FUXTEC FX-EV360

Manual d'usuari de l'airejador i escarificador elèctric FUXTEC FX-EV360

Model: FX-EV360

1. Introducció

This manual provides essential instructions for the safe and effective operation, assembly, and maintenance of your FUXTEC FX-EV360 Electric Aerator and Scarifier. Please read this manual thoroughly before using the appliance to ensure proper function and to prevent injury or damage. Keep this manual in a safe place for future reference.

The FUXTEC FX-EV360 is designed to improve the health and appearance of your lawn by removing moss, thatch, and dry debris. It features a powerful 1500W motor, a 36 cm working width, and 5 adjustable depth levels for versatile lawn care.

2. Instruccions de seguretat

Advertències generals de seguretat:

Seguretat elèctrica:

3. Producte acabatview

The FUXTEC FX-EV360 is an electric aerator and scarifier designed for efficient lawn maintenance.

FUXTEC FX-EV360 Electric Aerator and Scarifier, front view

Figura 1: Frontal view of the FUXTEC FX-EV360 Electric Aerator and Scarifier.

FUXTEC FX-EV360 Electric Aerator and Scarifier, angled view

Figura 2: Angle view of the FUXTEC FX-EV360, highlighting the handle and collection bag.

Part inferior view of FUXTEC FX-EV360 showing the roller mechanism

Figura 3: Part inferior view showing the roller mechanism and depth adjustment lever.

Close-up of the aerator/scarifier roller with tines

Figure 4: Close-up of the interchangeable roller with tines for scarifying or aerating.

Components clau:

4. Muntatge i muntatge

The FUXTEC FX-EV360 is designed for straightforward assembly. Follow these steps:

  1. Desembalatge: Traieu amb cura tots els components de l'embalatge. Comproveu si hi ha algun dany o si falten peces.
  2. Muntatge del manillar: Attach the lower handlebar sections to the main unit. Secure them using the provided screws or quick-release clamps. Then, attach the upper handlebar section, ensuring the operating switch and cable are correctly positioned and secured.
  3. Instal·lació de rodets: The unit typically comes with one roller pre-installed. If you need to change the roller (e.g., from scarifier to aerator), refer to the "Roller Replacement" section in Maintenance. Ensure the chosen roller is securely fastened before operation.
  4. Adjunt a la bossa de recollida: Hook the 45-liter collection bag onto the designated points at the rear of the machine. Ensure it is securely attached to prevent debris from escaping.
  5. Gestió de cables: Secure the power cable along the handlebar using the provided clips to prevent it from interfering with operation or getting damaged.

Note: While assembly is generally intuitive, always refer to the detailed diagrams in the printed manual for precise steps.

5. Instruccions de funcionament

Before starting, ensure all safety instructions have been read and understood.

  1. Preparació:
    • Clear the lawn of any obstacles like stones, toys, or branches.
    • Mow the lawn to a short height (e.g., 2-3 cm) before scarifying or aerating for best results.
    • Ensure the lawn is dry. Operating on wet grass can clog the machine and reduce effectiveness.
  2. Selecting Working Depth:
    • The FUXTEC FX-EV360 offers 5 adjustable depth levels, ranging from -12 mm to +10 mm.
    • Use the depth adjustment lever, typically located on the side of the machine, to select the desired depth.
    • For initial scarifying, start with a shallower depth and gradually increase if needed. For aeration, a deeper setting might be appropriate.
    • The '+' settings are for raking (light dethatching), while the '-' settings are for scarifying (deeper cutting).
  3. Inici de la màquina:
    • Connect the machine to a suitable power outlet.
    • Press and hold the safety button (if present) and then squeeze the operating lever on the handlebar to start the motor.
    • The motor will start immediately.
  4. Funcionament:
    • Push the machine forward at a steady, moderate pace. Avoid pushing too fast, which can reduce effectiveness, or too slow, which can overload the motor.
    • Superposa lleugerament cada passada per assegurar una cobertura completa de la gespa.
    • Empty the 45-liter collection bag regularly to maintain optimal performance and prevent clogging.
    • When turning, release the operating lever to stop the motor, lift the front of the machine slightly, pivot, and then restart.
  5. Aturar la màquina:
    • Release the operating lever to stop the motor.
    • Wait for the roller to come to a complete stop before moving away from the machine or performing any tasks.
    • Always disconnect the power cord after use.

6. Manteniment i emmagatzematge

Regular maintenance ensures the longevity and optimal performance of your FUXTEC FX-EV360.

