Manual d'usuari de l'inversor solar híbrid Anern de 3600 W

1. Introducció

This manual provides essential information for the safe and efficient operation of your Anern 3600W Hybrid Solar Inverter. This all-in-one unit integrates a 3600W pure sine wave inverter, a 120A MPPT solar charge controller, and a battery charger. It is designed to convert 24V DC power to 110V/120V AC power, suitable for various home backup, RV, and off-grid applications. Please read this manual thoroughly before installation and use.

Figure 1: Anern 3600W Hybrid Solar Inverter (Model Anern-3600)

2. Informació de seguretat

Observe the following safety precautions to prevent injury and damage to the inverter or connected equipment:

• La instal·lació ha de ser realitzada per personal qualificat.
• Assegureu-vos que tot el cablejat compleixi amb els codis elèctrics locals i nacionals.
• No desmunteu l'inversor. No hi ha peces a l'interior que l'usuari pugui reparar.
• Disconnect all power sources (PV, battery, AC input) before performing any wiring or maintenance.
• Eviteu el contacte amb terminals actius.
• Instal·leu l'inversor en una zona ben ventilada, allunyada de materials inflamables i humitat.
• Assegureu-vos de posar a terra correctament l'inversor.
• This inverter is equipped with multiple protection features including overcurrent, low-voltage, short-circuit, overheating, and overload protection.

Figure 2: Inverter Protection Features and Wi-Fi Monitoring Capability

3. Característiques del producte

The Anern 3600W Hybrid Solar Inverter offers a range of features for reliable power management:

• Sistema integrat: Combines a 3600W pure sine wave inverter, 120A MPPT solar charge controller, and battery charger.
• Alta eficiència: Solar charge module utilizes optimized MPPT tracking technology for up to 98% efficiency.
• Compatibilitat de la bateria: Supports 24V Lead-Acid (Sealed, AGM, Gel, Flooded) and Lithium batteries. Includes built-in lithium activation.
• Funcionament sense bateries: Capable of powering loads directly from the PV array without a connected battery.
• Dual AC Output: Provides two AC outputs for flexible load management.
• Pantalla LCD: Features a responsive RGB LCD screen and indicator LEDs for real-time monitoring and configuration.
• Múltiples modes de funcionament: Offers 4 charging modes and 2 output modes to suit diverse application needs.
• Protecció integral: Includes protection against overvoltage, minvartage, reverse polarity, short circuits, overheating, and overload.
• Monitorització remota: Supports Wi-Fi monitoring for system control via a mobile application.

Figure 3: Key Specifications and Features Overview

Figure 4: Battery Compatibility and Battery-Free Operation

4. Contingut del paquet

Verifiqueu que tots els elements estiguin inclosos al vostre paquet:

• Anern 3600W Hybrid Solar Inverter (Model Anern-3600)
• Manual d'usuari (aquest document)
• Mounting accessories (if applicable, check packaging)
• Communication cable (if applicable, for Wi-Fi module)

5. Instruccions de configuració

5.1. Desembalatge i inspecció

Carefully unpack the inverter and inspect it for any shipping damage. If any damage is found, contact your supplier immediately.

5.2. Muntatge de l'inversor

Select a suitable location for mounting the inverter. It should be:

• Indoors, protected from direct sunlight, rain, and dust.
• Well-ventilated to ensure adequate heat dissipation.
• Mounted vertically on a solid surface.
• Accessible per cablejat i manteniment.

Use appropriate mounting hardware (not always included) to secure the inverter to the wall.

5.3. Connexions de cablejat

All wiring must be performed with all power sources disconnected. Refer to the wiring diagram (usually found on the inverter or in a detailed wiring section of the full manual) for specific terminal connections.

1. Connexió de la bateria: Connect the 24V battery bank to the inverter's battery terminals. Ensure correct polarity (+ to + and - to -). Use appropriately sized cables and fuses.
2. Connexió del panell fotovoltaic: Connect the solar panel array to the PV input terminals. Observe correct polarity and ensure the PV input voltage and current are within the inverter's specifications (Max PV Power 4200W, Max DC Voltagi 500VDC).
3. AC Input Connection (Grid/Generator): If connecting to a utility grid or generator, connect the AC input to the designated terminals.
4. Connexió de sortida de CA (càrregues): Connect your AC loads (appliances) to the inverter's AC output terminals. The inverter features dual AC outputs.
5. Posada a terra: Connect the inverter's ground terminal to a reliable earth ground.

5.4. Engegada i configuració inicials

After all connections are secure and verified:

1. Turn on the battery breaker/switch.
2. Turn on the PV array breaker/switch.
3. If applicable, turn on the AC input breaker.
4. The inverter will power on and the LCD display will illuminate.
5. Use the control buttons on the LCD panel to configure system settings such as charging current, voltage thresholds, and priority modes according to your requirements.

Figure 5: Dual AC Output and RGB LCD Display for Configuration

6. Modes de funcionament

The inverter supports various charging and output modes to optimize power usage.

6.1. Modes de càrrega

You can select one of four charging modes:

• Només solar: The inverter charges the battery exclusively from solar energy.
• Mains Supply Priority: The inverter prioritizes charging from the utility grid (mains supply). Solar energy will supplement if available.
• Prioritat solar: The inverter prioritizes charging from solar energy. The utility grid will be used if solar power is insufficient.
• Mains Supply and Solar Charging Combination: The inverter uses both mains supply and solar energy to charge the battery simultaneously.

6.2. Output Modes

The inverter offers two output modes for continuous power supply:

• Power Bypass: In this mode, loads are powered directly from the AC input (utility grid or generator), bypassing the inverter. The inverter acts as a charger.
• Sortida del inversor: Loads are powered by the inverter, drawing energy from the battery or directly from the PV array (if in battery-free mode).

Figure 6: Charging and Output Mode Diagram

7. Manteniment

Regular maintenance ensures optimal performance and longevity of your inverter:

• Neteja: Periodically clean the inverter's exterior and ventilation openings to prevent dust buildup, which can hinder cooling. Use a dry, soft cloth.
• Comprovació de la connexió: Annually inspect all electrical connections for tightness and corrosion. Loose connections can cause overheating and poor performance.
• Control ambiental: Assegureu-vos que l'entorn d'instal·lació es mantingui dins dels rangs de temperatura i humitat especificats.
• Inspecció de la bateria: Si feu servir bateries de plom-àcid, comproveu els nivells d'electròlits i l'estat dels terminals segons les instruccions del fabricant de la bateria.
• Actualitzacions de firmware: Comproveu el del fabricant weblloc web per a qualsevol actualització de firmware disponible per a un millor rendiment o noves funcions.

8. Solució De Problemes

This section provides solutions to common issues. For problems not listed here, contact technical support.

9. Especificacions

Detailed technical specifications for the Anern 3600W Hybrid Solar Inverter:

10. Garantia i Suport

For warranty information, please refer to the documentation provided with your purchase or contact Anern customer service. If you encounter any issues or require technical assistance, please reach out to Anern support through their official weblloc web o canals de contacte.