tectake WPC Click-System Tiles Instruction Manual

Seguretat general

• Llegiu atentament totes les instruccions abans de la instal·lació i l'ús.
• Mantingueu els nens i les mascotes allunyats de la zona d'instal·lació.
• Utilitzeu l'equip de protecció individual (EPI) adequat, com ara guants i ulleres de seguretat, durant la instal·lació.
• Do not use damaged tiles. Inspect all tiles before installation.

Surface Preparation Safety

• Ensure the installation surface is stable, level, and free from debris.
• Proper drainage is essential to prevent water accumulation under the tiles.

Eines necessàries (no incloses)

• Cinta mètrica
• Utility knife or saw (for cutting tiles, if necessary)
• Rubber mallet (optional, for securing clicks)
• Guants i ulleres de seguretat

Preparació de la superfície

1. Netegeu la superfície: Ensure the area where the tiles will be laid is clean, dry, and free of dirt, dust, and debris.
2. Anivellar la superfície: The surface must be as level as possible to ensure proper tile interlocking and stability. Minor irregularities can be tolerated, but significant slopes or depressions should be addressed.
3. Ensure Drainage: The underlying surface should allow for adequate water drainage to prevent pooling under the tiles, which can lead to mold or damage over time.

Passos d'instal·lació

1. Punt d'inici: Begin laying tiles from a corner of the area, working outwards. This helps maintain alignment.
2. Interlocking: Align the male (pins) and female (loops) connectors of two tiles. Gently press them together until they click into place. A rubber mallet can be used to lightly tap the edges for a secure fit.
3. Continue Laying: Continue connecting tiles in rows, ensuring each tile is firmly interlocked with its neighbors.
4. Cutting Tiles (if needed): For edges or irregular shapes, tiles can be cut using a utility knife or saw. Measure carefully before cutting.
5. Gap d'expansió: Leave a small expansion gap (approx. 1-2 cm) around fixed structures like walls or posts to allow for material expansion due to temperature changes.

Neteja regular

• Escombrat: Regularly sweep or vacuum the tiles to remove loose dirt, leaves, and debris.
• Rentat: For deeper cleaning, wash the tiles with water and a mild, non-abrasive detergent. A soft brush or mop can be used. Rinse thoroughly with clean water.
• Rentat a pressió: Low-pressure washing can be used, but avoid high-pressure settings that could damage the WPC material or dislodge tiles.

Eliminació de taques

• Address spills and stains promptly. Most common stains can be removed with soap and water.
• For stubborn stains, a specialized WPC cleaner may be used, following the manufacturer's instructions. Test on an inconspicuous area first.

Atenció estacional

• Hivern: While weather-resistant, remove heavy snow accumulation to prevent excessive weight. Avoid using metal shovels that could scratch the surface. Use plastic shovels or brushes.
• Algae/Moss: If algae or moss appears, clean with a suitable outdoor cleaner or a mixture of water and vinegar.