

The SwanScout 504 Dual Wireless Charger Stand comes with a warranty. Please refer to the included Warranty Card for details regarding coverage and duration.

For technical support, troubleshooting assistance, or warranty claims, please contact SwanScout customer service through their official channels or the retailer where the product was purchased.