1. Introducció
This manual provides essential information for the safe and effective use of your Andeman EP-177 4000A Jump Starter with 150PSI Air Compressor. Please read all instructions carefully before operation and retain this manual for future reference.
Image 1.1: Andeman EP-177 Jump Starter with Air Compressor and included accessories.
2. Què hi ha a la caixa
Verifiqueu que tots els components siguin presents al paquet:
- Epower-177 Jump Starter x1
- Gas Needle x1
- Gas Nozzle x2
- Guia de l'usuari x1
- Jumper Cable x1
- Inflatable Tube x1
- Bossa d'emmagatzematge x1
- Cable de càrrega x1
Image 2.1: All items included in the Andeman EP-177 product package.
3. Característiques del producte
The Andeman EP-177 combines multiple functionalities for automotive and portable power needs:
- 4000A Peak Jump Starter: Capable of starting 12V vehicles with up to 8.5L gas or 7L diesel engines.
- Compressor d'aire de 150 PSI: Integrated portable inflator for tires, sports equipment, and other inflatables.
- Banc d'energia de 24000 mAh: High-capacity battery with Type-C Quick Charge and USB-A/USB-B outputs for charging electronic devices.
- Llum LED multimode: Features standard illumination, SOS, and alert modes for various situations.
- 10 Safety Protections: Advanced safety features including overload, spark, reverse polarity, and over-temperature protection.
Image 3.1: The Andeman EP-177 functioning as both a jump starter and a tire inflator.
4. Especificacions
| Característica | Especificació |
|---|---|
| Marca | Andeman |
| Model | Epower-177 |
| Corrent màxima de sortida | 4000 Amps |
| Capacitat de la bateria | 24000 mAh |
| Compatibilitat del motor | Fins a 8.5 L de gasolina / 7 L de dièsel |
| Pressió del compressor d'aire | Up to 150PSI |
| Charging Input (Type-C) | 5V/3A, 9V/2A, 12V/1.5A |
| Sortida USB-A | QC3.0 |
| Sortida USB-B | 5V/3A |
| Sortida de corrent continu | 15 V |
| Dimensions del producte | 1.97 "P x 4.33" W x 7.68" H |
| Pes de l'article | 2.86 lliures |
| Tipus de bateria | Ió de liti |
5. Configuració
5.1 Càrrega inicial
Before first use, fully charge the Andeman EP-177. Connect the provided charging cable to the Type-C input port on the device and to a suitable USB power adapter (not included). The device supports fast charging, reaching full capacity in approximately 1.8 hours. A 10-minute charge can provide enough power for an emergency jump start.
Image 5.1: Charging the Andeman EP-177 via its Type-C port.
5.2 Comprovació del nivell de la bateria
The device features a digital display indicating the battery power percentage. Ensure the device is adequately charged before use, especially for jump-starting vehicles.
6. Instruccions de funcionament
6.1 Arrencada amb salt d'un vehicle
- Pas 1: Insert the jumper cable into the jump starter's port. Ensure a secure connection.
- Pas 2: Connecteu el cl vermellamp al terminal positiu (+) de la bateria del vehicle i al cl negreamp al terminal negatiu (-) de la bateria del vehicle.
- Pas 3: Once the green indicator light on the jumper cable connector illuminates, start the vehicle.
- Pas 4: Un cop arrenqui el vehicle, traieu el cable pont clamps from the vehicle battery within 30 seconds, then disconnect the cable from the jump starter.
Image 6.1: Step-by-step guide for jump starting a vehicle.
6.2 Ús del compressor d'aire
- Pas 1: Press and hold the power button for 2 seconds to turn on the device. Short press to switch between on/pause.
- Pas 2: Choose the appropriate nozzle/needle and connect it to the inflatable tube, then attach to the item to be inflated.
- Pas 3: Short press the mode button to select the desired inflation mode (car, motorcycle, bicycle, ball). Use the "+" or "-" buttons to adjust the target pressure.
- Pas 4: Start inflation by short pressing the power button. The pump will stop automatically at the set pressure or when paused manually.
Nota: For continuous use, allow the compressor to rest for 10 minutes after every 10 minutes of operation to prevent overheating.
Image 6.2: The Andeman EP-177 functioning as a tire inflator.
6.3 Ús com a bateria externa
The device can charge various electronic devices via its USB-A (QC3.0), USB-B (5V/3A), and Type-C (5V/3A, 9V/2A, 12V/1.5A) output ports. Connect your device using a compatible charging cable.
Image 6.3: The Andeman EP-177 used as a power bank to charge various devices.
6.4 Ús de la llanterna LED
The integrated LED light offers three modes:
- Standard Lighting: Proporciona il·luminació contínua.
- Mode SOS: Emits an SOS signal for emergency situations.
- Mode d'alerta: Flashing light for increased visibility.
To activate or cycle through modes, press the dedicated flashlight button on the device.
Image 6.4: The Andeman EP-177's LED flashlight in use.
7. Precaucions de seguretat
Observeu les següents pautes de seguretat per evitar lesions o danys al dispositiu:
- Do not short-circuit the jump starter terminals.
- No exposeu el dispositiu a temperatures extremes (inferiors a -20 °C o superiors a 60 °C).
- No desmunteu el dispositiu.
- Mantenir fora de l'abast dels nens.
- Ensure proper polarity when connecting to a vehicle battery (red to positive, black to negative).
- Remove jumper cables within 30 seconds after the vehicle starts.
- Avoid prolonged continuous use of the air compressor to prevent overheating.
Imatge 7.1: acabatview of the 10 safety protections.
8. Manteniment
- Guardeu el dispositiu en un lloc fresc i sec, lluny de la llum solar directa.
- Charge the device at least once every 3-6 months to maintain battery health, even if not in use.
- Netejar l'exterior amb un d, suauamp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
- Assegureu-vos que tots els ports estiguin lliures de pols i deixalles.
9. Solució De Problemes
- El dispositiu no s'encén:
- Ensure the device is charged. Connect it to a power source and allow it to charge for a period.
- El vehicle no arrenca després de l'arrencada auxiliar:
- Check battery connections for proper polarity and secure contact. Ensure the jump starter has sufficient charge. The vehicle battery may be severely damaged or the vehicle may have other mechanical issues.
- Air compressor is not inflating:
- Verify that the nozzle is correctly attached and the target pressure is set. Check the device's battery level. Ensure the power button has been pressed to start inflation.
- Device is overheating:
- Stop operation immediately and allow the device to cool down. This is particularly important for the air compressor after extended use.
10. Garantia i Suport
For warranty information and customer support, please refer to the contact details provided in your product packaging or visit the official Andeman weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
