ELEGRP Decorator Triple Rocker Switch Model 72611-BL Instruction Manual

1. Introducció

Thank you for choosing the ELEGRP Decorator Triple Rocker Switch. This manual provides essential information for the safe installation, operation, and maintenance of your new switch. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Informació important de seguretat

• ADVERTÈNCIA: RISC DE DESCARGA ELÈCTRICA. Always turn off power at the circuit breaker or fuse box before installation, servicing, or removing the switch.
• Install in accordance with all national and local electrical codes. If you are unsure about any part of these instructions, consult a qualified electrician.
• Utilitzeu-lo només amb cable de coure o revestit de coure.
• No l’utilitzeu en llocs humits.
• Assegureu-vos que totes les connexions dels cables estiguin segures.

2. Característiques del producte

The ELEGRP Decorator Triple Rocker Switch is designed for reliable performance and ease of use, offering control for three separate lighting loads from a single gang box.

• Rational Design: Features three smooth ON and OFF paddles with tactile feedback to prevent accidental operation.
• Construcció d'alta qualitat: Made from impact-resistant polycarbonate thermoplastic and solid steel for extended durability.
• Auto-terra: Includes a self-grounding clip for automatic connection in properly grounded metal wall boxes.
• Fàcil instal·lació: Supports both back wiring and side wiring. Features break-off plaster ears for flush alignment and a shallow body design to fit standard junction boxes.
• UL & CUL Listed: Strictly tested to UL Standards for safety and quality assurance.

Figure 1: Key features of the ELEGRP Triple Rocker Switch, highlighting its durable construction and safety certifications.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de la instal·lació:

• 1 x ELEGRP Decorator Triple Rocker Switch (Model 72611-BL)
• 1 x Matching Wall Plate (Screw Wall Plate, Glossy Black)
• Cargols de muntatge

4. Configuració i instal·lació

Follow these steps carefully to install your ELEGRP Triple Rocker Switch.

Passos previs a la instal·lació

1. Apagueu l'alimentació: Locate the circuit breaker or fuse that controls the switch location and turn off the power. Verify power is off using a voltage provador.
2. Treure l'interruptor antic: Carefully remove the existing wall plate and switch from the wall box. Disconnect the wires from the old switch.
3. Inspeccioneu el cablejat: Identify the hot (line), neutral, ground, and load wires. If you are unsure, consult a qualified electrician.

Instruccions de cablejat

The ELEGRP Triple Rocker Switch offers two wiring options: side wiring and back wiring.

Figure 2: Wiring options for the switch, illustrating connections for hot, neutral, and ground wires.

1. Cable de terra: Connect the green or bare copper ground wire from the wall box to the green grounding screw on the switch.
2. Hot (Line) Wire: Connect the incoming hot (line) wire to the black screw terminal. This switch uses a common feed for all three loads.
3. Cables de càrrega: Connect the three load wires (one for each light/fixture) to the three brass screw terminals.
4. Fil neutre: The neutral wire typically bypasses the switch and connects directly to the loads. Ensure proper neutral connections for your fixtures.

Muntatge de l'interruptor

1. Carefully fold the wires into the wall box, leaving enough space for the switch.
2. Insert the switch into the wall box and secure it with the provided mounting screws. Use the break-off plaster ears for flush alignment if needed.
3. Attach the included wall plate over the switch and secure it with the smaller screws.
4. Restaura l'alimentació: Torneu a connectar l'alimentació a l'interruptor o a la caixa de fusibles.
5. Prova de funcionament: Test each rocker paddle to ensure proper ON/OFF functionality for its respective load.

Figure 3: Compact design and dimensions of the switch, ensuring compatibility with standard wall boxes.

5. Instruccions de funcionament

The ELEGRP Decorator Triple Rocker Switch provides simple control for three independent lighting or appliance loads.

• Each of the three paddles operates independently.
• To turn a connected load ON, press the upper part of the corresponding paddle.
• To turn a connected load OFF, press the lower part of the corresponding paddle.

Figure 4: The triple rocker switch allows control of three separate loads from a single wall box, optimizing space.

6. Manteniment

The ELEGRP Triple Rocker Switch requires minimal maintenance.

• Neteja: Per netejar l'interruptor i la placa de paret, netegeu-los amb un drap suau i sec.amp drap. No utilitzeu netejadors abrasius ni dissolvents, ja que poden danyar l'acabat.
• Inspecció: Periodically check the switch and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and address them promptly.

7. Solució De Problemes

If you experience issues with your ELEGRP Triple Rocker Switch, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, contact ELEGRP customer support or a qualified electrician.

8. Especificacions

9. Informació de la garantia

ELEGRP products are manufactured to high-quality standards and are backed by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ELEGRP weblloc.

10. Suport

For technical assistance, product inquiries, or warranty claims, please contact ELEGRP customer support through the following channels:

• En línia: Visita l'oficial ELEGRP Brand Store on Amazon.
• Correu electrònic: Refer to your product packaging or the brand store for specific contact email.