Manual d'usuari del seient de vàter Geberit 300 Basic amb tapa

1. Introducció

Thank you for choosing the Geberit 300 Basic Toilet Seat with Lid. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new toilet seat. Please read these instructions carefully before beginning installation and retain them for future reference.

Figure 1: Geberit 300 Basic Toilet Seat with Lid. This image shows the Geberit 300 Basic Toilet Seat with Lid in white, featuring its D-shaped design.

2. Informació de seguretat

• Always ensure the toilet bowl is clean and dry before installation.
• Do not use abrasive cleaners or harsh chemicals on the toilet seat, as this may damage the material.
• Avoid standing on the toilet seat or lid, as this can cause damage or injury.
• Keep small parts out of reach of children during installation.
• If any parts are missing or damaged, do not proceed with installation. Contact customer support.

3. Contingut del paquet

Si us plau, comproveu que hi hagi tots els components abans de començar la instal·lació:

• Geberit 300 Basic Toilet Seat
• Geberit 300 Basic Toilet Lid
• Maquinari de muntatge (cargols, volanderes, femelles)

4. Configuració i instal·lació

Follow these steps to install your Geberit 300 Basic Toilet Seat:

1. Preparar la tassa del vàter: Ensure the toilet bowl's mounting holes are clean and free of debris. If replacing an old seat, remove it completely.
2. Position the Mounting Hardware: Insert the bolts through the mounting holes on the toilet bowl.
3. Fixeu el seient: Place the toilet seat onto the bolts, aligning the seat's hinge points with the bolts.
4. Secure the Seat: Des de sota la tassa del vàter, col·loca les volanderes als cargols, seguit de les femelles. Estreny les femelles a mà inicialment.
5. Ajustar l'alineació: Adjust the position of the seat to ensure it is centered and aligned with the toilet bowl.
6. Ajustament final: Once aligned, fully tighten the nuts. Do not overtighten, as this can damage the ceramic or the seat.

Refer to the diagrams below for product dimensions to ensure compatibility with your toilet bowl:

Figura 2: superior View Dimensions. A technical drawing illustrating the top-down view of the toilet seat, indicating a width of 370mm and a length of 445mm.

Figura 3: lateral View Dimensions. A technical drawing illustrating the side profile of the toilet seat, showing a height of approximately 5mm for the lid.

5. Instruccions de funcionament

The Geberit 300 Basic Toilet Seat is designed for straightforward use:

• To use the toilet, simply lift the lid and then the seat.
• After use, gently lower the seat and then the lid.

6. Manteniment i Neteja

Proper maintenance ensures the longevity and hygiene of your toilet seat:

• Neteja regular: Clean the toilet seat regularly with a mild soap solution and a soft cloth.
• Eviteu productes químics durs: Do not use abrasive cleaners, scouring pads, or strong chemical detergents, as these can scratch or discolor the plastic surface.
• Assecat: Always dry the seat thoroughly after cleaning to prevent water spots and maintain hygiene.
• Cura de les frontisses: Periodically check the hinge connections for tightness. If the seat feels loose, gently retighten the mounting nuts.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

For warranty information or technical support, please refer to the official Geberit website or contact your local Geberit dealer. Please have your model number (S8H51203000G) available when contacting support.

Fabricant: Geberit

Data de disponibilitat a Amazon.com.be: 8 de novembre de 2021