Informació important de seguretat
WARNING: This product contains a gas lift mechanism. Always follow the instructions for proper use and assembly to prevent injury. Be cautious of sharp edges during assembly. Do not exceed the maximum weight capacity of 264 lbs. Keep away from heat sources and open flames. Always use the chair on a stable surface.
- Assegureu-vos que tots els cargols i cargols estiguin ben ajustats abans d'utilitzar-los.
- No us atureu a la cadira.
- Avoid placing heavy objects on the chair that could cause instability.
- Regularly inspect the chair for loose parts or damage.
Contingut del paquet
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer service.
- Hbada P2 Ergonomic Office Chair components
- Kit de ferreteria de muntatge
- Welcome guide (this manual)
Image: Fully assembled Hbada P2 Office Chair in a home office setting.
Instruccions de muntatge
Follow these steps carefully to assemble your Hbada P2 Office Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Desempaquetar components: Traieu amb cura totes les peces de l'embalatge i col·loqueu-les.
- Fixeu les rodes a la base: Insert the casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
- Inseriu l'elevador de gas: Col·loqueu el cilindre d'elevació de gas al forat central de la base de la cadira.
- Muntar el mecanisme del seient: Attach the seat mechanism to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism faces the front of the seat.
- Col·loqueu els recolzabraços: Fixeu els reposabraços al coixí del seient amb els cargols designats.
- Connectar el respatller al seient: Attach the backrest to the seat assembly.
- Muntar el conjunt del seient a l'elevador de gas: Col·loqueu amb cura el seient i el respatller muntats sobre el cilindre d'elevació de gas.
- Fixar el reposacaps: Slide the headrest into the slots at the top of the backrest.
- Comprovació final: Verify all connections are secure and the chair functions correctly.
Image: Diagram illustrating the key dimensions of the Hbada P2 Office Chair.
Instruccions de funcionament
Your Hbada P2 Office Chair offers several adjustable features to customize your seating experience.
1. Ajust d'alçada del seient
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the seat, or pull it up while standing to raise the seat. Release the lever at the desired height.
2. Funció reclinable
The chair can recline and lock into three positions: 90° (upright), 110° (relaxed), and 135° (nap). To recline, pull the lever on the left side beneath the seat. Lean back to your desired angle and push the lever down to lock it. To return to an upright position, pull the lever up and lean forward.
Image: Illustration showing the 90°, 110°, and 135° reclining angles of the chair.
3. 3D Adjustable Lumbar Support
The lumbar support can be adjusted in height, depth, and width to conform to your lower back. Locate the adjustment controls on the backrest. Adjust the support until it provides optimal comfort and alignment for your spine.
- Ajust d'alçada: Push the lumbar support up or down.
- Ajust de profunditat: Rotate the knob (if present) or push the support forward/backward.
- Side-to-Side Motion: The lumbar support offers 10° side-to-side motion for dynamic support.
Imatge: Detallada view of the 3D adjustable lumbar support, showing height, depth, and side-to-side adjustments.
4. 2D Adjustable Headrest
The headrest can be adjusted in height and swivel angle. Grasp the headrest and move it up or down to your preferred height. It also swivels 40° to provide neck support.
Image: Close-up of the 2D adjustable headrest, highlighting its height and swivel capabilities.
5. Ajust del reposabraços
The armrests are height-adjustable with a 7.5 cm (approximately 3 inches) range. Locate the button or lever on the side of each armrest. Press it and move the armrest up or down to your desired height. Release the button/lever to lock it in place.
Imatge: View of the armrest, indicating the mechanism for height adjustment.
Manteniment
Proper maintenance ensures the longevity and optimal performance of your Hbada P2 Office Chair.
- Neteja:
- For mesh and fabric surfaces, use a soft cloth dampened with mild soap and water. Avoid harsh chemicals.
- For plastic and metal parts, wipe with a clean, damp tela.
- Do not saturate the chair with water.
- Inspecció: Reviseu periòdicament tots els cargols i perns per assegurar-vos que estiguin ben ajustats. Torneu a apretar-los si cal.
- Rodes: Keep casters clean from hair and debris to ensure smooth movement.
- Ascensor de gas: Do not attempt to disassemble or repair the gas lift cylinder yourself. Contact customer service if it malfunctions.
Image: Diagram illustrating the layered construction of the elastic foam seat cushion.
Resolució de problemes
If you encounter any issues with your Hbada P2 Office Chair, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La cadira no ajusta l'alçada | Mal funcionament de l'elevador de gas o palanca no accionada. | Ensure the height adjustment lever is fully engaged. If the issue persists, contact customer service. |
| La cadira trontolla o és inestable | Cargols solts o muntatge desigual. | Check and tighten all assembly screws. Ensure the chair is on a flat, stable surface. |
| Les rodes no giren suaument | Restes atrapades a les rodes. | Clean any hair, dust, or debris from the caster wheels. |
| El respatller no es reclina ni es bloqueja | Recline mechanism not engaged or damaged. | Ensure the recline lever is fully engaged. If the mechanism is stuck, try gently rocking the chair while adjusting. Contact customer service if it remains unresponsive. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | Hbada |
| Número de model | P2 |
| Color | Blanc |
| Alçada total | 105.5 - 126.5 cm (41.5 - 49.8 polzades) |
| Amplada de la base | 70 cm (27.6 polzades) |
| Amplada del seient | 51 cm (20.1 polzades) |
| Profunditat del seient | 52 cm (20.5 polzades) |
| Rang d'alçada del seient | 40 - 48 cm (15.7 - 18.9 polzades) |
| Pes de l'article | 43 lliures |
| Estil d'esquena | Mesh Back |
| Material de farciment | Escuma de memòria |
| Posicions reclinables | 3 (90°, 110°, 135°) |
| Suport lumbar | 3D Adjustable (Height, Depth, Width, 10° Side-to-Side Motion) |
| Reposacaps | 2D Adjustable (Height, 40° Swivel) |
| Reposabraços | Height Adjustable (7.5 cm / 3 inches range) |
| Capacitat màxima de pes | 264 lliures |
Garantia i assistència al client
Your Hbada P2 Ergonomic Office Chair comes with a comprehensive warranty and dedicated customer support.
- Garantia: This product is covered by a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.
- Devolucions: A 30-day free return policy is available.
- Price Match: A 15-day price match guarantee is offered.
- Atenció al client: For any questions, assistance with assembly, troubleshooting, or warranty claims, please contact Hbada customer service. Refer to the welcome guide or the official Hbada weblloc per obtenir dades de contacte.
