Retekess TD157 Vibrating Pager System Instruction Manual

1. Introducció

Thank you for choosing the Retekess TD157 Vibrating Pager System. This wireless paging system is designed to enhance customer service and operational efficiency in various settings such as restaurants, food trucks, cafes, and bars. It provides a reliable method for notifying customers when their order is ready or when they are needed.

2. Informació de seguretat

• Mantingueu el dispositiu allunyat de l'aigua i d'ambients amb molta humitat.
• No desmunteu ni intenteu reparar el dispositiu vosaltres mateixos. Poseu-vos en contacte amb personal de servei qualificat.
• Feu servir només l'adaptador de corrent proporcionat per evitar danys.
• Eviteu exposar el dispositiu a temperatures extremes o a la llum solar directa.
• Mantenir fora de l'abast dels nens.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• Transmitter Keyboard x 1
• Pagers x 10
• Adaptador d'alimentació x 1
• Manual d'instruccions x 1

4. Producte acabatview

The Retekess TD157 system consists of a main transmitter unit and multiple guest pagers. The transmitter is used to call individual pagers, which then alert the customer through vibration, flashing lights, or a beep.

4.1 Característiques clau

• Enhanced Alert Modes: Choose between Flash + Vibration, Flash + Vibration + Buzzer, or other combinations to suit your environment.
• Llarg abast operatiu: Up to 400m (984ft) in open, line-of-sight conditions, with stable signal penetration through walls.
• Bateria d'alta capacitat: 200mAh Li-Ion battery in each pager provides over 15 hours of standby time. Pagers automatically charge when placed in the main unit.
• Customizable Advertising Area: Pagers feature an area for promotional stickers.
• Durada del recordatori ajustable: Set the alert duration from 1 to 99 seconds.
• Sistema ampliable: Supports up to 997 pagers.

5. Configuració

5.1 Càrrega inicial

Before first use, place all pagers into the charging slots on the transmitter keyboard. Ensure the power adapter is connected to the transmitter and a power outlet. The pagers will begin charging automatically. A full charge takes approximately 7 hours.

5.2 Pager Pairing

Pagers are typically pre-paired. If you need to pair new pagers or re-pair existing ones:

1. Remove the shell plate from the pager to access the internal buttons.
2. Press the upper corner button and the front button simultaneously until the pager enters pairing mode (lights will flash).
3. On the transmitter keyboard, enter the desired pager number (e.g., "01") and press the "CALL" button.
4. The pager will beep, flash, and vibrate to confirm successful pairing.
5. Replace the shell plate.

5.3 Setting Alert Modes (F2 Pager's Prompt modes)

The system offers various alert modes for pagers. To change the mode:

1. Long press the "Set" button (gear icon) on the transmitter until "F1" appears.
2. Use the UP/DOWN arrows to navigate to "F2".
3. Press "CALL".
4. Enter the corresponding code for the desired mode:
   • 004: Beep
   • 005: Vibrate
   • 006: Flaix
   • 007: Beep + Vibrate
   • 008: Vibrate + Flash
   • 009: Beep + Flash
   • 010: Beep + Flash + Vibrate
5. Place the pager you wish to configure into a charging slot. The pager will update to the selected mode.

5.4 Setting Call Time (F3 Prompt Time)

To adjust how long the pager alerts:

1. Long press the "Set" button (gear icon) on the transmitter until "F1" appears.
2. Use the UP/DOWN arrows to navigate to "F3".
3. Press "CALL".
4. Enter the desired duration in seconds (1-999) and press "CALL" to save.

5.5 How to Mute the Pagers (Turn off Beep)

If you wish to disable the beep function on a pager, allowing only vibration or flash:

1. Remove the shell plate from the pager.
2. Continuously press the middle button on the pager until all five indicator lights turn off.
3. Then, press the side button on the pager. The pager will now be muted (no beep).
4. To re-enable the beep, repeat the process: continuously press the middle button until the side lights are on, then press the side button.

6. Instruccions de funcionament

6.1 Giving a Pager to a Customer

When a customer places an order or is waiting, give them a charged pager from the transmitter unit. Note the pager number for future reference.

6.2 Crida a un cercapersones

When an order is ready or a customer is needed:

1. On the transmitter keyboard, enter the pager number (e.g., "01").
2. Press the "CALL" button. The corresponding pager will activate its set alert mode (vibrate, flash, or beep).

6.3 Returning a Pager

Once the customer returns the pager, place it back into any available charging slot on the transmitter unit. This will stop the alert and begin recharging the pager.

6.4 One-Click Group Call

To call all active pagers simultaneously, press the "0" button followed by the "CALL" button on the transmitter. All pagers will activate their alert modes.

6.5 One-Click Shutdown

To turn off all active pagers simultaneously, press the "DEL" button followed by the "CALL" button on the transmitter. All pagers will cease their alert modes and power down.

7. Manteniment

• Neteja: Use a soft, dry cloth to clean the transmitter and pagers. Avoid abrasive cleaners or solvents.
• Cura de la bateria: Ensure pagers are regularly charged to maintain battery health. Avoid leaving them fully discharged for extended periods.
• Emmagatzematge: When not in use for a long time, store the system in a cool, dry place.

8. Solució De Problemes

9. Especificacions

10. Garantia i Suport

For warranty information and technical support, please refer to the contact details provided in your product packaging or visit the official Retekess weblloc. Conserveu el rebut de compra per a reclamacions de garantia.