Introducció
Thank you for choosing PowerLocus Jumpy Wireless Bluetooth Earbuds. These earbuds are designed specifically for children, offering a safe and comfortable audio experience with an 85dB volume limit, durable construction, and easy-to-use features. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Jumpy earbuds to ensure optimal performance and safety.
Característiques del producte
- Límit de volum segur: 85dB maximum volume, recommended by the WHO, to protect children's hearing.
- Cancel·lació avançada del soroll: Equipped with 4 noise-cancelling microphones and AI ENC Noise Cancelling Technology for clear calls.
- Connectivitat Bluetooth 5.3: Garanteix una connexió sense fil estable i eficient.
- Temps de joc llarg: Over 30 hours of total playtime with the charging case (6 hours per charge).
- Ajust còmode i segur: Flexible silicone ear hooks that rotate up to 90 degrees, and soft S/M silicone eartips for a comfortable, open-ear design.
- Materials duradors i segurs: Shockproof, rain-resistant, BPA-free, hypoallergenic, and made from safe certified materials.
- Controls tàctils intuïtius: Easy management of music, calls, and gaming mode.
- Mode de joc de baixa latència: Optimized for video games and entertainment.
- Àudio immersiu: Features 12x17mm audio drivers for a rich sound experience.
- Compatibilitat universal: Works with tablets, cell phones, and other Bluetooth-enabled devices.
Configuració
1. Càrrega dels auriculars i l'estoig
Abans del primer ús, carregueu completament els auriculars i l'estoig de càrrega.
- Place the Jumpy earbuds into their charging case. Ensure they are correctly seated.
- Connecteu la funda de càrrega a una font d'alimentació mitjançant el cable USB-C proporcionat.
- The LED indicator on the case will show charging status. A full charge typically takes approximately 1.5-2 hours for the earbuds and 2-3 hours for the case.
- Once fully charged, the indicator light will change or turn off, depending on the model.
Image: PowerLocus Jumpy Earbuds in their charging case, highlighting the 30+ hours of total playtime. The case provides multiple recharges for extended use.
2. Emparellament Bluetooth
Pair your Jumpy earbuds with your device for wireless audio.
- Obre l'estoig de càrrega. Els auriculars entraran automàticament en mode d'emparellament, cosa que s'indicarà amb un llum LED intermitent en un o tots dos auriculars.
- Al dispositiu (telèfon intel·ligent, tauleta, etc.), aneu a la configuració de Bluetooth.
- Cerca available devices and select "PowerLocus Jumpy" from the list.
- Once connected, the LED indicator on the earbuds will stop flashing, and your device will confirm the connection.
- Per a usos posteriors, els auriculars es connectaran automàticament a l'últim dispositiu emparellat quan es treguin de l'estoig.
Image: The PowerLocus Jumpy Earbuds in their charging case, illustrating key features like Bluetooth 5.3 connectivity and touch sensor controls.
Instruccions de funcionament
Controls tàctils
The Jumpy earbuds feature intuitive touch controls on each earbud.
- Reproduir/pausa: Un sol toc a qualsevol dels auriculars.
- Pista següent: Toqueu dues vegades l'auricular dret.
- Pista anterior: Toqueu dues vegades l'auricular esquerre.
- Respondre/Finalitzar la trucada: Un sol toc a qualsevol dels auriculars.
- Rebutja la trucada: Manteniu premut qualsevol dels auriculars durant 2 segons.
- Activa l'Assistent de veu: Toqueu tres vegades qualsevol dels auriculars.
- Activa/desactiva el mode de joc: Press and hold the right earbud for 2 seconds to activate/deactivate low latency gaming mode.
Gestió de volums
The Jumpy earbuds are designed with an 85dB safe volume limit to protect children's hearing. Volume adjustments should be made directly on the connected device.
Fer i rebre trucades
Utilize the built-in microphones for clear communication.
- Assegureu-vos que els auriculars estiguin connectats al telèfon.
- Use the touch controls as described above to manage calls.
Image: A child using PowerLocus Jumpy earbuds during an online learning session, demonstrating their suitability for educational and gaming purposes with noise-cancelling microphones and low-latency gaming mode.
