TP-Link Mercusys MS116GS 16-Port Gigabit Switch User Manual

1. Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of your TP-Link Mercusys MS116GS 16-Port Gigabit Switch. The MS116GS is designed to expand your wired network with high-speed Gigabit Ethernet ports, offering features like Plug & Play setup, Isolation Mode, and Loop Prevention for enhanced network performance and security.

2. Producte acabatview

The Mercusys MS116GS is a 16-port Gigabit Ethernet switch, ideal for expanding network capacity in homes or small offices. It features a durable metal casing and fanless design for silent operation.

Figura 2.1: Davant view of the Mercusys MS116GS 16-Port Gigabit Switch, showing 16 RJ45 ports, LED indicators, and mode switches.

Característiques principals:

• Ports Gigabit complets: 16 RJ45 ports with 10/100/1000 Mbps auto-negotiation supporting Auto-MDI/MDIX.
• Plug and Play: Simple to use and saves time and effort.
• Mode d'aïllament: Allows one-click client traffic separation for higher security and performance.
• Prevenció de bucles: Automatically detects and blocks network loops to prevent broadcast storms.
• C de metall resistentasing: Allows for efficient heat dissipation and long network life.
• Funcionament silenciós: Fanless design for quiet use.

Contingut del paquet:

• Mercusys MS116GS 16-Port Gigabit Switch
• Adaptador d'alimentació
• Manual d'usuari

3. Configuració

The MS116GS switch is designed for easy installation. No software configuration is required.

3.1 Instal·lació física

1. Col·locació: Place the switch on a stable, flat surface, such as a desktop, or mount it in a rack. Ensure adequate ventilation around the device.
2. Connexió d'alimentació: Connect the provided power adapter to the switch's power port and then plug the adapter into a standard electrical outlet. The Power LED on the front panel should illuminate.
3. Connexions de xarxa: Connect your network devices (e.g., computers, printers, IP cameras, routers) to any of the 16 RJ45 ports using Ethernet cables. The corresponding Link/Act LED for each connected port will light up, indicating an active connection.

Figura 3.1: posterior view of the Mercusys MS116GS, showing the power input and ventilation.

Figura 3.2: Illustration of the Plug and Play setup, showing the switch connected to a computer.

3.2 Indicadors LED

The front panel features LED indicators to monitor the switch's status:

• LED d'alimentació:
  • Encès: l'interruptor està engegat.
  • Apagat: l'interruptor està apagat.
• LED d'enllaç/acció (per a cada port):
  • On: A device is connected to the corresponding port.
  • Flashing: Data is being transmitted or received through the corresponding port.
  • Apagat: no hi ha cap dispositiu connectat al port corresponent.

4. Instruccions de funcionament

The MS116GS switch operates automatically once connected. It supports two special modes: Isolation Mode and Loop Prevention Mode, which can be activated via physical switches on the device.

Figura 4.1: Close-up of the mode switches for Isolation and Loop Prevention, located on the right side of the switch.

4.1 Mode d'aïllament

Isolation Mode allows for one-click client traffic separation. When enabled, ports 1-14 are isolated from each other, preventing them from communicating directly. All isolated ports can still communicate with ports 15-16 (uplink ports). This mode enhances security and performance by preventing broadcast storms and improving LAN security.

• To enable Isolation Mode: Set the "Isolation" switch to the "On" position.
• To disable Isolation Mode: Set the "Isolation" switch to the "Off" position (Default Mode).

4.2 Loop Prevention Mode

Loop Prevention Mode automatically detects and blocks network loops. A network loop occurs when there are multiple paths between two network devices, which can cause broadcast storms and network instability. When a loop is detected, the switch will block the corresponding port to prevent network disruption.

• To enable Loop Prevention Mode: Set the "Loop Prevention" switch to the "On" position.
• To disable Loop Prevention Mode: Set the "Loop Prevention" switch to the "Off" position (Default Mode).

5. Manteniment

Proper maintenance ensures the longevity and optimal performance of your MS116GS switch.

• Neteja: Netegeu regularment l'exterior de l'interruptor amb un drap suau i sec. No utilitzeu netejadors líquids ni en aerosol.
• Ventilació: Ensure that the ventilation holes on the sides of the switch are not obstructed. Proper airflow is crucial for heat dissipation.
• Font d'alimentació: Use only the power adapter provided with the switch. Using an incorrect power adapter may damage the device.
• Medi ambient: Operate the switch within its specified temperature and humidity ranges. Avoid placing it in direct sunlight or near heat sources.

6. Solució De Problemes

This section addresses common issues you might encounter with your MS116GS switch.

6.1 El LED d'engegada està apagat

• Assegureu-vos que l'adaptador de corrent estigui connectat correctament a l'interruptor i a una presa de corrent que funcioni.
• Verifiqueu que la presa de corrent funciona correctament connectant-hi un altre dispositiu.

6.2 Link/Act LED is Off for a Connected Device

• Comproveu que el cable Ethernet estigui ben connectat tant al port del commutador com al dispositiu de xarxa.
• Ensure the connected device is powered on and its network adapter is functioning correctly.
• Try a different Ethernet cable or a different port on the switch.
• Verify that the cable length does not exceed the maximum recommended length (typically 100 meters for Ethernet).

6.3 Velocitat de xarxa lenta

• Ensure all connected devices and cables support Gigabit Ethernet (1000 Mbps) for optimal performance.
• Check for network loops. If Loop Prevention Mode is off, consider enabling it.
• If Isolation Mode is enabled, ensure it is not inadvertently affecting communication between devices that need to interact directly.
• Reinicieu el commutador i els dispositius connectats.

7. Especificacions

8. Garantia i Suport

For warranty information and technical support, please refer to the official Mercusys website or contact your local Mercusys support team. Details regarding spare parts availability and software update guarantees are not provided in the product specifications.

You can find more information and support resources at the official Mercusys weblloc: www.mercusys.com