Manual d'usuari de la placa de desenvolupament GPS LoRa de LILYGO T-BeamSUPREME ESP32-S3 UBLOX M10S

1. Introducció

The LILYGO T-BeamSUPREME is a versatile development board designed for long-range communication and GPS tracking. It integrates an ESP32-S3FN8 dual-core LX7 microprocessor, a LoRa SX1262 module for 915MHz communication, and a UBLOX M10S GPS module for precise positioning. The board also features a 1.3-inch SH1106 OLED display for information output. This manual provides essential instructions for setting up, operating, and maintaining your LILYGO T-BeamSUPREME development board.

Característiques principals:

MCU: ESP32-S3FN8 Dual-core LX7 microprocessor
LoRa Module: SX1262 (915MHz)
Mòdul GPS: UBLOX M10S
Visualització: 1.3-inch SH1106 OLED
Pre-burning LILYGO factory firmware

2. Configuració

Before using your LILYGO T-BeamSUPREME, ensure all necessary components are properly connected and the firmware is loaded.

2.1 Muntatge físic

Carefully connect the antenna to the LoRa module's SMA connector. Ensure a secure connection to optimize signal transmission and reception.

**Figura 1:** Primer pla view of the LILYGO T-BeamSUPREME showing the antenna connection point. Ensure the antenna is securely fastened to the SMA connector.

2.2 Firmware Installation

The LILYGO T-BeamSUPREME comes with LILYGO factory firmware pre-burned. If you need to update or change the firmware, follow the instructions provided by LILYGO or the Meshtastic project.

For detailed instructions on flashing Meshtastic firmware, refer to the official Meshtastic documentation or the following video:

Vídeo 1: How to Install Meshtastic to LILYGO T-Echo. This video demonstrates the firmware installation process, which is similar for the T-BeamSUPREME.

2.3 Case Assembly (Optional)

If you are using a protective case, follow the manufacturer's instructions for assembly. Ensure all components fit correctly and connections are not strained.

Vídeo 2: N30 Protective Case for ESP32 LoRa V3 Board Antenna Battery. This video shows the assembly of a protective case, which can provide guidance for similar cases for the T-BeamSUPREME.

3. Instruccions de funcionament

The LILYGO T-BeamSUPREME is designed for various applications, including mesh networking and GPS tracking. This section covers basic operation.

3.1 Engegada/apagada

Connect a compatible battery or USB-C power source to the board. The OLED display should light up, indicating the device is powered on. To power off, disconnect the power source.

3.2 Meshtastic Application Usage

For mesh communication, install the Meshtastic application on your smartphone (Android/iOS). Connect your T-BeamSUPREME via Bluetooth to the app to send/receive messages, view device status, and manage channels.

Vídeo 3: How to Install Meshtastic to LILYGO T-Echo. This video also demonstrates basic Meshtastic app usage for sending messages and viewing devices, applicable to the T-BeamSUPREME.

3.3 Funcionalitat del GPS

The integrated UBLOX M10S GPS module provides location data. This data can be viewed on the OLED display or through the Meshtastic app, depending on the firmware configuration.

4. Manteniment

To ensure the longevity and optimal performance of your LILYGO T-BeamSUPREME, follow these maintenance guidelines:

Mantingueu el dispositiu sec i allunyat de la humitat.
Eviteu exposar el dispositiu a temperatures extremes.
Handle the board with care to prevent physical damage.
Regularly check for firmware updates to benefit from new features and bug fixes.

5. Solució De Problemes

If you encounter issues with your LILYGO T-BeamSUPREME, consider the following troubleshooting steps:

El dispositiu no s'encén: Check battery connection and charge level. Ensure the USB-C cable is functional if powering via USB.
No LoRa communication: Verify antenna connection. Ensure both devices are on the same frequency band and have compatible firmware.
El GPS no rep senyal: Assegureu-vos que el dispositiu té una imatge clara view of the sky. Allow sufficient time for initial satellite acquisition.
Problemes de connectivitat Bluetooth: Restart both the T-BeamSUPREME and your smartphone. Ensure the Meshtastic app has necessary permissions.
Firmware issues: Re-flash the firmware following the official instructions.

6. Especificacions

Detailed technical specifications for the LILYGO T-BeamSUPREME (RM-T-BeamSUPREME):

Característica	Detall
Marca	LILYGO
Sèrie	T-BeamSUPREME
Número de model de l'article	RM-T-BeamSUPREME
MCU	ESP32-S3FN8 Dual-core LX7 microprocessor
Mòdul LoRa	SX1262 (915MHz)
Mòdul GPS	UBLOX M10S
Mostra	1.3-inch SH1106 OLED
RAM	LPDDR4
Tipus sense fil	Radio Frequency (LoRa), Wi-Fi
Sistema operatiu	Linux (compatible)
Marca del processador	Espresso
Nombre de processadors	2

7. Garantia i Suport

For any questions, suggestions, or technical support regarding your LILYGO T-BeamSUPREME, please feel free to contact LILYGO directly. You can also visit the official LILYGO Store on Amazon for more information and products.

LILYGO Store: Visit the LILYGO Store

GitHub Repository: For source code and further development information, visit github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series.

	Guia de l'usuari de LILYGO T-BEAM-S3: Configuració i desenvolupament Aquesta guia d'usuari proporciona instruccions completes per configurar la placa de desenvolupament LILYGO T-BEAM-S3. Apreneu a configurar l'entorn de programari amb l'IDE d'Arduino, connectar la placa i utilitzar les seves capacitats Wi-Fi, BLE, GPS i LoRa per a projectes d'IoT.
	Guia de l'usuari de LILYGO T-WATCH S3: Configuració i desenvolupament amb Arduino Apreneu a desenvolupar aplicacions IoT amb el LILYGO T-WATCH S3. Aquesta guia tracta la configuració de l'IDE d'Arduino, la programació de l'ESP32-S3 i l'ús d'ordres SSC, proporcionades per Xinyuan.
	Guia d'usuari de LILYGO T-Deck ESP32-S3 per al desenvolupament d'Arduino Guia d'usuari completa per a la placa de desenvolupament LILYGO T-Deck, que detalla la configuració de l'IDE d'Arduino, la configuració d'ESP32-S3, la funcionalitat Wi-Fi i LoRa i la referència d'ordres SSC per a aplicacions IoT.
	Guia de l'usuari de LILYGO T-Display-S3 Una guia d'usuari per a la placa de desenvolupament LILYGO T-Display-S3, que cobreix la configuració, l'ús de l'IDE d'Arduino i les ordres bàsiques de Wi-Fi.
	Guia de l'usuari de LILYGO T3-S3 Guia d'usuari per a la placa de desenvolupament LILYGO T3-S3, que cobreix la configuració de l'IDE d'Arduino, la configuració, les proves i la referència d'ordres Wi-Fi per al mòdul ESP32-S3.
	Guia de l'usuari de la placa de desenvolupament LILYGO T-Display-S3 Pro ESP32-S3 Comprehensive user guide for the LILYGO T-Display-S3 Pro ESP32-S3 development board. Covers setup of the Arduino IDE, software installation, configuration, connecting the board, and a reference for common Wi-Fi SSC commands.

LILYGO RM-T-BeamSUPREME