Aimpoint ACRO™ P-2 Red Dot Reflex Sight User Manual

Introducció

This manual provides comprehensive instructions for the proper setup, operation, maintenance, and troubleshooting of your Aimpoint ACRO™ P-2 Red Dot Reflex Sight. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

The Aimpoint ACRO™ P-2 is an advanced, ultra-compact red dot sight designed for demanding applications. It features a fully enclosed optical channel, extended battery life, and robust construction to withstand extreme conditions.

Producte acabatview

The Aimpoint ACRO™ P-2 is a high-performance red dot sight engineered for reliability and precision. Key features include:

• 3.5 MOA Red Dot: Provides a clear and precise aiming point.
• Durada de la bateria ampliada: Up to 50,000 hours (over 5 years) of constant-on operation using a single CR2032 battery.
• Low-Profile Disseny: Optimized for applications requiring a compact sighting system.
• Durabilitat extrema: Submersible to 115 feet (35 meters) and built to withstand intense shock, vibration, and temperature variations.
• Enclosed Emitter: Fully enclosed optical channel protects the LED emitter from environmental elements.

Figura 1: Frontal view of the Aimpoint ACRO P-2 Red Dot Reflex Sight. This image shows the compact and robust design of the sight, highlighting its primary optical lens.

Contingut del paquet

En obrir el paquet, comproveu que hi hagi tots els components:

• Aimpoint ACRO™ P-2 Red Dot Reflex Sight
• Pila CR2032 (preinstal·lada o inclosa per separat)
• Aimpoint T10 Tool
• Manual d'usuari (aquest document)

If any items are missing or damaged, please contact Aimpoint customer support immediately.

Configuració

1. Instal·lació de la bateria

The ACRO P-2 uses a single CR2032 battery. The battery compartment is designed for easy access without removing the sight from its mount.

1. Locate the battery cap on the side of the sight.
2. Using the supplied Aimpoint T10 tool or a suitable coin, unscrew the battery cap counter-clockwise.
3. Insert the CR2032 battery with the positive (+) side facing outwards (towards the cap).
4. Carefully screw the battery cap back on clockwise until it is finger-tight. Do not overtighten.

Figura 2: lateral view of the Aimpoint ACRO P-2, showing the battery compartment and the brightness adjustment buttons. The battery cap is visible on the right side, and the '+' and '-' buttons are on the left.

2. Mounting the Sight

The ACRO P-2 is designed for Weaver Mount compatibility, making it suitable for various handgun and rifle platforms. Ensure your firearm has a compatible mounting system.

1. Ensure the firearm is unloaded and safe before proceeding.
2. Align the sight's mounting base with the corresponding slots on your firearm's rail.
3. Secure the sight using the appropriate mounting screws. Refer to your specific mount's instructions for torque specifications. Overtightening can damage the sight or mount.
4. Verify that the sight is firmly attached and does not wobble.

Figura 3: lateral view of the Aimpoint ACRO P-2, displaying the "ACRO P-2 3.5MOA" designation and the mounting screw locations. This view helps identify the model and the points for secure attachment.

Instruccions de funcionament

1. Powering On/Off and Brightness Adjustment

The ACRO P-2 features intuitive controls for power and brightness.

• Encès: Press either the '+' or '-' button to turn on the sight. The sight will illuminate the red dot at the last used brightness setting.
• Ajusta la brillantor: Press the '+' button to increase brightness and the '-' button to decrease brightness. There are multiple daylight and night vision compatible settings.
• Apagar: Press and hold the '-' button for approximately 3 seconds until the red dot extinguishes.

2. Zeroing the Sight

Zeroing the sight is crucial for accurate shooting. This process adjusts the point of impact to match your point of aim.

1. Set up a target at a known distance (e.g., 25 yards/meters).
2. Using the Aimpoint T10 tool, locate the windage (R) and elevation (U) adjustment screws on the sight.
3. Ajust d'elevació: To move the point of impact UP, turn the 'U' screw counter-clockwise. To move it DOWN, turn clockwise.
4. Ajust del vent: To move the point of impact RIGHT, turn the 'R' screw counter-clockwise. To move it LEFT, turn clockwise.
5. Make small adjustments (each click represents a specific change in MOA, refer to specifications for exact value) and fire a group of shots to verify the adjustment. Repeat until the point of aim matches the point of impact.

Figura 4: Angle view of the Aimpoint ACRO P-2, highlighting the windage and elevation adjustment turrets. These turrets are used to precisely zero the sight to the firearm.

Manteniment

Proper maintenance ensures the longevity and reliability of your Aimpoint ACRO™ P-2.

1. Neteja

• Lents: Use a soft, clean cloth or lens paper to wipe the lenses. For stubborn dirt, use a small amount of lens cleaning fluid. Avoid abrasive materials.
• Habitatge: Wipe the sight's housing with a damp cloth. For more thorough cleaning, a mild soap solution can be used. Ensure no water enters the battery compartment if the cap is not fully sealed.
• Contactes de la bateria: Periodically inspect the battery contacts for corrosion. Clean with a pencil eraser or cotton swab if necessary.

2. Substitució de la bateria

Replace the CR2032 battery when the red dot becomes dim or fails to illuminate. With typical use, the battery should last approximately 5 years (50,000 hours) of constant-on operation. Refer to the "Battery Installation" section under Setup for replacement instructions.

3. Emmagatzematge

When not in use for extended periods, it is recommended to turn off the sight to conserve battery life, although its constant-on capability is designed for long durations. Store the sight in a cool, dry place, protected from direct sunlight and extreme temperatures.

Resolució de problemes

If the problem persists after attempting these solutions, please contact Aimpoint customer support.

Especificacions

Garantia i Suport

Informació de la garantia

Aimpoint guarantees its products to be free from original manufacturer defects in material and/or workmanship under normal use for a period of 2 years for professional or competition use i 10 years for personal use des de la data de compra.

Conserveu el vostre comprovant de compra per a reclamacions de garantia.

Atenció al client

For technical assistance, warranty claims, or general inquiries, please visit the official Aimpoint weblloc web o contacteu directament amb el seu servei d'atenció al client.

Aimpoint Official Weblloc: www.aimpoint.com

Fabricant: Apuntar