xTool F1 Lite Laser Engraver User Manual

1. Introducció

The xTool F1 Lite is a portable and high-speed laser engraving machine designed for precision and versatility. It features a 10W diode laser, enabling rapid engraving and cutting on a wide range of materials. Its compact design and user-friendly interface make it suitable for both beginners and experienced users.

The xTool F1 Lite Laser Engraver in operation, demonstrating its ability to engrave on cylindrical objects like tumblers.

An infographic detailing the xTool F1 Lite's key features, including its 4000mm/s speed, Ultra HD detail, portability, and support for over 300 materials.

2. Configuració i primer ús

The xTool F1 Lite is designed for quick and easy setup. It comes pre-assembled, allowing you to begin creating almost immediately after unboxing. Follow these general steps for initial setup:

1. Unboxing: Traieu amb cura tots els components de l'embalatge.
2. Col·locació: Place the engraver on a stable, flat surface in a well-ventilated area.
3. Connexió d'alimentació: Connect the power adapter to the engraver and then to a power outlet.
4. Instal·lació de programari: Download and install the XCS software on your computer or mobile device. The software is intuitive and widely used.
5. Col·locació del material: Place your desired material on the engraving platform.
6. Auto-Focus & Live Preview: Utilize the auto-focus feature and live preview in the XCS software to ensure precise positioning and optimal engraving results, minimizing material waste.

The simplified customization process: Design patterns on a mobile device, preview the position on the engraver, and achieve the final engraved result.

3. Instruccions de funcionament

The xTool F1 Lite offers lightning-fast engraving speeds of 4000mm/s, allowing for quick completion of projects. Its Ultra Galvo system ensures high precision, capturing intricate details with accuracy.

Supported Materials and Engraving Capabilities

The 10W diode laser of the F1 Lite is capable of engraving and cutting a wide variety of materials. Note that the F1 Lite features a 10W diode laser only and does not support direct engraving on all metals or rubber, unlike models with an infrared laser.

• Gravat: Wood, Leather, Acrylic, Glass, Rock (Slate), Paper, Cork, Stainless Steel, Coated Metals.
• Tall: Up to 8mm Basswood (multiple cuts), Up to 6mm dark opaque Acrylic (multiple cuts), Paper, Leather.

The xTool F1 Lite demonstrating its capability to engrave on over 300 different materials, including paper, wood, leather, and more.

Un detallat view of an engraved image, showcasing the high-definition resolution and precision achievable with the xTool F1 Lite.

Vídeos oficials de productes

4. Manteniment

Regular maintenance ensures the longevity and optimal performance of your xTool F1 Lite. Always power off and unplug the device before performing any maintenance.

• Neteja de la lent: Netegeu periòdicament la lent del làser amb un drap suau i sense borrissol i una solució netejadora de lents per mantenir la qualitat del gravat.
• Cleaning the Engraving Platform: Remove debris and dust from the engraving platform after each use to prevent buildup that could affect material placement or engraving results.
• Sistema de ventilació: Ensure the built-in fan and ventilation openings are clear of obstructions to maintain proper airflow and smoke extraction.
• Neteja general: Wipe down the exterior of the machine with a dry or slightly damp tela. Eviteu utilitzar productes químics aggressivs.

The xTool F1 Lite features a fully enclosed design for enhanced safety, including laser light-proof housing and a smoke-free built-in fan.

5. Solució De Problemes

If you encounter issues with your xTool F1 Lite, refer to the following common troubleshooting tips. For more complex problems, please contact customer support.

• El gravador no s'encén: Check the power cable connection to both the engraver and the power outlet. Ensure the power switch is in the 'On' position.
• Problemes de connexió de programari: Verify that the engraver is properly connected to your computer or mobile device via USB or Bluetooth. Restart the XCS software and the engraver.
• Mala qualitat del gravat: Ensure the material is correctly focused. Clean the laser lens. Adjust engraving parameters (power, speed, passes) in the XCS software according to the material type.
• El làser no dispara: Check if the safety cover is properly closed. Ensure the emergency stop button is not pressed.
• Sorolls inusuals: Power off the machine immediately and inspect for any obstructions or loose parts. Do not operate if unusual noises persist.

6. Especificacions

7. Informació de la garantia

The xTool F1 Lite Laser Engraver comes with a Garantia limitada de 1 anys from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official xTool weblloc o contacteu amb el servei d'atenció al client.

8. Atenció al client

For any questions, technical assistance, or support needs, xTool provides multi-channel service options:

• Suport per correu electrònic: Reach out via email for detailed inquiries.
• Xat en directe: Access live chat support for immediate assistance.
• Suport telefònic: Contact our technical service team by phone.
• Grup de Facebook: Join the official xTool Facebook group for community support, tips, and discussions.

Our technical service team is dedicated to providing prompt and helpful responses to ensure a smooth experience with your xTool F1 Lite.