Manual d'usuari del suport de telèfon ThinkRider C1 MTB

1. Introducció

Thank you for choosing the ThinkRider C1 MTB Phone Mount Stand. This manual provides essential information for the proper installation, operation, and maintenance of your new phone mount. Please read these instructions carefully before use to ensure optimal performance and safety.

Image 1.1: The ThinkRider C1 Phone Mount Stand, highlighting its aluminum alloy construction and two-way adjustment capability.

2. Característiques del producte

• Amplada ajustable: Compatible with most mobile phones and GPS devices, adjustable from 55mm to 95mm to fit 4 to 7-inch phones.
• Construcció duradora: Made from high-strength aluminum alloy for secure phone retention on various terrains.
• Unobstructed Screen: Designed to keep your phone screen fully visible.
• Rotació de 360 ​​graus: Permet flexibilitat viewing angle adjustments without needing to uninstall the mount.
• Àmplia compatibilitat: Installs on handlebars with diameters of Φ31.8mm, Φ25.4mm, and Φ22.2mm. Suitable for motorcycles, mountain bikes (MTB), road bikes, e-bikes, folding bikes, and scooters.

3. Què hi ha a la caixa

• ThinkRider C1 Phone Mount Stand (1 unit)
• Handlebar shims for various diameters
• Rubber bumper pads (for phone grip)
• Clau Allen (per instal·lar)

4. Configuració i instal·lació

4.1 Attaching the Mount to the Handlebar

1. Identify the desired position on your handlebar. Ensure it does not obstruct your view or control of the vehicle.
2. Select the appropriate rubber shim(s) for your handlebar diameter (Φ31.8mm, Φ25.4mm, or Φ22.2mm). Place the shim(s) around the handlebar at the chosen location.
3. Position the mount's clamp around the shimmed handlebar. Insert the two screws through the clamp and tighten them evenly using the provided Allen key until the mount is secure and does not rotate freely. Do not overtighten.

Image 4.1: The ThinkRider C1 Phone Mount securely attached to a bicycle handlebar, demonstrating its wide practical range of use.

4.2 Installing Rubber Bumper Pads

1. Locate the adhesive-backed rubber bumper pads.
2. Carefully peel the backing from each pad.
3. Apply the pads to the inner surfaces of the mount's four claws and the bottom support arms where your phone will rest. These pads provide cushioning and enhance grip. Ensure they are firmly pressed into place.

4.3 Adjusting Mount Angle and Orientation

1. The mount features a ball joint for angle adjustment. Loosen the locking nut on the ball joint to adjust the viewangle de ing.
2. Once the desired angle is achieved, tighten the locking nut firmly to secure the position.
3. The phone holder itself can be rotated 360 degrees. Simply rotate the phone holder to switch between portrait and landscape orientations as needed.

Image 4.2: The mount allows for easy switching between vertical (portrait) and horizontal (landscape) phone orientations.

5. Instruccions de funcionament

5.1 Inserció del telèfon

1. Turn the adjustment knob on the side of the mount counter-clockwise to expand the phone claws to a width greater than your phone.
2. Place your phone into the mount, ensuring it rests securely on the bottom support arms.
3. Turn the adjustment knob clockwise to securely grip your phone. Ensure the phone is held firmly by the four claws and does not wobble. The mount is designed to accommodate phones from 55mm to 95mm in width.

Image 5.1: The four-claw design provides a secure grip for your mobile phone.

5.2 Extracció del telèfon

1. Turn the adjustment knob counter-clockwise to release the grip on your phone.
2. Carefully remove your phone from the mount.

5.3 Ajust Viewing Angle During Use

The 360-degree rotation feature allows you to adjust your phone's orientation (portrait or landscape) at any time without removing it. For tilt adjustments, slightly loosen the ball joint locking nut, reposition the phone to your desired angle, and then re-tighten the nut.

Image 5.2: The multi-angle adjustment allows for optimal viewing for navigation, video recording, or live streaming.

6. Manteniment

• Neteja: Netegeu la muntura amb un drap suauamp drap per eliminar la pols i la brutícia. Eviteu utilitzar productes químics aggressivs o netejadors abrasius.
• Comprovar l'estanquitat: Periodically check all screws and adjustment knobs to ensure they are securely tightened, especially after riding on rough terrain.
• Inspeccionar les coixinetes: Ensure the rubber bumper pads are intact and securely attached. Replace if they show signs of wear or detachment to maintain optimal grip and phone protection.
• Emmagatzematge: When not in use for extended periods, store the mount in a clean, dry place away from direct sunlight.

7. Solució De Problemes

• Phone feels loose in the mount: Ensure the adjustment knob is fully tightened. Verify that the rubber bumper pads are properly installed and not worn. If the phone is too small for the 55mm minimum width, it may not be compatible.
• Mount rotates on the handlebar: Check that the handlebar clamp screws are tightened evenly and firmly. Ensure the correct size rubber shims are used for your handlebar diameter.
• Phone angle shifts during ride: Tighten the locking nut on the ball joint more firmly.
• Screen reflection/glare: Utilize the 360-degree rotation and ball joint adjustment to reposition your phone and minimize glare from the sun or other light sources.

8. Especificacions

Image 8.1: Detailed product parameters for the ThinkRider C1 Phone Mount Stand.

9. Suport

For further assistance, product information, or to explore other ThinkRider products, please visit the official ThinkRider store:

Visit the ThinkRider Store on Amazon