1. Introducció
Thank you for choosing the BONTEC Single Monitor Stand. This adjustable gas spring arm monitor desk mount is designed to enhance your workspace ergonomics and free up valuable desk space. It is compatible with 15-32 inch screens and supports VESA 75x75mm and 100x100mm patterns. This manual provides detailed instructions for safe installation, operation, and maintenance of your monitor stand.
2. Informació de seguretat
Please read all instructions carefully before assembly and use. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer. Improper installation may cause damage or serious injury.
- No supereu la capacitat màxima de pes de 19.8 lliures (9 kg).
- Ensure the mounting surface (desk) is strong enough to support the combined weight of the stand and your monitor.
- No apretar massa els cargols. Apretar massa pot causar danys al vostre equip.
- Mantingueu els nens i les mascotes allunyats durant la instal·lació.
- Feu servir sempre les eines i el maquinari proporcionats.
- Reviseu periòdicament tots els cargols i connexions per assegurar-vos que estiguin ben fixats.
3. Contingut del paquet
Verify that all components are present and undamaged. If any parts are missing or damaged, please contact BONTEC customer service.
| Component | Descripció | Quantitat |
|---|---|---|
| Conjunt del braç del monitor | Main gas spring arm and VESA plate | 1 |
| C-Clamp Base | For desk edge mounting | 1 |
| Base d'oelles | For through-desk hole mounting | 1 |
| Kit de maquinari | Screws, washers, spacers, Allen keys | 1 conjunt |
| Clips de gestió de cables | For organizing cables along the arm | Inclòs |
4. Configuració i instal·lació
The BONTEC Single Monitor Stand offers two installation methods: C-Clamp mounting and Grommet mounting. Choose the method that best suits your desk setup.
4.1 Compatibilitat amb l'escriptori
- Gruix de l'escriptori: 0.39" to 3.15" (10mm to 80mm) for both C-Clamp i muntatge amb ulleres.
- Grommet Hole Diameter: 0.4" to 2.4" (10mm to 60mm) for Grommet mounting.
4.2 Compatibilitat VESA
This monitor stand supports VESA mounting patterns of 75x75mm and 100x100mm. Ensure your monitor has one of these patterns before proceeding.
Image: The BONTEC Single Monitor Stand showcasing both C-Clamp i opcions de muntatge amb ulleres.
Image: Detailed illustration of the C-Clamp and Grommet mounting options, including supported desk thicknesses.
4.3 Passos d'instal·lació (General)view)
- Assemble the chosen desk mounting base (C-Clamp or Grommet) to the main pole.
- Secure the pole to your desk according to the chosen mounting method.
- Attach the VESA plate to the back of your monitor using the appropriate screws.
- Slide the monitor with the attached VESA plate onto the monitor arm.
- Adjust the gas spring tension to match your monitor's weight (refer to Operating Instructions).
- Utilize the snap-in cable management system to route and hide cables for a clean workspace.
Image: The monitor arm demonstrating its innovative snap-in cable management system, keeping cables organized and out of sight.
4.4 Guia de vídeo d'instal·lació
Video: Official BONTEC Single Monitor Stand installation and feature overview. This video demonstrates the assembly process and highlights key features of the monitor arm.
5. Instruccions d'ús i ajustos
The BONTEC monitor stand offers full motion adjustability to achieve optimal viewangles d'ajust i posicionament ergonòmic.
5.1 Range of Motion
- Inclinació: ±90° (up/down)
- Girar: ±90° (left/right)
- Rotació: 360° (portrait to landscape)
- Extensió màxima: 21.3 polzades
- Alçada màxima: 17.7 polzades
Image: Visual representation of the monitor arm's flexible viewing experience, detailing tilt, swivel, and 360-degree rotation capabilities.
Image: Illustration highlighting the built-in gas spring support, ensuring smooth and stable adjustments.
5.2 Ajust de la tensió de la molla de gas
The gas spring tension needs to be adjusted to match the weight of your monitor for optimal movement and stability. Use the provided Allen key.
- If the monitor droops or falls, turn the tension screw en sentit antihorari per augmentar la tensió.
- If the monitor rises too easily or is difficult to push down, turn the tension screw en sentit horari to reduce tension.
- Adjust gradually, testing the arm's movement after each turn. Do not exceed 8 turns in either direction from the initial setting.
5.3 Tilt and Swivel Adjustment
If the monitor tilt or swivel is too loose or too stiff, use the appropriate Allen key to adjust the screws on the U-shaped joint head. Turn clockwise to tighten, counter-clockwise to loosen.
5.4 Adjustment Video Guide
Video: Important tips for adjusting the tilt, swivel, and gas spring tension of the monitor arm to ensure smooth and stable operation.
6. Manteniment
Un manteniment regular garanteix la longevitat i el rendiment òptim del suport del monitor.
- Neteja: Netegeu el suport amb un drap suauamp drap. Eviteu productes de neteja abrasius o dissolvents que puguin danyar l'acabat.
- Inspecció: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que estiguin ben ajustats. Torneu a apretar-los si cal.
- Molla de gas: The gas spring is designed for long-term use (30,000 cycles tested) and generally requires no maintenance. However, if you notice significant changes in its performance, refer to the tension adjustment section.
7. Solució De Problemes
If you encounter issues with your monitor stand, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Monitor droops or falls | La tensió de la molla de gas és massa baixa per al pes del monitor. | Increase gas spring tension by turning the screw counter-clockwise (Max 8 turns). Refer to Section 5.2. |
| Monitor rises too easily or is hard to push down | La tensió de la molla de gas és massa alta per al pes del monitor. | Decrease gas spring tension by turning the screw clockwise (Max 8 turns). Refer to Section 5.2. |
| Monitor tilt/swivel is loose | Tilt/swivel joint screw is loose. | Tighten the tilt/swivel joint screw clockwise using the appropriate Allen key. Refer to Section 5.3. |
| Monitor arm feels unstable | Escriptori clamp/grommet base is not securely tightened. | Ensure the C-Clamp or Grommet base is securely fastened to the desk. Check all connection points. |
8. Especificacions
| Característica | Detall |
|---|---|
| Número de model | GDM7501-v02-FBA |
| Mida de pantalla compatible | 15 - 32 polzades |
| Capacitat de pes | Fins a 19.8 lliures (9 kg) |
| Compatibilitat VESA | 75x75mm, 100x100mm |
| Opcions de muntatge | C-Clamp, Base d'orella |
| Gruix de l'escriptori (C-Cl)amp/Ullerol) | 0.39" - 3.15" (10 mm - 80 mm) |
| Diàmetre del forat del grommet | 0.4" - 2.4" (10 mm - 60 mm) |
| Interval d'inclinació | ±90° |
| Gamma giratòria | ±90° |
| Rotació | 360° |
| Extensió màxima | 21.3 polzades |
| Altura màx | 17.7 polzades |
| Material | Aluminum, Metal (Zinc) |
| Color | Negre |
9. Garantia i assistència
BONTEC products are manufactured with high-quality materials and undergo rigorous testing to ensure durability and performance. For warranty information, technical support, or any questions regarding your product, please contact BONTEC customer service through the retailer where you purchased the product or visit the official BONTEC weblloc.
Informació de contacte: Please refer to your purchase documentation or the BONTEC official weblloc web per obtenir les dades de contacte més actualitzades.