  1. Neteja:
    • After each use, disconnect the power supply.
    • Clean the machine thoroughly, especially the roller and the underside of the housing, to remove grass, soil, and debris. Use a brush or a damp cloth. Do not use water jets or high-pressure cleaners.
    • Assegureu-vos que les obertures de ventilació estiguin lliures de residus.
    • Clean the collection bag as needed.
  2. Substitució del rodet:
    • Desconnecteu la font d'alimentació.
    • Carefully tilt the machine to access the underside.
    • Locate the roller retention mechanism (e.g., bolts, clips).
    • Remove the current roller and install the desired roller (scarifier or aerator), ensuring it is correctly seated and secured.
    • Always ensure the roller is firmly attached before resuming operation.
  3. Emmagatzematge:
    • Netegeu bé la màquina abans de guardar-la.
    • Guardeu la màquina en un lloc sec i ben ventilat, allunyat de la llum solar directa i de temperatures extremes.
    • The handlebar can be folded using the quick-release clamps for compact storage.
    • Mantenir fora de l'abast dels nens.
  4. Inspecció:
    • Regularly inspect the rollers for wear or damage. Replace worn or damaged rollers immediately.
    • Comproveu que tots els cargols i elements de fixació estiguin ben ajustats.
    • Inspect the power cord for any cuts, abrasions, or signs of damage.

7. Solució De Problemes

This section addresses common issues you might encounter. For problems not listed here, contact FUXTEC customer support.

ProblemaCausa possibleSolució
La màquina no arrenca.
  • Sense font d'alimentació.
  • Interruptor de seguretat no activat.
  • El cable d'alimentació està danyat.
  • Comproveu la connexió d'alimentació i l'interruptor.
  • Ensure safety button is pressed before squeezing the operating lever.
  • Inspect cord; replace if damaged by a qualified technician.
Poor scarifying/aerating performance.
  • Incorrect depth setting.
  • Rollers are worn or clogged.
  • La bossa de recollida està plena.
  • La gespa està massa humida.
  • Adjust to a deeper setting.
  • Clean or replace rollers.
  • Buideu la bossa de recollida.
  • Wait for the lawn to dry before operating.
Vibracions o sorolls excessius.
  • Roller unbalanced or damaged.
  • Components solts.
  • Debris caught in the roller.
  • Inspect and clean the roller; replace if damaged.
  • Check all fasteners and tighten as necessary.
  • Disconnect power and remove any caught debris.
Collection bag not filling effectively.
  • Bag not properly attached.
  • Canal de descàrrega obstruït.
  • Depth setting too shallow.
  • Ensure bag is securely attached.
  • Clear any blockages in the discharge chute (after disconnecting power).
  • Adjust to a deeper setting.

8. Especificacions tècniques

CaracterísticaEspecificació
ModelFUXTEC FX-EV360
Potència del motor1500 W
Amplada de treball36 cm
Ajust de profunditat5 levels (-12 mm to +10 mm)
Capacitat de la bossa de recollida45 litres
Velocitat del motor3600 rpm
Pes net13 kg
Dimensions (paquet)61.5 x 53.5 x 28.5 cm
FabricantFUXTEC
País d'origenXina

9. Garantia i Suport

FUXTEC products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official FUXTEC weblloc.

For technical assistance, spare parts, or service inquiries, please contact FUXTEC customer support.

Documents relacionats - FX-EV360

Preview FUXTEC FX-BV240ECO Vertikutierer Bedienungsanleitung
Umfassende Bedienungsanleitung für den FUXTEC FX-BV240ECO Vertikutierer, die den bestimmungsgemäßen Gebrauch, Sicherheitshinweise, Montage, Bedienung, Wartung und Fehlerbehebung abdeckt. In mehreren Sprachen verfügbar.
Preview FUXTEC FX-LS52 Laubkehrmaschine Bedienungsanleitung
Umfassende Bedienungsanleitung für die FUXTEC FX-LS52 Laubkehrmaschine. Erfahren Sie mehr über Montage, sichere Anwendung, Wartung und technische Daten für Ihren Außenbereich.
Preview FUXTEC FX-RMT84M | FX-RMT92A Rasentraktor Bedienungsanleitung
Die offizielle Bedienungsanleitung for FUXTEC Rasentraktoren FX-RMT84M i FX-RMT92A. Finden Sie detaillierte Informationen zu Sicherheit, Montage, Bedienung, Wartung und Fehlerbehebung für Ihren FUXTEC Rasentraktor.
Preview Manual d'usuari de la tallagespa FUXTEC FX-RMT84M | FX-RMT92A
Aquest manual d'usuari proporciona instruccions de funcionament detallades, normes de seguretat, pautes de manteniment i especificacions tècniques per a les tallagespes amb conductor FUXTEC FX-RMT84M i FX-RMT92A.
Preview FUXTEC FX-CT Sèrie Bollerwagen Bedienungsanleitung
Umfassende Bedienungsanleitung für die FUXTEC FX-CT Serie Bollerwagen, die Sicherheitshinweise, Montage, Produktinformationen, Wartung und Garantie abdeckt. In mehreren Sprachen verfügbar.
Preview FUXTEC FX-E1RMEH20 Akku-Rasenmäher Bedienungsanleitung
Diese Bedienungsanleitung für den FUXTEC FX-E1RMEH20 Akku-Rasenmäher enthält wichtige Informationen zu Sicherheit, Montage, Bedienung, Wartung und technischen Daten für einen sicheren und effizienten Einsatz.