Maxxima MSL-905005

Maxxima 9-inch Hardwired LED Under Cabinet Light (Model MSL-905005)

Manual d'instruccions

Introducció

Thank you for choosing the Maxxima 9-inch Hardwired LED Under Cabinet Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Informació important de seguretat

WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the fuse or circuit breaker before installing or servicing. All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.

Contingut del paquet

Característiques del producte

The Maxxima 9-inch LED Under Cabinet Light offers versatile illumination with advanced features:

Close-up of the Maxxima under cabinet light showing the On/Off rocker switch and the 5 CCT slide switch.

Imatge: Primer pla view of the fixture's On/Off switch and the 5 CCT color temperature selection switch.

Graphic illustrating the five selectable color temperatures: 2700K, 3000K, 3500K, 4000K, and 5000K.

Image: Visual representation of the five color temperature options available on the fixture.

Instruccions d'instal·lació

1. Preparació

  1. Apagueu l'alimentació: Locate the circuit breaker or fuse box and turn off the power to the area where you will be installing the light fixture. Verify power is off using a voltage provador.
  2. Reuneix les eines: You will need a screwdriver, wire strippers, a drill, and possibly a pencil for marking.

2. Muntatge del dispositiu

  1. Position the fixture under the cabinet in the desired location. Mark the two mounting screw locations (4" apart) on the mounting surface.
  2. Perforeu forats pilot si cal.
  3. Secure the fixture to the mounting surface using the provided screws. Ensure the fixture is firmly attached.
Part inferior view of the Maxxima under cabinet light showing the mounting holes and screw locations.

Image: Underside of the fixture, highlighting the mounting points for installation.

3. Connexions de cablejat

  1. Open the wiring compartment cover on the fixture.
  2. Carefully strip approximately 3/8 inch of insulation from the ends of the house supply wires (black, white, and ground).
  3. Connecteu el cable negre del dispositiu al cable negre (calent) de la casa amb una femella.
  4. Connecteu el cable blanc de l'aparell al cable blanc (neutre) de la casa amb una femella.
  5. Connect the fixture's green (ground) wire to the house's bare copper or green (ground) wire using a wire nut.
  6. Ensure all wire nuts are securely tightened and no bare wire is exposed.
  7. Carefully tuck all wires into the wiring compartment and close the cover.
Image showing the wiring compartment of the Maxxima under cabinet light, both closed and open with wires visible.

Image: The wiring compartment of the fixture, illustrating how wires are connected and secured.

4. Passos finals

  1. Once wiring is complete and the compartment cover is closed, restore power at the circuit breaker or fuse box.
  2. Test the light fixture using the On/Off switch.

Instruccions de funcionament

1. Encendre/apagar

Use the rocker switch located on the front of the fixture to turn the light ON or OFF. If the fixture is connected to a wall switch or timer, you can leave the rocker switch in the ON position and control the light from the external switch.

2. Selecció de la temperatura de color (CCT)

The fixture features a slide switch for selecting one of five color temperatures. To change the CCT, simply slide the switch to your desired setting:

Maxxima under cabinet light emitting a warm white light, installed under a kitchen cabinet.

Image: The under cabinet light illuminated with a warm white color temperature (e.g., 2700K or 3000K).

Maxxima under cabinet light emitting a neutral white light, installed under a kitchen cabinet.

Image: The under cabinet light illuminated with a neutral white color temperature (e.g., 4000K or 5000K).

Manteniment

To maintain the appearance and performance of your Maxxima LED Under Cabinet Light:

Resolució de problemes

ProblemaCausa possibleSolució
La llum no s’encén.No hi ha energia a l’aparell.Check circuit breaker/fuse. Ensure wall switch (if any) is ON. Verify all wiring connections are secure.
La llum parpelleja o és tènue.Connexió de cablejat solta.Disconnect power and re-check all wiring connections.
Temperatura de color incorrecta.CCT slide switch set incorrectly.Adjust the CCT slide switch to the desired setting.

Especificacions

AtributValor
Número de modelMSL-905005
Mida9 polzades
Wattage4.5 watts
Brillantor270 lúmens
Temperatura de color (CCT)2700K, 3000K, 3500K, 4000K, 5000K seleccionables
Voltage120 volts (CA)
Dimensions del producte9 cm de llargada x 3.58 cm d'amplada x 1.45 cm d'alçada
Pes de l'article1 lliures
MaterialPlàstic
Tipus de font de llumLED
Tota la vida50,000 hores
CertificacionsLlistat per ETL
Garantia3 Anys

Garantia i Suport

This Maxxima LED Under Cabinet Light is covered by a 3 any de garantia des de la data de compra. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.

For technical support, warranty claims, or further assistance, please contact Maxxima customer service. Refer to the product packaging or the official Maxxima weblloc web per obtenir informació de contacte actualitzada.