Introducció
The KIMILAR 2024 Upgrade Anti-Theft Video Doorbell Mount is an innovative, no-drill mounting solution designed to securely hold your video doorbell. This bracket is engineered to prevent theft and ensure that your doorbell's motion sensor and night vision capabilities remain fully functional. Its design facilitates heat dissipation, contributing to the longevity of your device. It is ideal for various settings including homes, rentals, and offices, offering a secure and non-invasive installation method.
Image: The KIMILAR Anti-Theft Video Doorbell Mount securely installed on a door, showcasing its sleek design and how it encases a video doorbell.
Configuració i instal·lació
The KIMILAR Anti-Theft Video Doorbell Mount features a no-drill design for quick and easy installation without damaging your door or wall. Follow these steps for proper setup:
- Place Doorbell in Shell: Carefully insert your video doorbell into the main shell of the mount. Ensure the camera side is positioned correctly above the 1-slot.
- Coberta posterior segura: Push the back cover into place. If your doorbell shakes slightly, you may use the provided pads to ensure a snug fit.
- Fix Security Screw: Use the included screwdriver to fix the security screw at the bottom of the mount.
- Insert Metal Bracket: Insert the metal bracket into the main shell and fix it with the two PM4*8 screws.
- Install Thumb Screw and Gasket: Install the M5*50 thumb screw and place the gasket. This screw will secure the mount to your door.
- Attach to Door and Test: Position the mount on your door. Adjust the fixed clip to fit your door thickness. Do not overtighten the screws, as this might prevent the door from closing normally. Test the stability and functionality.
Image: Detailed six-step visual guide for installing the KIMILAR Anti-Theft Video Doorbell Mount.
Compatibilitat de portes
This doorbell mount is designed for inward-opening doors with specific dimensions:
- Gruix de la porta: Must range from 0.59 inches to 2.36 inches.
- Door Gap Width: Must be equal to or greater than 0.06 inches.
- Vora de la porta: The mount is not suitable for doors with uneven edges.
Image: Visual guide illustrating the required door thickness and gap for proper installation of the mount.
Funcions operatives
The KIMILAR Anti-Theft Video Doorbell Mount is engineered to enhance the functionality and security of your video doorbell.
Unobstructed Sensor Functionality
The mount features precisely drilled holes that align with the motion sensors and night vision sensors of compatible doorbells. This ensures that the mount does not interfere with your doorbell's ability to detect motion or function effectively in low-light conditions. The design also incorporates numerous mesh holes to facilitate optimal heat dissipation, which helps prolong the lifespan of your doorbell and maintains stable wireless and sound transmission.
Image: Illustration demonstrating how the KIMILAR mount ensures motion and night vision sensors remain unobstructed.
Disseny antirobatori
This mount provides a robust anti-theft solution, securely encasing your video doorbell to deter unauthorized removal. The secure fastening mechanism significantly reduces the risk of your wireless doorbell being stolen, offering peace of mind.
Image: A comparison highlighting the secure and stable installation of the KIMILAR mount against less secure or damaging alternative methods.
Compatibilitat
The mount is compatible with a variety of video doorbell models, including Ring Video Doorbell, Ring Video Doorbell 4 / 3 / 3 Plus / 2 / Video Doorbell (2020 Release), and Blink Video Doorbell. It accommodates doorbells with maximum dimensions of 2.55 inches in width, 5.11 inches in height, and 1.14 inches in depth.
Image: A visual representation of the KIMILAR mount's broad compatibility with popular video doorbell models.
Manteniment
To ensure the longevity and optimal performance of your KIMILAR Anti-Theft Video Doorbell Mount, follow these simple maintenance guidelines:
- Neteja: Periodically wipe the mount with a soft, damp cloth to remove dust and dirt. Avoid using abrasive cleaners or solvents, as these may damage the finish.
- Inspecció: Regularly check the security screw and the thumb screw to ensure they remain tight and secure. This will maintain the anti-theft integrity and stability of the mount.
- Consideracions ambientals: While designed for outdoor use, extreme weather conditions may affect the material over time. Ensure the mount is not subjected to excessive force or impact.
Resolució de problemes
If you encounter any issues with your KIMILAR Anti-Theft Video Doorbell Mount, refer to the following common problems and solutions:
| Problema | Possible causa/solució |
|---|---|
| Doorbell does not fit into the mount. | Verify your doorbell's dimensions. The mount accommodates doorbells up to 2.55" W, 5.11" H, and 1.14" D. Ensure it is a compatible model (e.g., Ring, Blink). |
| Motion sensor or night vision is blocked. | Ensure the doorbell is correctly seated within the mount, aligning its sensors with the precisely drilled holes. The mount is designed not to obstruct these functions. |
| Mount feels unstable or loose on the door. | Check that the door thickness is within the compatible range (0.59-2.36 inches) and the door gap is sufficient (>= 0.06 inches). Ensure all screws, especially the thumb screw, are tightened securely. |
| Door does not close properly after installation. | The thumb screw may be overtightened. Loosen it slightly to allow the door to close freely. Ensure the mount is not obstructing the door frame. |
| Mount is not suitable for my door type. | This mount is specifically designed for inward-opening doors with a flat, even edge. It is not compatible with outward-opening doors or doors with uneven edges. |
Especificacions
| Atribut | Detall |
|---|---|
| Fabricant | KIMILAR |
| Número de model | TTY2024-0416 |
| Número de part | TTY2024-0416 |
| Pes de l'article | 11.3 unces |
| Dimensions del paquet | 5.91 x 3.23 x 3.19 polzades |
| Color | Grey-grey |
| Necessites piles? | No |
| Compatible Doorbell Max Dimensions | 2.55 cm (amplada) x 5.11 cm (alçada) x 1.14 cm (profunditat) |
| Gruix de porta compatible | 0.59 polzades a 2.36 polzades |
| Compatible Door Gap Width | Equal to or greater than 0.06 inches |
Informació de la garantia
Specific warranty details for the KIMILAR 2024 Upgrade Anti-Theft Video Doorbell Mount are not provided within the product information. For warranty claims or detailed policy information, please refer to the manufacturer's official weblloc web o contacteu directament amb el seu servei d'atenció al client.
Atenció al client
For further assistance, technical support, or inquiries regarding your KIMILAR Anti-Theft Video Doorbell Mount, please visit the official KIMILAR store or contact their customer service department through the channels provided on their weblloc.
KIMILAR Store: Visit the KIMILAR Store on Amazon
