Introducció
The PeakTech P1072 is a compact, smart True RMS digital multimeter designed for accurate electrical measurements. It features automatic function recognition (Auto-Scan) and auto-ranging, simplifying operation for various tasks. This device is suitable for students, technicians, and DIY enthusiasts, offering a wide range of measurement functions including voltage, resistance, continuity, diode test, and temperature.
Informació de seguretat
Always observe standard safety precautions when using electrical testing equipment. This multimeter is rated for CAT III 600 V, indicating its suitability for measurements in building installations. Ensure the device and test leads are in good condition before use. Do not attempt to measure voltages exceeding the specified limits.
- No utilitzeu el dispositiu si sembla malmès.
- Ensure correct connection of test leads for each measurement.
- Avoid contact with live circuits.
- Canvieu les piles immediatament quan aparegui l'indicador de bateria baixa.
Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- PeakTech P1072 Digital Multimeter
- Cables de prova (vermell i negre)
- Sensor de temperatura
- Piles AAA (2x)
- Manual d'instruccions
Image: The PeakTech P1072 multimeter shown with its included test leads, temperature sensor, and two AAA batteries.
Producte acabatview
Familiarize yourself with the components of your PeakTech P1072 multimeter:
Image: A detailed diagram highlighting the LCD display, function buttons, input jacks, NCV sensor, and LED light on the PeakTech P1072 multimeter.
- Pantalla LCD: 4000 count display with blue backlight for clear readings. Changes to red for NCV or Live Test detection.
- O/FUNC Button: Power On/Off and function selection in certain modes.
- HOLD/* Button: Freezes the current reading on the display. Also activates the backlight/LED flashlight.
- Preses d'entrada:
- COM (Comú): For black test lead.
- VΩHzLIVE: For red test lead for voltage, resistance, frequency, Live Test, diode, continuity, and temperature measurements.
- Sensor NCV: Located at the top for non-contact voltage detecció.
- Llum LED: Integrated flashlight on the back for illuminating dark work areas.
- Suport de peu: Foldable stand on the back for hands-free operation.
Configuració
1. Instal·lació de la bateria
The multimeter requires two AAA batteries. To install or replace them:
- Assegureu-vos que el multímetre estigui apagat i que els cables de prova estiguin desconnectats.
- Localitzeu el compartiment de la bateria a la part posterior del dispositiu.
- Open the battery cover using a screwdriver if necessary.
- Insert two AAA batteries, observing the correct polarity (+/-).
- Tanqueu la tapa de la bateria amb seguretat.
2. Connexió dels cables de prova
Connect the test leads as follows for most measurements:
- Introduïu el cable de prova negre al COM jack.
- Introduïu el cable de prova vermell al VΩHzLIVE jack.
Instruccions de funcionament
Encès/Apagat
Premeu el botó O/FUNC button to turn the multimeter on. Press and hold the O/FUNC button for approximately 5 seconds to turn it off.
Auto-Scan and Auto-Range Function
The P1072 features an intelligent ESCÀNER AUTOMÀTIC function. When powered on, the device automatically detects the type of measurement (AC/DC voltage, resistance, continuity) based on the connected circuit. The AUTO-RANGE function automatically selects the appropriate measurement range for optimal accuracy.
Image: The PeakTech P1072 multimeter in use, demonstrating its ability to measure voltage, resistance, frequency, capacitance, diode, and temperature.
Funcions de mesura
- Voltage Measurement (ACV/DCV):
Connect the test leads to the circuit in parallel. The multimeter will automatically detect AC or DC voltage. Max input: 600V AC/DC.
- Resistance Measurement (Ω):
Ensure the circuit is de-energized. Connect the test leads across the component to measure resistance.
- Prova de continuïtat ()))):
For checking circuit continuity. If resistance is below a certain threshold, an audible beep will sound.
- Diode Test (→|):
Connecteu els cables de prova al díode. La pantalla mostrarà el volum directe.tage gota.
- Temperature Measurement (°C):
Connect the included temperature sensor to the VΩHzLIVE and COM jacks. The display will show the temperature reading.
- Capacitance Measurement (F):
Ensure the capacitor is discharged before testing. Connect the test leads across the capacitor terminals.
- Mesura de freqüència (Hz):
Connect the test leads to the signal source. The multimeter will display the frequency.
- NCV (vol sense contacte).tage) Detecció:
Hold the top part of the multimeter near a live AC voltage source. The display backlight will turn red, and an audible alarm will sound if voltages detecta e.
- Prova en directe:
Insert the red test lead into the VΩHzLIVE jack and touch the probe to a live conductor. The display backlight will turn red, indicating a live phase. The black lead is not used for this test.
HOLD Function and Backlight/LED
Premeu el botó HOLD/* button briefly to freeze the current reading on the display. Press it again to release. Press and hold the HOLD/* button to activate the display backlight and the integrated LED flashlight. Press and hold again to turn them off.
Manteniment
Canvi de bateria
When the low battery indicator appears on the display, replace the batteries as described in the "Setup" section to ensure accurate measurements.
Neteja
Netegeu el dispositiu amb un anunciamp drap i un detergent suau. No utilitzeu abrasius ni dissolvents. Assegureu-vos que el dispositiu estigui completament sec abans d'utilitzar-lo.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense pantalla quan està encès | Bateries gastades o mal instal·lades | Canvieu les piles, comproveu la polaritat |
| Lectures inexactes | Low battery, incorrect function, damaged leads | Replace batteries, ensure correct function, check/replace leads |
| "OL" or "OVER" on display | S'ha superat l'interval de mesura | The auto-range function should handle this; if not, the value is too high for the device. |
| NCV/LIVE test not working | Cap voltage present, device malfunction | Test on a known live circuit. If still not working, contact support. |
Especificacions
| Característica | Detall |
|---|---|
| Mostra | 4000 Count LCD with blue backlight |
| Voltage (AC/DC) | Fins a 600 V |
| Resistència | Sí |
| Continuïtat | Yes (with audible alarm) |
| Prova de díode | Sí |
| Temperatura | Yes (up to 1200 °C) |
| Capacitat | Sí |
| Freqüència | Sí |
| NCV (vol sense contacte).tage) | Sí |
| LIVE Test | Sí |
| Classificació de seguretat | CAT III 600 V, EN 61010-1 |
| Font d'alimentació | 2x piles AAA (incloses) |
| Dimensions (L x A x A) | 12.5 x 6 x 2.5 cm |
| Pes | 250 g |
Garantia i Suport
The PeakTech P1072 Digital Multimeter comes with a Garantia del fabricant de 3 anys. For technical support, service, or warranty claims, please contact your retailer or PeakTech customer service. Refer to the official PeakTech website for contact information and further resources.
Per a més informació, visiteu el PeakTech Brand Store.
