Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your TREBLEET USB4 v2.0 M.2 NVMe SSD Enclosure, Model TRE-8132. This enclosure is designed for high-speed data transfer, supporting up to 80Gbps, and is compatible with Thunderbolt 5, Thunderbolt 4, and USB4 interfaces. Please read this manual thoroughly before use to ensure proper functionality and longevity of the device.
Contingut del paquet
Verifiqueu que tots els elements que s'enumeren a continuació siguin presents al vostre paquet:
- TREBLEET USB4 v2.0 M.2 NVMe SSD Enclosure (Model TRE-8132)
- 80Gbps USB-C to USB-C Cable
- Eina de tornavís
Configuració
Follow these steps to install an M.2 NVMe SSD into the enclosure:
- Using the provided screwdriver, carefully open the enclosure.
- Locate the NVMe 2280 Socket inside the enclosure.
- Insert your M.2 NVMe SSD into the socket at a slight angle, ensuring the notch on the SSD aligns with the key in the socket.
- Gently press down the SSD and secure it with the provided screw or retention clip.
- Close the enclosure cover and secure it with the screws.
Figura 1: Explotat view of the TREBLEET SSD enclosure, illustrating the NVMe 2280 socket, turbo cooling fan, TB5 data transmission interface, and auxiliary power supply interface.
Instruccions de funcionament
To use your TREBLEET SSD enclosure:
- Connect one end of the provided 80Gbps USB-C cable to the TB5 Data Transmission Interface (80Gbps) on the enclosure.
- Connect the other end of the cable to a compatible port on your computer (Thunderbolt 5, Thunderbolt 4, Thunderbolt 3, or USB4).
- For high-capacity NVMe drives (8TB or larger) or when experiencing insufficient power issues, connect a power adapter (not included) to the Auxiliary Power Supply Interface (PD Power Port) on the enclosure. This ensures stable data transmission.
- For Windows operating systems, ensure "Disk Write Caching" is enabled to achieve maximum write performance. This setting can typically be found in Device Manager under the disk drive properties.
Figure 2: The TREBLEET SSD enclosure connected to a laptop, demonstrating a typical usage scenario.
Requisits del sistema
Figure 3: System compatibility details for Mac and PC operating systems, including required Thunderbolt/USB4 versions and macOS/Windows versions.
Nota: PC, Chromebook, and Surface devices require a Thunderbolt 4, Thunderbolt 5, or USB4 interface for proper operation. Actual read and write speeds may vary based on SSD capacity, operating system, host device, and other environmental factors.
Manteniment
To ensure optimal performance and longevity of your enclosure:
- Mantingueu la carcassa neta i sense pols. Feu servir un drap suau i sec per netejar-la.
- Ensure the cooling fan vents are not obstructed to allow for proper heat dissipation. The built-in silent turbo cooling fan is designed to maintain optimal operating temperatures and prevent thermal throttling.
- Eviteu exposar el dispositiu a temperatures o humitat extremes.
Resolució de problemes
If you encounter issues with your TREBLEET SSD enclosure, refer to the following common problems and solutions:
| Problema | Possible causa/solució |
|---|---|
| Enclosure not recognized by computer |
|
| Velocitats de transferència de dades lentes |
|
| Insufficient power for high-capacity drives |
|
| Enclosure becomes warm during operation |
|
| Product not compatible with "M.2 NVMe key to PCIe adapter" |
|
Especificacions
| Característica | Detall |
|---|---|
| Número de model | TRE-8132 |
| Dimensions del producte | 4.1 x 2.55 x 0.51 polzades |
| Pes de l'article | 5.3 unces |
| Interfície del maquinari | Thunderbolt 4 (Compatible with Thunderbolt 5/4/3, USB4) |
| Velocitat de transferència de dades | Up to 80Gbps (Over 7000MB/s peak performance) |
| Xip de control | JHL9480 |
| Sistema de refrigeració | Active Cooling Fan & Premium Aluminum Shell |
| Port d'alimentació | Auxiliary USB-C PD Power Port |
| SSD compatibles | M.2 NVMe PCIe Gen 4x4 SSDs |
| Temperatura de funcionament recomanada | 5 °C ~ 35 °C (41 °F ~ 95 °F) |
| Temperatura no operativa | -20 °C ~ 60 °C (-4 °F ~ 140 °F) |
Figure 4: Partial test data showing read and write speeds for different SSD models when used with the TREBLEET enclosure on a MacBook Pro M4 Pro.
Informació de la garantia
TREBLEET products are typically covered by a limited manufacturer's warranty. For specific warranty terms and conditions, including duration and coverage details, please refer to the warranty card included with your product or visit the official TREBLEET weblloc web. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.
Suport
For technical assistance, troubleshooting, or general inquiries, please contact TREBLEET customer support through the following channels:
- Weblloc: Visit the official TREBLEET website for FAQs, driver downloads, and contact forms.
- Correu electrònic: Refer to your product packaging or the TREBLEET weblloc web per a adreces de correu electrònic d'atenció al client.
When contacting support, please have your product model number (TRE-8132) and proof of purchase readily available.
