Informació important de seguretat
Please read all instructions carefully before assembly and use. Failure to follow these instructions could result in serious injury or death.
- Supervisió d'un adult requerit: Never leave a child unattended in or near the playpen.
- Muntatge adequat: Ensure all panels and connectors are securely fastened before placing a child inside. Regularly check for loose parts.
- Superfície estable: Always place the playpen on a flat, level, and stable surface. The upgraded suction cups are designed to firmly fix the playpen to the ground.
- Sense escalada: Do not allow children to climb on the playpen panels.
- Prevenció de riscos: Keep cords, blinds, and other potential hazards away from the playpen. Remove any toys or objects that could be used as steps to climb out.
- Inspecció de danys: Do not use the playpen if any part is damaged, broken, or missing. Contact customer support for replacement parts.
- Franja d'edat: Suitable for toddlers aged 1-3 years.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar el muntatge.
- 2 x Dripex Playpen Panels (Grey White)
- Connecting Fittings (pre-attached or included)
Image: Two Dripex playpen expansion panels, one grey and one white, shown connected. These panels are designed to expand an existing playpen setup.
Instruccions de configuració
These panels are designed to expand your existing Dripex Combination Baby Playpen or to change its shape. Ensure you have your main playpen unit ready before proceeding.
- Prepare Existing Playpen: If you are adding these panels to an existing playpen, identify the points where you wish to expand. You may need to loosen the plastic connecting fittings on your current playpen to integrate the new panels.
- Connecteu els panells: Align the connecting fittings of the new panels with the corresponding fittings on your existing playpen or with each other if forming a new section. Push the panels together firmly until the fittings click into place, ensuring a secure connection.
- Connexions segures: Ensure all plastic connecting fittings between the tops of the panels are tightened and secure. There should be no gaps between panels where a child's arm could get stuck.
- Activate Suction Cups: Press down firmly on the bottom of each panel to engage the upgraded suction cups. This will firmly fix the playpen to the ground, preventing it from tipping over.
- Comprovació final: Before placing a child inside, gently push and pull on the assembled playpen to confirm its stability and that all connections are secure.
Imatge: Un primer pla view of two Dripex playpen panels joined together, highlighting the secure connection points at the top and bottom.
Instruccions de funcionament
- Always ensure the playpen is fully assembled and all connections are secure before placing a child inside.
- Place the child gently into the playpen.
- Regularly check the playpen for any signs of wear, damage, or loose connections during use.
- Do not allow children to bring sharp objects or excessive weight into the playpen.
- The playpen is designed for indoor and outdoor use. When used outdoors, ensure it is on a flat surface and protected from extreme weather conditions.
Image: A child playing happily within a Dripex playpen, illustrating the safe and contained environment it provides.
Manteniment i cura
- Neteja: Wipe the panels with a damp cloth, then dry thoroughly with a clean, dry cloth. Do not use abrasive cleaners or harsh chemicals.
- Inspecció: Periodically inspect all parts for wear, damage, or loose connections. Ensure the suction cups are clean and functioning correctly.
- Emmagatzematge: When not in use, the panels can be folded for easy storage. Loosen the plastic connecting fittings between the tops of the panels and fold them together. Store in a cool, dry place away from direct sunlight.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Panels are not connecting securely. | Connecting fittings are not fully engaged or aligned. | Ensure fittings are properly aligned and push panels together firmly until they click. Check for any obstructions. |
| Playpen feels unstable or tips easily. | Suction cups not engaged or placed on an uneven surface. | Ensure the playpen is on a flat, level surface. Press down on each panel to activate the suction cups. Clean suction cups if they are dirty. |
| Gaps between panels. | Connecting fittings are loose or not fully secured. | Tighten all plastic connecting fittings. Ensure panels are pushed together tightly. |
Especificacions
| Product Dimensions (each panel) | Aproximadament 29 x 3 x 24 polzades (L x W x H) |
| Tipus de material | Polietilè d'alta densitat (HDPE) |
| Color | Gris Blanc |
| Instruccions de cura | Esborra amb anunciamp cloth, then a dry one |
| Normes de seguretat | Meets CPC standards |
| UPC | 840325630359 |
| ASIN | B0DSW7V5GF |
Garantia i Suport
Dripex products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your original Dripex Combination Baby Playpen or visit the official Dripex weblloc.
If you have any questions, require assistance with assembly, or need replacement parts, please contact Dripex customer support through their official channels or the retailer where the product was purchased.
