Kienzle Model 14987 Digital Radio-Controlled Alarm Clock

Introducció

Thank you for choosing the Kienzle Model 14987 Digital Radio-Controlled Alarm Clock. This device combines precise timekeeping with practical features such as two adjustable alarms, a snooze function, and an indoor temperature display. Its radio-controlled (DCF) functionality ensures accurate time synchronization. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your alarm clock.

Figura 1: Kienzle Model 14987 Digital Radio-Controlled Alarm Clock in a living room setting.

Configuració

1. Instal·lació de la bateria

The alarm clock operates on two AAA/LR03 batteries (not included). Follow these steps to install them:

1. Localitzeu la tapa del compartiment de la bateria a la part posterior de la unitat.
2. Feu lliscar la tapa cap avall per obrir el compartiment.
3. Insert two AAA/LR03 batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. Torneu a col·locar la tapa del compartiment de la bateria fent-la lliscar fins que faci clic de manera segura.

Figura 2: Compartiment per a piles amb dues ranures per a piles AAA.

2. Engegada inicial i recepció del senyal DCF

Upon battery installation, the clock will automatically power on and begin searching for the DCF radio signal. This process may take several minutes. During this time, a signal icon will typically flash on the display.

• Place the clock near a window for better signal reception, away from electronic devices that may cause interference.
• Once the signal is successfully received, the time will be automatically set, and the signal icon will appear steadily on the display.
• If the signal is not received within 10 minutes, the clock will proceed with default settings. You may need to manually set the time or try relocating the clock.

Figura 3: Front display of the alarm clock showing time and other information.

Instruccions de funcionament

The Kienzle Model 14987 features four touch buttons for easy operation. These buttons are typically located on the front panel below the display.

Figura 4: Close-up of the alarm clock display and touch buttons.

1. Funcions del botó

• Leftmost Button (e.g., "/⚙️"): Typically used for settings mode or switching display information.
• Second Button (e.g., "⏰"): Used for alarm settings.
• Third Button (e.g., "+/📶"): Used to increase values during settings or manually initiate DCF signal search.
• Rightmost Button (e.g., "-"): Used to decrease values during settings.

2. Setting the Time (Manual)

While the DCF signal automatically sets the time, you can manually adjust it if needed or if the signal is unavailable.

1. Manteniu premut el botó Leftmost Button (Settings/Mode) for a few seconds until the time display starts flashing.
2. Utilitza el "+" i "-" botons per ajustar l'hora.
3. Premeu el botó Leftmost Button de nou per passar a minuts i després ajusteu amb "+" i "-".
4. Continueu pressionant el botó Leftmost Button to cycle through other settings like 12/24-hour format, year, month, and day.
5. Premeu el botó Leftmost Button one last time or wait a few seconds for the settings to save and exit.

3. Configuració d'alarmes

The clock features two independent alarms: one for weekdays (Monday-Friday) and one for weekends (Saturday-Sunday).

1. Premeu el botó Alarm Button (⏰) una vegada a view Alarm 1 (AL1) time.
2. Manteniu premut el botó Alarm Button (⏰) for a few seconds until the AL1 time starts flashing.
3. Utilitza el "+" i "-" buttons to set the desired hour for Alarm 1.
4. Premeu el botó Alarm Button (⏰) de nou per passar a minuts i després ajusteu amb "+" i "-".
5. Premeu el botó Alarm Button (⏰) once more to confirm and activate Alarm 1. An alarm icon will appear on the display.
6. Repeat the process for Alarm 2 (AL2) by pressing the Alarm Button (⏰) dues vegades a view AL2, then press and hold to set.

Per activar/desactivar una alarma, premeu la tecla Alarm Button (⏰) repeatedly until the desired alarm (AL1 or AL2) is shown, then press the "+" button to toggle it on or off. An active alarm will show its respective icon (e.g., AL1, AL2) on the display.

4. Funció de posposició

When an alarm sounds, touch the top bar of the clock or the designated snooze area (if applicable) to activate the snooze function. The alarm will temporarily stop and sound again after approximately 5-10 minutes (duration may vary). To fully turn off the alarm, press any other button on the front panel.

5. Visualització de la temperatura

The clock continuously measures and displays the indoor temperature. You can switch between Celsius (°C) and Fahrenheit (°F) by pressing the Leftmost Button (Settings/Mode) briefly when not in setting mode, or as indicated in the display cycle.

6. Llum de fons

The display features a backlight for improved visibility in low light conditions. To activate the backlight, briefly touch the top bar of the clock or the designated backlight/snooze area. The backlight will illuminate for a few seconds and then turn off automatically to conserve battery life.

Figura 5: Alarm clock display with activated backlight.

Manteniment

1. Neteja

To clean the alarm clock, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the display or casing. Avoid getting moisture into the unit.

2. Substitució de la bateria

When the display becomes dim or the clock functions erratically, it is time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section. Always replace both batteries at the same time with new AAA/LR03 batteries. Dispose of old batteries responsibly according to local regulations.

Resolució de problemes

Especificacions

• Marca: Kienzle
• Model: 14987
• Color: Plata/Negre
• Dimensions: 6.6 x 3.81 x 2.2 cm (2.6 x 1.5 x 0.9 polzades)
• Pes: 65 grams (2.3 unces)
• Material: Plàstic
• Tipus de visualització: Digital
• Font d'alimentació: 2 piles AAA/LR03 (no incloses)
• Característiques especials: DCF Radio-Controlled Time, 2 Alarms (Mon-Fri, Sat-Sun), Snooze Function, Indoor Temperature Display (°C/°F), Backlight, Touch Buttons, 12/24-hour format, Date and Day of Week display.

Garantia i Suport

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Kienzle products are designed for reliability and precision. Should you encounter any issues not covered in this manual, please reach out to the authorized service center or your point of purchase for assistance.