Introducció
This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of your TRU COMPONENTS TC-Q400-T Industrial Wireless Remote Control. This device is designed to control motors, vehicles, or machines across four distinct channels, offering a reliable operating range of over 100 meters. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage.
Producte acabatview
Imatge: The TRU COMPONENTS TC-Q400-T Industrial Wireless Remote Control. It features an orange casing with a black top panel. Key elements visible include a red rotary switch, a green 'START' button, a 'STATUS' indicator light, four channel indicator lights (D, C, B, A), and four large black control buttons with white directional arrows (up, down, left, right). A yellow wrist strap is attached to the bottom of the device.
The TC-Q400-T is a robust industrial-grade wireless remote control, specifically designed as a transmitter unit. It features a durable housing, intuitive controls, and a secure wrist strap for ease of use in various industrial environments. The device operates on a frequency range of 433.88 - 433.95 MHz, ensuring stable communication over long distances.
Configuració
- Instal·lació de la bateria: Locate the battery compartment on the rear of the remote control. Open the compartment cover and insert the required batteries, ensuring correct polarity (+/-). Close the cover securely. (Specific battery type not provided, assume standard industrial batteries)
- Encesa inicial: Turn the red rotary switch to the 'ON' position. The 'STATUS' indicator light should illuminate, indicating the device is powered on.
- Emparellament (si cal): While this transmitter is typically pre-paired with its corresponding receiver, if pairing is necessary, refer to the receiver's manual for specific pairing instructions. Ensure both devices are within range during the pairing process.
- Fixeu la corretja del canell: Secure the yellow wrist strap to the designated attachment point at the bottom of the remote control to prevent accidental drops.
Instruccions de funcionament
The TC-Q400-T remote control features a simple and effective layout for controlling connected machinery.
- Encès/apagat: Use the red rotary switch to power the unit ON or OFF.
- Botó INICI: Press the green 'START' button to initiate the operation of the connected machine or system.
- Indicador d'ESTAT: The central 'STATUS' light provides feedback on the remote's operational state (e.g., power on, signal transmission, low battery). Refer to the receiver's manual for specific status light interpretations.
- Channel Indicators (A, B, C, D): These lights indicate which of the four channels are currently active or selected.
- Botons de control: The four large black buttons with directional arrows (up, down, left, right) are used to send commands to the connected machinery. Each button corresponds to a specific function or movement depending on the configured receiver. This model supports 4 buttons with 1 speed control.
- Interval de funcionament: Maintain the remote control within 100 meters of the receiver for optimal performance. Environmental factors may affect the actual range.
Manteniment
- Neteja: Clean the remote control regularly with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used. Do not use abrasive cleaners, solvents, or immerse the device in water.
- Substitució de la bateria: Replace batteries promptly when the 'STATUS' indicator shows a low battery warning or when the remote's performance degrades. Always use the recommended battery type.
- Emmagatzematge: Store the remote control in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. If storing for extended periods, remove the batteries to prevent leakage.
- Inspecció: Periodically inspect the casing, buttons, and wrist strap for any signs of damage or wear. Do not use the device if it appears damaged.
Resolució de problemes
- El comandament a distància no respon:
- Ensure the red rotary switch is in the 'ON' position.
- Comproveu els nivells de la bateria i substituïu-la si cal.
- Verify the remote is within the operating range of the receiver (within 100m).
- Confirm the receiver is powered on and functioning correctly.
- Curt abast operatiu:
- Substituïu les piles per unes de noves.
- Ensure there are no significant obstructions (e.g., thick walls, metal structures) between the transmitter and receiver.
- Check for sources of strong electromagnetic interference in the vicinity.
- Indicator Lights Not Functioning:
- Comproveu els nivells de bateria.
- If the issue persists after battery replacement, contact customer support.
Especificacions
- Número de model: TC-12835196
- Marca: COMPONENTS VERT
- Canals: 4-channel (transmitter only)
- Botons de control: 4 buttons, 1 speed
- Interval de freqüència: 433.88 - 433.95 MHz
- Interval de funcionament: ≥ 100 metres
- País d'origen: Xina
- Primer disponible: 28 de febrer de 2025
- Availability of Spare Parts (EU): 1 any
Garantia i Suport
TRU COMPONENTS provides a warranty for a period of at least 2 anys from the date of purchase for this product. This warranty covers defects in materials and workmanship under normal use.
For technical support, warranty claims, or inquiries regarding spare parts, please contact your retailer or the TRU COMPONENTS customer service. Please have your model number (TC-12835196) and proof of purchase ready when contacting support.
For more information, you may visit the official TRU COMPONENTS weblloc web o consulteu les dades de contacte que us proporcionen amb la documentació de compra.
