ESR 2 Pack Screen Protector for iPad A16 11th/10th Generation (11 Inch/10.9, 2025/2022) Instruction Manual

Introducció

This manual provides detailed instructions for the installation and care of your ESR 2 Pack Screen Protector. Designed for the iPad A16 11th Generation (2025) and iPad 10th Generation (2022), this tempered glass film offers robust protection and maintains optimal screen performance. Please read all instructions carefully before proceeding with installation.

Contingut del paquet

• 2x ESR Tempered Glass Screen Protectors
• 1x UltraFit Installation Tray
• 2x Wet Wipes (Step 1)
• 2x Microfiber Cloths (Step 2)
• 2x Dust Removal Stickers (Step 3 & 4)
• 1 x manual d'instruccions

Compatibilitat

This ESR Screen Protector is specifically designed for the following iPad models:

• iPad 11" (A16) 2025
• iPad 10th Gen 2022

Compatible model numbers include: A3354, A3355, A2696, A2757. Aquest producte és no compatible with other 11-inch iPad models such as iPad Air 11" or iPad Pro 11".

Image: Visual guide for checking iPad model compatibility. The image displays the correct iPad 11" (A16) 2025 / 10th Gen 2022 model and highlights where to find the model number on the back of the device. Incompatible models like iPad Air 10.9" and iPad Air 11" are also shown for comparison.

Configuració i instal·lació

The ESR UltraFit Installation Tray ensures a simple, dust-free, and bubble-free application process. Follow these steps carefully:

Guia d'instal·lació pas a pas

1. Prepareu el vostre espai de treball: Ensure you are in a clean, dust-free environment. Wash your hands thoroughly.
2. Clean Your iPad Screen:
   • Utilitzeu el proporcionat Wet Wipe (Step 1) to thoroughly clean the iPad screen, removing all smudges and fingerprints.
   • Follow with the Microfiber Cloth (Step 2) to dry and polish the screen until it is spotless.
   • Utilitza el Dust Removal Sticker (Step 3 & 4) to pick up any remaining dust particles. Ensure the screen is completely free of dust.
   

   Image: A visual representation of the simple 2-step application process using the UltraFit Tray. The top panel shows placing the tablet screen face down on the pull tab inside the frame. The bottom panel shows closing the cover, holding it firmly, and pulling out the tab.

3. Place Screen Protector in Tray: Open the UltraFit Installation Tray. Carefully align the screen protector with the designated grooves in the tray. Ensure the 'TOP' indicator on the pull tab is correctly oriented.
4. Position Your iPad: Place your iPad screen-side down into the UltraFit tray. Ensure the iPad is securely seated and aligned with the tray's edges, particularly noting the camera cutout.
5. Apply the Screen Protector:
   • Close the top cover of the UltraFit tray firmly.
   • Gently press down on the 'Press here' area on the cover to ensure initial adhesion.
   • Slowly and evenly pull the green 'Pull tab' out from the bottom of the tray in a single, continuous motion. This action will automatically apply the screen protector to your iPad. Avoid lifting the tab, moving it from the center, or pulling at an uneven speed.
   

   Image: A detailed visual guide for the 2-step application. The first step shows placing the tablet screen face down on the pull tab inside the frame. The second step illustrates closing the cover firmly while pulling out the tab to apply the screen protector.

6. Remove iPad and Finish: Open the UltraFit tray and carefully remove your iPad. If any small bubbles remain, gently push them towards the edges of the screen using the microfiber cloth or your fingers.

Vídeo d'instal·lació

Característiques i avantatges

• Powerful 9H Hardness Protection: The tempered glass effectively withstands external impact, protecting your screen from scratches and cracks caused by drops, keys, or cables. This ensures long-lasting clarity and screen integrity.

  Image: Illustration of the screen protector's durability, highlighting it as 'Classic 2X Stronger' than standard protectors, with a visual of a steel ball drop test.

  

  Image: A visual demonstration of the screen protector's 9H scratch resistance, showing keys and pencils unable to damage the surface.

• Sensitive Touch Response: At only 0.3 mm thick, the screen protector maintains the original screen feel, ensuring smooth gaming, video playback, and writing with the Apple Pencil without any lag.

  Image: A user is shown playing a racing game on an iPad, emphasizing the highly responsive touch sensitivity provided by the ultra-thin screen protector.
• HD Clarity: Ultra-transparency provides a clear visual experience, ensuring flawless Face ID functionality and pixel-perfect photos. The surface coating also effectively prevents stains and fingerprints, making the touchscreen smoother and easier to clean.

  Image: An iPad screen displaying a vibrant, high-definition image of a skier, illustrating the HD clarity and ultra-transparency of the screen protector.

  

  Image: A comparison showing the fingerprint resistance of the ESR screen protector (clean) versus other screen protectors (smudged), highlighting the oleophobic coating.

• Dust-Free, Bubble-Free Application: The UltraFit tray and dust removal strip ensure an instant, bubble-free, and dust-free application, simplifying the installation process.

  Imatge: Un primer pla view of the dust removal strip in action, ensuring a clean, dust-free application of the screen protector.

Especificacions

Garantia i Suport

ESR provides complete customer support, including detailed setup videos, FAQs, a comprehensive 12-month protection plan, unlimited support, and personalized help. For any issues or inquiries, please refer to the contact information provided in your package or visit the official ESR support weblloc.