1. Informació de seguretat
ADVERTIMENT: This chair requires assembly. Always follow the assembly instructions carefully to ensure safe and proper installation. Do not attempt to assemble the chair without the provided tools and instructions.
This chair has adjustable features. Always use these features with caution to prevent injury. Do not exceed the maximum weight recommendation of 330 lliures to ensure the safety and stability of the chair.
2. Producte acabatview
The VINGLI Criss Cross Legged Chair is designed for comfort and versatility in various settings, including home offices, bedrooms, and study areas. It features an ergonomic design with curved lines and is upholstered in soft teddy fleece.
Característiques principals:
- Disseny ergonòmic: Curved backrest and seat for enhanced comfort and support.
- Material: Soft teddy fleece upholstery.
- Construcció sòlida: Robust base with an SGS-certified gas lift cylinder, supporting up to 330 lbs.
- Versatile Dual-Use Base: Easily convertible between mobile (casters) and stationary (foot pegs) use.
- Funcions ajustables: 360° swivel, height adjustment (4 inches), and tilting function (105-120 degrees).
- Armless Design: Allows for sitting cross-legged and saves space.
Figure 2.1: VINGLI Criss Cross Legged Chair (Pink Teddy Fleece)
3. Contingut del paquet
Si us plau, reviseu el paquet amb cura per assegurar-vos que tots els components hi són i no estan danyats. Si hi falta alguna peça o hi ha alguna peça danyada, poseu-vos en contacte amb el servei d'atenció al client.
- Conjunt de seient i respatller de cadira
- Base (Base Estel·lar)
- Cilindre d'elevació de gas
- Rodes (5 peces)
- Foot Pegs (5 pieces)
- Maquinari de muntatge (cargols, volanderes, etc.)
- Eina de muntatge (clau Allen)
- Manual d'instruccions
4. Instruccions de muntatge
Follow these steps to assemble your VINGLI Criss Cross Legged Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Enganxeu la base: Insert the gas lift cylinder into the center hole of the star base.
- Install Casters or Foot Pegs: Firmly push the 5 casters into the holes at the end of each leg of the star base. Alternatively, if you prefer a stationary chair, insert the 5 foot pegs instead. Ensure they are securely seated.
Figure 4.1: Dual-Use Base Options (Casters or Foot Pegs)
- Connecteu el seient a l'elevador de gas: Place the chair seat assembly onto the top of the gas lift cylinder. Apply downward pressure to ensure it is securely connected.
- Secure Backrest: Attach the backrest to the seat using the provided hardware. Ensure all screws are tightened evenly with the included Allen wrench. Do not overtighten.
Once assembled, test the chair's stability and all adjustable functions before regular use.
5. Funcionament de la cadira
Your VINGLI chair offers several adjustable features for personalized comfort.
- Ajust d'alçada: To raise the seat, lift the lever located under the seat while standing. To lower the seat, lift the lever while seated.
- Giració de 360°: The chair seat can freely rotate 360 degrees.
- Funció d'inclinació: The chair features a rocking function with a tilt range of 105 to 120 degrees. Use the lever under the seat to engage or disengage the tilt. A separate knob may be present to adjust the tension of the tilt mechanism.
Figure 5.1: Multimodal Function Variation
6. Cura i Manteniment
Una cura adequada allargarà la vida útil i l'aspecte de la vostra cadira.
- Neteja: For the teddy fleece upholstery, gently spot clean with a mild detergent and a damp cloth. Avoid harsh chemicals or abrasive cleaners. Allow to air dry completely.
- Inspecció periòdica: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
- Eviteu la llum solar directa: Prolonged exposure to direct sunlight may cause fading of the fabric.
- Límit de pes: No supereu la capacitat màxima de pes de 330 lliures.
7. Solució De Problemes
Si teniu algun problema amb la cadira, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| La cadira està trontollant | Cargols solts o muntatge desigual. | Check and tighten all assembly screws. Ensure the base is fully seated on the gas lift. |
| Height adjustment not working | Gas lift not properly installed or damaged. | Ensure the gas lift is fully inserted into the base and seat mechanism. If still not working, contact customer support. |
| Chair does not tilt or tilts too easily/hard | Tilt lock engaged or tension knob incorrectly adjusted. | Disengage the tilt lock lever. Adjust the tilt tension knob (usually under the seat) to your preference. |
| Casters/Foot pegs fall out | Not fully inserted. | Firmly push the casters/foot pegs into the base until they click into place. |
8. Especificacions
Figura 8.1: Dimensions de la cadira
| Característica | Detall |
|---|---|
| Marca | VINGLI |
| Número de model | SF20250910B0DS1JMHZ2 |
| Color | Rosa |
| Dimensions del producte (total) | 19.1"D x 25"W x 33"-37"H |
| Amplada del seient | 24.4 polzades |
| Profunditat del seient | 19.1 polzades |
| Alçada del seient | 19.3-23.2 polzades |
| Alçada del respatller | 16.1 polzades |
| Pes de l'article | 28 lliures |
| Recomanació de pes màxim | 330 lliures |
| Estil | Teddy Fleece |
| Material base | Metall |
| Material de farciment | High-density Memory Foam |
| Estil de braç | Sense braç |
| Components inclosos | Eines i instruccions de muntatge |
9. Atenció al client
For any questions, missing parts, or assistance with assembly or operation, please contact VINGLI customer support. Refer to your purchase documentation for specific contact details or visit the official VINGLI weblloc.
Venedor: VINGLI-Direct
Nota: No specific warranty information was provided in the product details. Please refer to your purchase receipt or contact the seller for warranty terms and conditions.
