1. Introducció
This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Swagtron LCD Display Assembly. This display is an Original Equipment Manufacturer (OEM) part designed specifically for Swagtron EB7 and EB-7 Plus eBikes. Please read this manual thoroughly before installation and use to ensure proper function and safety.
The LCD Display Assembly provides essential information about your eBike's performance, including speed, battery level, and pedal assist mode. Proper installation and understanding of its functions will enhance your riding experience.
2. Informació de seguretat
- Always ensure the eBike is powered off before attempting any installation or maintenance on the display assembly.
- Disconnect the eBike's battery before working on electrical components to prevent electric shock or damage.
- If you are unsure about any part of the installation process, consult a qualified eBike technician.
- Do not expose the display to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Avoid using abrasive cleaners or solvents on the display screen, as this may damage the surface.
- Ensure all connections are secure after installation to prevent accidental disconnection during operation.
3. Configuració i instal·lació
3.1 Contingut del paquet
Abans de començar la instal·lació, comproveu que tots els components siguin presents al paquet:
- 1x Swagtron LCD Display Assembly (Model: 2013HE)
3.2 Eines necessàries (no incloses)
- Tornavís petit Phillips
- Joc de claus hexagonals (claus Allen)
- Cable ties (optional, for cable management)
3.3 Procediment d'instal·lació
Follow these steps to install the LCD Display Assembly on your Swagtron EB7 or EB-7 Plus eBike:
- Power Off eBike: Ensure your eBike is completely powered off and the battery is removed or disconnected for safety.
- Remove Old Display (if applicable): If replacing an existing display, carefully disconnect its wiring harness from the eBike's main wiring. Use a Phillips head screwdriver or hex key to loosen any mounting screws or clamps holding the old display to the handlebars. Remove the old display.
- Munta la nova pantalla: Position the new Swagtron LCD Display Assembly on your eBike's handlebars in a comfortable and visible location. Secure it using the provided clamp and screws. Do not overtighten.
- Connecteu el cablejat: Locate the corresponding wiring harness on your eBike. Carefully align and connect the display's wiring connector to the eBike's main wiring harness. Ensure the connection is firm and secure. (Note: The connector is typically keyed to prevent incorrect connection.)
- Cables segurs: Route the display cable neatly along the handlebars and frame, securing it with cable ties if necessary, to prevent it from interfering with steering or other components.
- Reconnect Battery & Test: Reconnect the eBike battery and power on the eBike. The display should illuminate and show initial readings.
If the display does not power on or shows an error, refer to the Troubleshooting section.
4. Instruccions de funcionament
The Swagtron LCD Display Assembly provides real-time information and control over your eBike's functions. Familiarize yourself with the display layout and button functions.
4.1 Display Layout (General)
While specific icons may vary slightly, a typical display will show:
- Velocitat: Current riding speed (MPH or KM/H).
- Nivell de bateria: Indicació de la càrrega restant de la bateria.
- Nivell d'assistència al pedaleig (PAS): Current level of motor assistance (e.g., 0-5).
- Comptaquilòmetres/Distància del trajecte: Total distance traveled or distance for the current trip.
- Indicador de fars: Shows if the eBike's headlight is on.
4.2 Funcions dels botons
The display typically features a few buttons for control:
- Botó d'encesa: Press and hold to turn the eBike and display ON/OFF. A short press may cycle through display information (e.g., Odometer, Trip).
- "+" Button: Increases the Pedal Assist Level (PAS), or navigates up in menu settings.
- "-" Button: Decreases the Pedal Assist Level (PAS), or navigates down in menu settings.
- Botó Mode/Configuració: May be used to enter settings menus, confirm selections, or toggle specific functions like headlights.
Refer to your eBike's main user manual for specific button combinations and advanced settings if available.
4.3 Adjusting Settings (Example)
To change units (MPH/KM/H) or backlight brightness:
- With the display on, press and hold the "Mode" or "Power" button (depending on model) for a few seconds to enter the settings menu.
- Use the "+" and "-" buttons to navigate through the menu options (e.g., "Units", "Brightness").
- Press the "Mode" or "Power" button again to select an option.
- Use "+" and "-" to adjust the value.
- Press "Mode" or "Power" to confirm and exit the setting, or hold to exit the menu.
5. Manteniment
Proper maintenance will extend the life of your LCD Display Assembly.
- Neteja: Utilitzeu un suau, damp cloth to gently wipe the display screen. Do not use harsh chemicals, abrasive cleaners, or excessive water.
- Inspecció: Periodically check the display's mounting and wiring connections to ensure they are secure and free from damage.
- Emmagatzematge: When storing your eBike for extended periods, especially in extreme temperatures, consider covering the display or storing the eBike in a climate-controlled environment.
- Exposició a l'aigua: While the display is designed to be weather-resistant, avoid submerging it in water or exposing it to high-pressure water jets.
6. Solució De Problemes
If you encounter issues with your LCD Display Assembly, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla no s'encén. | eBike not powered on; loose connection; dead battery. | Ensure eBike is powered on. Check all wiring connections. Charge eBike battery. |
| Incorrect speed or distance readings. | Incorrect wheel size setting; loose speed sensor. | Check eBike's main manual for how to adjust wheel size settings on the display. Ensure speed sensor is correctly positioned and secure. |
| Els botons no responen. | Error temporal de programari; danys físics. | Try powering off and restarting the eBike. Inspect buttons for physical damage or debris. |
| La pantalla mostra un codi d'error. | Specific eBike system issue. | Refer to your Swagtron eBike's main user manual for a list of error codes and their meanings. |
If the problem persists after attempting these solutions, please contact Swagtron customer support.
7. Especificacions
- Nom del model: 2013HE
- Marca: Swagtron
- Compatibilitat: Swagtron EB7, Swagtron EB-7 Plus eBikes
- Material: Plàstic
- Color: Negre
- Components inclosos: Conjunt de pantalla LCD
- Garantia: 30-Day Manufacturer Hardware Limited Warranty
- ASIN: B0DT3Z7BB3
8. Garantia i assistència
8.1 Garantia limitada
This Swagtron LCD Display Assembly is covered by a 30-Day Manufacturer Hardware Limited Warranty des de la data de compra. Aquesta garantia cobreix els defectes de materials i fabricació en condicions d'ús normal. No cobreix els danys causats per un mal ús, accidents, modificacions no autoritzades o instal·lació incorrecta.
Conserveu el vostre comprovant de compra per a reclamacions de garantia.
8.2 Atenció al client
For technical assistance, warranty claims, or further inquiries, please contact Swagtron customer support. Visit the official Swagtron weblloc web per obtenir la informació de contacte més actualitzada.
Recursos en línia: www.swagtron.com