SPYMINNPOO 7.4V RC Car USB Charging Cable User Manual

Introducció

This manual provides essential information for the safe and efficient use of your SPYMINNPOO 7.4V RC Car USB Charging Cable. Please read these instructions carefully before use to ensure proper operation and longevity of the product.

This image displays the SPYMINNPOO USB Charging Cable alongside a remote control car, illustrating its intended use.

Precaucions de seguretat

To prevent damage to the charger, battery, or connected devices, and to ensure user safety, observe the following precautions:

• The charging cable is equipped with overload, overvoltage, and overcharge guards. However, always monitor the charging process.
• Do not attempt to charge batteries other than 7.4V Li-Ion batteries with an XH 3-pin connector.
• Do not expose the charger to moisture, rain, or extreme temperatures.
• Mantingueu el carregador lluny de materials inflamables.
• No desmunteu ni modifiqueu el cable de càrrega.
• Ensure the USB power source provides a stable DC 5V output.

Producte acabatview

Contingut del paquet

• 1 x cable de càrrega USB

Característiques clau

• Materials premium: Constructed with ABS materials for durability and performance.
• Característiques de seguretat: Equipped with overload, overvoltage, and overcharge guards.
• Càrrega ràpida i fàcil: XH 3-pin connector for quick and convenient battery connection.
• Compatibilitat: Specifically designed for 1:18 scale remote control cars, including models 18301, 18302, 18303, and 18304.
• Subministrament d'energia eficient: Input DC 5V, Output 7.4V 1000mA for stable charging.

This image shows the central unit of the USB charging cable, featuring the USB-A plug and the cable leading to the XH 3-pin connector.

Instruccions de configuració

Follow these steps to set up your charging cable:

1. Identify the Battery: Ensure your RC car battery is a 7.4V Li-Ion type with an XH 3-pin connector.
2. Connecteu-vos a la font d'alimentació: Insert the USB-A end of the charging cable into a compatible DC 5V USB power source (e.g., a computer USB port, a USB wall adapter, or a power bank).
3. Connectar a la bateria: Carefully align the XH 3-pin connector of the charging cable with the corresponding port on your RC car battery. Push firmly until it clicks into place.

Un detallat view of the XH 3-pin connector, highlighting its design for easy and secure battery connection.

Instruccions de funcionament

Once the cable is properly connected, the charging process will begin:

1. After connecting the USB end to a power source and the XH 3-pin connector to the battery, the charger will automatically detect the battery and begin charging.
2. Monitor the charging process. While the charger has built-in safety features, it is good practice to periodically check the battery and charger for any unusual heat or odors.
3. Once the battery is fully charged, disconnect the battery from the charger, and then disconnect the charger from the USB power source.

Nota: The charging time will vary depending on the battery capacity and its current charge level.

Manteniment

Proper maintenance ensures the longevity and performance of your charging cable:

• Neteja: Feu servir un drap suau i sec per netejar el cable i els connectors. No utilitzeu netejadors líquids ni dissolvents.
• Emmagatzematge: Store the charging cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid kinking or bending the cable sharply.
• Inspecció: Periodically inspect the cable for any signs of damage, such as frayed wires or bent pins. Do not use a damaged cable.

Resolució de problemes

Si teniu problemes amb el cable de càrrega, consulteu els problemes i solucions habituals següents:

• La bateria no es carrega:
  • Ensure the USB power source is active and providing DC 5V. Try a different USB port or adapter.
  • Verify that the XH 3-pin connector is securely attached to the battery.
  • Confirm the battery is a 7.4V Li-Ion type with an XH 3-pin connector.
  • Check the cable for visible damage.
• Càrrega lenta:
  • Ensure the USB power source can deliver sufficient current (e.g., 1A or more).
  • The charging speed is fixed at 1000mA output; if it feels slow, the battery capacity might be very high, or the input power source is insufficient.
• Charger or Battery Getting Hot:
  • A slight warmth is normal during charging. However, if it becomes excessively hot, immediately disconnect the charger and battery.
  • Ensure proper ventilation around the charger and battery.
  • Do not charge a damaged or swollen battery.

Especificacions tècniques

Garantia i Suport

For warranty information or technical support, please refer to the documentation provided with your purchase or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.