Manteniment
Neteja
Una neteja regular ajuda a mantenir el rendiment i la higiene.
- Netegeu suaument els auriculars i l'estoig de càrrega amb un drap suau, sec i sense borrissol.
- For silicone eartips, remove them and clean with a mild soap solution, then rinse and dry thoroughly before reattaching.
- No utilitzeu netejadors abrasius, alcohol ni dissolvents químics.
Emmagatzematge
Quan no els utilitzeu, guardeu els auriculars a la seva funda de càrrega per protegir-los i mantenir-los carregats.
- Emmagatzemar en un lloc fresc i sec, lluny de la llum solar directa i de temperatures extremes.
- Avoid exposing the earbuds or case to water or excessive moisture, despite their rain-resistant design.
Image: The PowerLocus Jumpy Earbuds showcasing their durable and child-safe construction, including hypoallergenic, shockproof, rain-resistant, BPA-free, and safe certified materials.
Resolució de problemes
| Problema | Possible solució |
|---|---|
| Els auriculars no s'aparellen | Ensure earbuds are charged. Turn off and on Bluetooth on your device. Forget "PowerLocus Jumpy" in your device's Bluetooth settings and re-pair. |
| Sense so | Comprova el volum del dispositiu. Assegura't que els auriculars estiguin connectats. Prova de reproduir àudio diferent. |
| Un auricular no funciona | Place both earbuds back in the case, close it, then open again. Ensure both are charged. Re-pair if necessary. |
| Poca qualitat de trucada | Ensure microphones are not obstructed. Move closer to your connected device. Check network signal. |
| Auriculars que cauen | Adjust the flexible silicone ear hooks for a snug fit. Try different sized silicone eartips (S or M) for better comfort and stability. |
Especificacions
- Nom del model: Jumpy
- Marca: PowerLocus
- Tecnologia de connectivitat: Sense fil (Bluetooth 5.3)
- Col·locació de les orelles: Open-ear hook design with in-ear tips
- Controladors d'àudio: 12x17mm
- Impedància: 32 ohms
- Sensibilitat: 85 dB (Safe Volume Limit)
- Aïllament acústic: Aïllament acústic
- Micròfons: 4 Noise Cancelling Microphones with AI ENC Technology
- Mètode de control: Toca
- Durada de la bateria: 6 hours (earbuds), 30+ hours total with charging case
- Material: Silicona
- Nivell de resistència a l'aigua: Rain-resistant
- Característiques especials: Noise Cancellation, Rechargeable Battery, Touch Control, Multipoint Pairing, Low Latency Gaming Mode, BPA-Free, Hypoallergenic.
- Dispositius compatibles: Tablet, Cell Phone
- Components inclosos: 1 pair of Jumpy wireless earbuds, charging case, USB-C cable, S/M silicone eartips.
Imatge: Una imatge detallada view of the PowerLocus Jumpy earbud, highlighting its 12x17mm audio drivers designed for an immersive audio experience.
Informació de seguretat
The PowerLocus Jumpy earbuds are designed with your child's safety in mind.
- Límit de volum: The earbuds feature an 85dB safe volume limit, adhering to recommendations from the World Health Organization (WHO) to prevent hearing damage in children.
- Seguretat del material: Constructed from BPA-free, hypoallergenic, and safe certified materials.
- Perill d'asfixia: Keep small parts, such as eartips, out of reach of very young children.
- Supervisió: Adult supervision is recommended for young children using electronic devices.
- Seguretat ambiental: Do not expose to extreme temperatures, fire, or immerse in water.
Image: A child wearing PowerLocus Jumpy earbuds, illustrating the product's commitment to hearing safety with an 85dB safe volume limit, as recommended by the WHO.
Garantia i Suport
PowerLocus stands behind the quality of its products.
- Garantia: Your PowerLocus Jumpy earbuds come with a 2-year extended coverage service. Please retain your proof of purchase for warranty claims.
- Atenció al client: For any questions, technical assistance, or warranty inquiries, please contact PowerLocus customer support through the retailer's platform or the official PowerLocus weblloc.
