1. Introducció
Thank you for choosing the EUHOMY Commercial Ice Maker Machine. This manual provides essential information for the safe and efficient operation, installation, maintenance, and troubleshooting of your ice maker. Please read this manual thoroughly before using the appliance and retain it for future reference.
2. Instruccions de seguretat importants
- Assegureu-vos que la màquina de gel estigui col·locada sobre una superfície estable i plana, allunyada de la llum solar directa o de fonts de calor.
- No feu servir l'aparell amb un cable o un endoll danyats.
- Always unplug the ice maker before cleaning or performing any maintenance.
- No submergiu l'aparell, el cable o l'endoll en aigua o altres líquids.
- Mantingueu les obertures de ventilació lliures d'obstruccions.
- This appliance is intended for commercial use and should be operated by trained personnel.
- Ensure the drain pipe is properly positioned below the machine's drain outlet to prevent water overflow.
- Allow the unit to stand upright for at least 24 hours before initial use after transport.
3. Producte acabatview
3.1 Components principals
The EUHOMY Commercial Ice Maker is designed for high-efficiency ice production, capable of producing up to 70 lbs of ice per day with a 12 lbs storage capacity. It features a durable pure copper compressor and an upgraded water filter for clean ice.
Figure 3.1: EUHOMY Commercial Ice Maker Machine with included accessories such as water filter, hoses, and ice scoop.
3.2 Tauler de control
The intelligent LCD control panel allows for easy operation and monitoring of the ice maker's status. It displays environmental temperature and allows adjustment of ice cube size and setting the timer.
Figura 3.2: Detallada view of the control panel, showing indicators for ice making, reservation, cleaning, water shortage, ice full, ice falling, and buttons for power, reservation, clean, light, time up, and time down.
- POTÈNCIA: Encén/apaga la màquina.
- RESERVA: Activates the 24-hour timer function.
- NETEJA: Inicia el cicle d'autoneteja.
- LLUM: Controls the internal light.
- TIME UP/DOWN: Adjusts ice making time (for thickness) and timer settings.
- Indicadors: Ice making, Reservation, Cleaning, Water shortage, Ice full, Ice falling.
4. Configuració
4.1 Desembalatge
Carefully remove the ice maker from its packaging. Inspect for any shipping damage. Remove all packing materials, tapes, and protective films.
4.2 Col·locació
Place the ice maker on a firm, level surface. Ensure there is adequate ventilation around the unit (at least 10 cm clearance on all sides). Avoid placing it near heat sources or in direct sunlight. Allow the unit to stand upright for at least 24 hours before plugging it in to allow the refrigerant to settle.
4.3 Connexió d'aigua
Connect the water inlet hose to a potable water supply. Install the provided water filter in line with the water supply. Connect the drain hose to the machine's drain outlet and ensure it leads to a suitable drain (gravity drainage is required). Make sure the drain pipe is positioned lower than the machine's drain outlet.
Figure 4.1: Simple installation diagram illustrating connections for water filter, faucet, power, and drain hose.
4.4 Connexió d'alimentació
Plug the ice maker into a grounded electrical outlet with the correct voltage (115 volts). No utilitzeu cables d'extensió ni adaptadors.
4.5 Neteja inicial
Before making the first batch of ice, it is recommended to clean the machine. Press the "CLEAN" button for more than 5 seconds to enter the "Cleaning Program". Run this cycle twice to ensure the internal components are clean.
5. Instruccions de funcionament
5.1 Fabricació de gel
After setup and initial cleaning, press the "POWER" button to start the ice making process. The machine will automatically produce ice cubes. A batch of 36 clear ice cubes is typically ready in 8-12 minutes.
5.2 Ajust del gruix del gel
The thickness of the ice cubes can be adjusted to suit different needs. Use the "TIME UP" and "TIME DOWN" buttons on the control panel to increase or decrease the ice making time. Longer ice making time results in thicker ice cubes.
Figure 5.1: Ice thickness adjustment guide. Thin ice (approx. 10 mins), Medium ice (approx. 15 mins), Thick ice (approx. 20 mins).
5.3 Funció de temporitzador
The 24-hour timer function allows you to set a specific time for the ice maker to start or stop operation. Press the "RESERVATION" button and use the "TIME UP/DOWN" buttons to set the desired time.
5.4 Ice Full / Water Shortage Indicadors
The control panel will display indicators for "Ice Full" when the ice storage bin is full, and "Water Shortage" when the water level is too low. The machine will pause operation until the condition is resolved.
6. Cura i Manteniment
6.1 Neteja regular
Regular cleaning is essential for maintaining the performance and hygiene of your ice maker. It is recommended to clean the machine according to its usage frequency. Wipe down the exterior with a soft, damp cloth. Clean the ice storage bin and water tank regularly.
6.2 Funció d'autoneteja
The ice maker features a convenient self-cleaning function. To activate, press and hold the "CLEAN" button for 5 seconds. The cleaning cycle typically takes 5 minutes to complete.
Figure 6.1: Self-cleaning function initiated by pressing the 'CLEAN' button for 5 seconds, followed by a 5-minute cleaning process.
6.3 Escorregut d'aigua
To ensure optimal performance and hygiene, it is suggested to drain the water from the machine once a day. This can be done by taking out the small hose on the right side of the water tank to allow gravity drainage.
7. Guia de resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La màquina de gel no produeix gel. | No water supply; Water filter clogged; Ambient temperature too high; Power issue. | Check water connection and supply; Replace water filter; Ensure proper ventilation; Check power cord and outlet. |
| Els glaçons de gel són massa prims o massa gruixuts. | Ice making time setting incorrect. | Adjust ice making time using the TIME UP/DOWN buttons. |
| "Aigua a la vora"tage" indicator is on. | Subministrament d'aigua insuficient. | Ensure water supply is connected and turned on; Check for kinks in the water hose. |
| L'indicador "Gel ple" està encès. | El dipòsit d'emmagatzematge de gel és ple. | Remove ice from the storage bin. |
| La màquina fa soroll. | Unitat no anivellada; obstrucció del ventilador. | Ensure the unit is on a level surface; Check for any obstructions around the fan. |
8. Especificacions tècniques
Below are the detailed specifications for the EUHOMY Commercial Ice Maker Machine:
Figure 8.1: Product information graphic detailing dimensions and key specifications.
| Especificació | Valor |
|---|---|
| Nom del model | CIM011-70BL |
| Dimensions del producte | 33.5P x 34.5A x 62.5A centímetres (13.18P x 13.58A x 24.6A polzades) |
| Pes | 19.2 kg |
| Capacitat de producció de gel | 70 lliures / 24 hores |
| Capacitat d'emmagatzematge de gel | 12 lliures (5.9 kg) |
| Temps de producció de gel (per lot) | 8-12 minuts (ajustable) |
| Voltage | 115 Volts |
| Wattage | 223 watts |
| Refrigerant | R290a |
| Fabricant | EUHOMIA |
| UPC | 850071871296 |
9. Garantia i atenció al client
For warranty information, technical assistance, or any questions regarding your EUHOMY Commercial Ice Maker Machine, please contact EUHOMY customer support. Refer to your purchase documentation for specific warranty terms and contact details. Always provide your model number (CIM011-70BL) and ASIN (B0DX26SVQ4) when contacting support for faster service.
Visit the official EUHOMY store for more information: EUHOMY Store
