Manual d'instruccions del servomotor de la màquina de cosir industrial SMUDUKKIT de 550 W

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your SMUDUKKIT 550W Industrial Sewing Machine Servo Motor. This high-performance servo motor is designed for industrial sewing machines, offering energy efficiency, low noise, and precise speed control.

Característiques principals:

• Powerful & Efficient Performance: 550W high-torque servo motor for smooth and stable operation, ideal for high-speed and precision stitching.
• Energy-Saving & Eco-Friendly: Consumes up to 70% less electricity compared to traditional clutch motors.
• Ultra-Quiet & Low Vibration: Equipped with noise-reduction technology for a comfortable sewing experience.
• Adjustable Speed & Precision Control: Speed range from 200 to 4200 RPM for various sewing applications.
• Durable & Easy to Install: Constructed with high-quality components for long-lasting durability, compact and lightweight design for quick installation.

2. Contingut del paquet

Si us plau, verifiqueu que tots els components següents estiguin inclosos al vostre paquet:

• 550W Servo Motor
• Multi-function Speed Controller
• Integrated Aluminum Alloy Mounting Bracket
• Adjustable Treadle Rod
• Cinturó
• Installation Hardware (various bolts, nuts, washers, vibration dampeners)
• Clips de gestió de cables

Figura 2.1: Mésview of the SMUDUKKIT 550W Industrial Sewing Machine Servo Motor, including the motor unit, speed controller, and various accessories.

3. Configuració i instal·lació

Follow these steps to properly install your SMUDUKKIT 550W Servo Motor.

3.1. Motor to Bracket Assembly

1. Prepare the threaded L-bracket by threading one nut and a flat washer onto it.
2. Insert the L-bracket into the non-threaded hole on the motor's mounting bracket.
3. Attach the large bolt with a lock washer and flat washer on one side of the motor bracket. On the other side, use five washers as spacers.
4. Drop the fitting with a hole over the threaded L-bolt. Ensure the fastener is backed out enough to clear the bracket, then thread it into place.
5. On the threaded L-bolt, add a flat washer, lock washer, nut, and the protective end cap. This assembly allows for belt tension adjustment.
6. Tighten the large fastener just enough to compress the lock washer, allowing for bracket adjustment.

Figure 3.1: Close-up of the integrated aluminum alloy mounting bracket, designed for secure and stable motor installation.

3.2. Controller Connection

Connect the motor wires to the multi-function speed controller. Each fitting is uniquely sized to prevent incorrect connections.

1. Locate the six-pin connector from the motor and plug it into the corresponding port on the controller.
2. Locate the ten-pin connector from the motor and plug it into its corresponding port on the controller.
3. Slide the protective covers back into place over the connections.
4. An additional 110V outlet is available on the controller for connecting a sewing machine light, if desired.

Figure 3.2: The high-precision brushless speed controller, showing the digital display and control buttons.

3.3. Mounting to Sewing Machine Table

Secure the assembled motor and bracket to the underside of your sewing machine table.

1. Orient the carriage bolts and vibration dampeners with the small tab pointing downwards.
2. Start by installing two carriage bolts with dampeners to initially secure the motor bracket to the table.
3. Manually add the third carriage bolt to complete the installation.

3.4. Belt Installation and Tensioning

The motor comes standard with a 75mm pulley. Adjust the hardware on the L-bolt to achieve the correct belt tension for your sewing machine.

3.5. Gestió de cables

Use the provided wire management clips to secure all cables, keeping them clear of the rotating pulley and other moving parts to ensure safe operation.

4. Instruccions de funcionament

Familiarize yourself with the controller functions for optimal use.

4.1. Encendre/apagar

• Flip the red switch on the controller to the 'I' position to power on the motor.
• Flip the red switch to the 'O' position to power off the motor.

4.2. Ajust de velocitat

• Utilitza el + button to increase the motor speed (RPM).
• Utilitza el - button to decrease the motor speed (RPM).
• The digital display shows the current RPM setting. The minimum speed is 500 RPM, and the maximum speed is 4200 RPM.

4.3. Needle Position Control (If applicable)

• Premeu el botó N button to control the needle's up or down position, if your sewing machine is equipped with a compatible needle position sensor.

4.4. Rotation Direction

• Premeu el botó R button to change the direction of motor rotation to suit your specific sewing machine's requirements.

5. Manteniment

The SMUDUKKIT 550W Servo Motor is designed for minimal maintenance due to its brushless design.

• Neteja: Regularly wipe down the motor and controller with a dry, soft cloth to remove dust and debris. Ensure the motor's cooling fins are clear for optimal heat dissipation.
• Brushless Advantage: As a brushless motor, it does not have carbon brushes that wear out, contributing to a longer lifespan and reducing the need for frequent maintenance.
• Inspecció del cinturó: Periodically check the drive belt for wear, cracks, or proper tension. Adjust tension as needed using the L-bolt assembly.
• Comprovació de la connexió: Ensure all electrical connections remain secure and free from damage.

Figure 5.1: Illustrates the internal components of a brushless motor, highlighting its design for longevity and reduced maintenance.

6. Solució De Problemes

If you encounter issues with your SMUDUKKIT 550W Servo Motor, consider the following general troubleshooting steps:

• Sense energia: Ensure the power cord is securely plugged into a functional outlet and the controller's power switch is in the 'ON' position.
• El motor no funciona: Verify that all motor-to-controller connections are firm and correctly seated. Check the speed setting on the controller; ensure it's not set to 0 RPM.
• Incorrect Rotation: Use the 'R' button on the controller to adjust the rotation direction to match your sewing machine.
• Soroll/vibració inusuals: Check the drive belt for proper tension and alignment. Ensure all mounting hardware is securely tightened.
• Speed Inconsistency: Confirm that the speed settings on the controller are appropriate for your task.

Per a problemes persistents, poseu-vos en contacte amb l'atenció al client.

7. Especificacions

8. Garantia i Suport

For warranty information or technical support, please refer to the product packaging or contact SMUDUKKIT customer service directly. Keep your purchase receipt for any warranty claims.