VINGLI Metal Bunk Bed Frame Twin Over Twin with LED Lights and Charging Station

1. Introducció

This manual provides detailed instructions for the assembly, operation, and maintenance of your VINGLI Metal Bunk Bed Frame. Please read this manual thoroughly before assembly and use to ensure safe and proper functionality of the product.

Característiques principals:

• Construcció metàl·lica resistent: Made from 100% solid metal for durability and stability.
• Seguretat millorada: Features a non-slip ladder, rounded-corner guardrails, and a 13.4-inch high full-length guardrail for maximum protection.
• Estació de càrrega integrada: Includes 1 Type-C port, 1 USB port, and 2 AC outlets for convenient device charging.
• Il·luminació LED personalitzable: LED lights with 7 basic colors, adjustable brightness, and control via remote or mobile app to create a personalized ambiance.
• Disseny per estalviar espai: Twin over Twin configuration with 8 inches of under-bed clearance for additional storage.
• Muntatge fàcil: Snap-on slat installation for simplified setup.

2. Advertiments de seguretat importants

El no seguir aquestes advertències podria provocar lesions greus.

• Always assemble according to the provided instructions to ensure stability.
• Be cautious of pinch points and sharp edges during assembly and use.
• Do not exceed the maximum weight recommendation of 400 pounds (181 kg) per bed.
• Keep the area around the bed clear to prevent tripping hazards.
• La llitera de dalt no és adequada per a nens menors de 6 anys.
• Ensure all connections are tight before use and check periodically.
• Use only mattresses that are 8 inches or less in thickness for the upper bunk to maintain proper guardrail height.
• No enganxeu ni pengeu objectes a cap part del llit de llitera que no estiguin dissenyats per al seu ús amb el llit; per exemple,ample, but not limited to, hooks, belts, or jump ropes.
• Feu servir sempre l'escala per entrar i sortir de la llitera superior.

3. Contingut del paquet

Verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact VINGLI customer support.

• Bunk Bed Frame Components (Metal beams, slats, ladder)
• Baranes
• Light Kit (LED strip, remote control)
• Unitat d'estació de càrrega
• Assembly Hardware (Screws, bolts, nuts, washers)
• Assembly Tools (Hex key, wrench)
• Manual d'instruccions

4. Especificacions

Nota: Totes les mides són aproximades.

5. Muntatge i muntatge

Assembly of the VINGLI Metal Bunk Bed Frame requires careful attention to detail. It is highly recommended to have two people for assembly, especially when lifting and aligning larger components.

Passos de l'Assemblea General:

1. Desempaquetar i identificar les peces: Lay out all components and hardware on a clean, soft surface. Compare them with the parts list in your included instruction manual to ensure everything is present and undamaged.
2. Assemble Bed Ends: Attach the horizontal support bars to the vertical posts for both the upper and lower bed ends. Ensure all bolts are finger-tight at this stage.
3. Connecteu els rails laterals: With assistance, carefully lift and connect the side rails to the assembled bed ends. This step often requires holding the bed ends upright while securing the rails.
4. Instal·lar llistons: The bed features a snap-on slat design for convenience. Securely attach all slats to the bed frame. Ensure they are firmly in place to provide adequate mattress support.
5. Fixar l'escala: Secure the non-slip ladder to the designated attachment points on the bunk bed frame.
6. Instal·lar baranes de protecció: Attach the full-length guardrails to the upper bunk. Verify they are securely fastened.
7. Instal·leu l'estació de càrrega: Mount the removable charging station to the upper bunk's frame as indicated in the manual.
8. Instal·lar llums LED: Adhere the LED light strip to the underside of the upper bunk or desired location. Connect it to the power source.
9. Ajustament final: Un cop tots els components estiguin al seu lloc, estrenyeu sistemàticament tots els cargols i perns amb les eines proporcionades. No els estrenyeu massa.
10. Col·locació: Position the assembled bunk bed in its final location. Consider using wall anchoring if desired for added stability (check local regulations).

For detailed, step-by-step visual guidance, refer to the included assembly manual and the official product video below.

Image: Overall dimensions of the VINGLI Metal Bunk Bed Frame.

Image: Wall anchoring mechanism for enhanced stability.

Image: Detail of the snap-in mounting system for bed slats.

6. Instruccions de funcionament

6.1. Ús dels llums LED

The integrated LED lights offer customizable illumination for the lower bunk area. They can be controlled via the included remote control or a dedicated mobile application.

• Encès/apagat: Use the 'ON' or 'OFF' buttons on the remote to turn the lights on or off.
• Selecció de color: Choose from 7 basic colors using the color buttons on the remote.
• Ajust de brillantor: Ajusteu la intensitat de la llum mitjançant els botons de control de brillantor.
• Selecció del mode: Cycle through various lighting modes (e.g., flash, strobe, fade, smooth) using the 'MODE' buttons.
• Ajust de velocitat: For dynamic modes, adjust the speed of color changes using the 'SPEED' buttons.
• Control d'aplicacions mòbils: Download the specified mobile application (refer to the light kit instructions for app name and QR code) to access additional customization options, including a wider color palette and DIY lighting effects.

Image: VINGLI bunk bed with LED lights activated.

Image: Remote control for the Smart RGB LED lights.

6.2. Ús de l'estació de càrrega

The removable charging station provides convenient power access for your electronic devices.

• Connexió d'alimentació: Ensure the charging station is properly plugged into a functional wall outlet.
• Preses de CA: Use the two standard AC outlets (125V/12A) for devices requiring a wall plug.
• Ports USB: Utilize the 1 Type-C port (5V/2A) and 1 USB port (5V/2A) for charging compatible smartphones, tablets, and other USB-powered devices.
• Seguretat: Do not overload the charging station. Disconnect devices when not in use.

Image: Removable charging station with AC and USB ports.

7. Manteniment

7.1. Neteja

• Netegeu el marc metàl·lic amb un drap suauamp tela.
• Eviteu utilitzar productes químics agressius o netejadors abrasius, ja que poden danyar l'acabat.
• For the charging station, ensure it is unplugged before wiping with a dry cloth. Do not use liquid cleaners directly on the ports.

7.2. Controls periòdics

• Reviseu periòdicament tots els cargols i perns per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
• Inspect the ladder and guardrails for any signs of wear or damage.
• Ensure the LED light strip and charging station cables are not pinched or damaged.

8. Solució De Problemes

Problemes comuns i solucions:

• El llit sembla inestable: Ensure all assembly bolts are securely tightened. Check that the bed is placed on a level surface. Consider using wall anchoring if not already implemented.
• Els llums LED no funcionen: Check if the power adapter is properly plugged into both the wall outlet and the LED strip. Ensure the remote control has working batteries and is pointed directly at the receiver. Try controlling with the mobile app if available.
• Charging station not providing power: Verify the charging station's power cord is securely plugged into a live wall outlet. Test the outlet with another device. Ensure devices are properly connected to the ports.
• Peces que falten durant el muntatge: Refer to the package contents list. If parts are genuinely missing, contact VINGLI customer support with your purchase details.

9. Garantia i Suport

For warranty information, specific return policies, or technical support, please refer to the documentation included with your purchase or visit the official VINGLI store page on Amazon. Customer support is available to assist with any product-related inquiries.

Visit the VINGLI Store: VINGLI Official Store