Instruccions importants de seguretat
WARNING: INGESTION HAZARD. Aquest producte conté una pila de botó o una pila de moneda. LA MORT or serious injury can occur if ingested. A swallowed button cell or coin battery can cause Cremades químiques internes en tan poc com 2 hores. Keep new and used batteries FORA DE L'ACCESO DELS NENS. Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
- Always ensure the power adapter is disconnected from the power source before installation, maintenance, or troubleshooting.
- Do not expose the tape light or power adapter to excessive heat or direct flame.
- Do not submerge the tape light or power adapter in water. While designed for indoor/outdoor use, ensure connections are secure and protected from direct water exposure.
- Only use the provided power adapter and remote control with this product.
- Do not attempt to repair or modify the tape light or its components. Refer all servicing to qualified personnel.
- Ensure the installation surface is clean, dry, and smooth for proper adhesion.
- Do not bend the tape light sharply or at angles less than 90 degrees to prevent damage to the LED circuits.
- Mantingueu els materials d'embalatge lluny dels nens.
Contingut del paquet
Verifiqueu que tots els components que s'enumeren a continuació s'inclouen al paquet:
Figura 1: Contingut del paquet
- 1x Feit Electric 20ft Chasing & Tunable White LED Tape Light
- 1x comandament a distància
- 1x adaptador de corrent
- 10x clips de muntatge
- 20x cargols
Especificacions
Detailed technical specifications for the Feit Electric LED Tape Light:
| Número de model | TAPE240/CHASE |
| Longitud | 20 peus (6.1 metres) |
| Linkable Length | Fins a 40 peus (12.2 metres) |
| Sortida de llum | 1000 lúmens (lluminositat del blanc) |
| Consum d'energia | 24 watts |
| Voltage | 24 Volts DC |
| Color clar | RGB (Red, Green, Blue) + Tunable White |
| Característiques especials | Remote Controlled, Dimmable, Chasing Effects, Cut-to-Size, Linkable |
| Ús interior/exterior | Yes (Weather Resistant) |
| Vida útil | 25,000 hores |
| Dimensions (amplada) | 0.4 polzades (10 mm) |
| Mètode de control | Control Remot per Infrarojos |
Figure 2: Product Features and Dimensions
Guia de configuració
Follow these steps for proper installation of your LED Tape Light:
- Planifica el teu disseny: Before peeling the adhesive, unroll the tape light and lay it out in your desired location to confirm the length and placement. Ensure the power adapter can reach an outlet.
- Prepara la superfície: Clean the installation surface thoroughly. It must be dry, smooth, and free of dust, dirt, or grease for optimal adhesive performance.
- Cut to Size (Optional): If a shorter length is required, locate the designated cutting marks on the tape light (typically indicated by a scissor icon or copper pads). Cut only at these marked points to avoid damaging the circuit.
- Apply the Tape Light: Carefully peel off the backing from the adhesive strip on the back of the tape light. Press the tape light firmly onto the prepared surface, working in small sections to ensure good contact and avoid air bubbles.
- Assegureu-vos amb clips (opcional): For added security, especially on textured surfaces or in high-traffic areas, use the included mounting clips and screws. Space them evenly along the tape light.
- Connectar l'alimentació: Plug the tape light connector into the power adapter. Then, plug the power adapter into a standard electrical outlet.
- Link Multiple Strips (Optional): If linking multiple 20ft strips (up to a maximum of 40ft total), connect them end-to-end using the integrated connectors. Ensure the power supply is adequate for the total length.
Figura 3: Example Indoor Installation (Kitchen)
Figura 4: Example Outdoor Installation (Patio)
Instruccions de funcionament
Control your Feit Electric LED Tape Light using the included remote control:
Figure 5: Remote Control and Tape Light
- Encès/apagat: Premeu el botó Botó d'encesa (red button, top right) to turn the lights on or off.
- Ajust de brillantor: Utilitza el Brillantor cap amunt (▲) i Brillantor avall (▼) buttons to adjust the light intensity.
- Selecció de color:
- Premeu el botó RGB color buttons (Red, Green, Blue, etc.) to select a static color.
- Premeu el botó "W" button for Tunable White light.
- Modes dinàmics:
- ChasinEfectes g: Utilitza el "Chase" button to activate dynamic chasing light patterns.
- Altres modes: Explore buttons like "Flash", "Strobe", "Fade", i "Smooth" for various light transitions and effects.
- Ajust de velocitat: Utilitza el Accelera i Accelerar baix buttons to control the pace of dynamic modes.
- Funció de temporitzador: Alguns comandaments a distància poden incloure una funció de temporitzador. Consulteu les marques específiques del comandament a distància per obtenir més informació.
Figure 6: Kitchen with Red Light
Figure 7: Kitchen with Warm White Light
Figure 8: Kitchen with Cool White Light
Manteniment
To ensure the longevity and optimal performance of your LED Tape Light, follow these maintenance guidelines:
- Neteja: Disconnect the power adapter before cleaning. Use a soft, dry, or slightly damp cloth to wipe the tape light. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the product.
- Inspecció: Periodically inspect the tape light and power adapter for any signs of damage, such as frayed wires, cracks, or loose connections. If any damage is found, discontinue use and contact customer support.
- Emmagatzematge: If storing the tape light for an extended period, ensure it is clean and dry. Coil it loosely to prevent kinks or damage to the LED strip. Store in a cool, dry place away from direct sunlight.
- Substitució de la bateria (comandament a distància): If the remote control's range or responsiveness decreases, the battery may need replacement. Refer to the remote's battery compartment for the correct battery type (typically a CR2025 or similar coin cell battery) and replacement instructions. Ensure proper polarity.
Resolució de problemes
If you encounter issues with your Feit Electric LED Tape Light, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Els llums no s'encenen. | Sense corrent, connexió fluixa, adaptador de corrent defectuós. |
|
| El control remot no funciona. | Remote battery is dead, remote is too far, obstruction, IR receiver blocked. |
|
| Les llums són tènues o parpellejant. | Insufficient power, damaged section of tape light, loose connection. |
|
| L'adhesiu no s'enganxa. | Improper surface preparation, surface type. |
|
Informació de la garantia
This Feit Electric LED Tape Light is covered by a Garantia del fabricant de 1 anys des de la data de compra. Aquesta garantia cobreix els defectes de materials i fabricació en condicions d'ús normal. No cobreix els danys resultants d'un mal ús, abús, accidents, reparacions no autoritzades o modificacions. Conserveu el comprovant de compra per a reclamacions de garantia.
Atenció al client
For further assistance, technical support, or warranty inquiries, please contact Feit Electric customer support.
Visit our online support portal for FAQs and contact options:
https://help.feit.com/hc/en-us
