EPOMAKER Aula F108 Wireless Mechanical Keyboard User Manual

1. Introducció

The EPOMAKER Aula F108 is a full-size wireless mechanical gaming keyboard designed for versatility and performance. It features 108 hot-swappable and programmable keys, RGB backlighting, and multi-device compatibility across Mac, PC, and Android platforms. This manual provides detailed instructions for setting up, operating, and maintaining your keyboard.

2. Contingut del paquet

Assegureu-vos que tots els elements siguin presents al paquet:

• EPOMAKER Aula F108 Wireless Mechanical Keyboard
• Extractor de tecla i interruptor
• Manual d'usuari
• Cable USB-C a USB-A desmuntable
• Extra Mechanical Switches (4 pieces)
• Receptor USB de 2.4 GHz (emmagatzemat al teclat)

3. Configuració

3.1 Modes de connectivitat

The F108 keyboard supports three connectivity modes: 2.4GHz Wireless, Bluetooth (BT), and Wired (USB-C).

Connexió sense fil 3.1.1 de 2.4 GHz

1. Locate the 2.4GHz USB receiver stored in the slot on the back of the keyboard.
2. Connecteu el receptor USB a un port USB disponible de l'ordinador.
3. Toggle the switch on the back of the keyboard to the "2.4G" position.
4. The keyboard should automatically connect. The RGB light strip indicator will confirm connection.

3.1.2 Bluetooth (BT) Connection

1. Toggle the switch on the back of the keyboard to the "BT" position.
2. Manteniu premut el botó FN + 1, FN + 2, o FN + 3 key combination for 3 seconds to enter pairing mode. The corresponding key's backlight will flash quickly.
3. On your device (PC, Mac, Android), search for Bluetooth devices and select "AULA F108" or similar.
4. Once connected, the backlight of the selected key will turn off after 2 seconds.
5. The keyboard can store up to 3 Bluetooth profiles. Switch between them using FN + 1, FN + 2, o FN + 3.

3.1.3 Connexió USB-C amb cable

1. Connect the provided USB-C cable to the keyboard's Type-C port.
2. Connecteu l'extrem USB-A del cable a un port USB disponible de l'ordinador.
3. Toggle the switch on the back of the keyboard to the "Wired" position.
4. El teclat funcionarà com un dispositiu amb cable i es carregarà simultàniament.

3.2 Informació sobre la bateria

The EPOMAKER Aula F108 is equipped with a 4000mAh rechargeable battery. The battery life can last up to 100 hours with the backlight off, and approximately 10 hours with RGB backlight on. The keyboard charges via the USB-C port.

4. Instruccions de funcionament

4.1 Key Functions and Combinations

The F108 is a full-size 108-key keyboard with anti-ghosting capabilities, allowing for accurate and simultaneous input. Many functions are accessible via the FN combinacions de tecles.

4.2 Control de retroiluminació RGB

The keyboard features per-key RGB lighting and side RGB strips. You can customize lighting modes, colors, saturation, brightness, and dynamic patterns.

• FN + \ |: Cycle through various RGB lighting effects.
• FN + ↑ / ↓: Ajusteu la brillantor de la llum de fons.
• FN + ← / →: Ajusta la velocitat de la retroiluminació.
• FN + Z/X/C: Change backlight color (specific modes).
• FN + Spacebar: Reset RGB lighting to default.

4.3 Programmable Keys and Software

The F108 keyboard is fully programmable. Utilize the dedicated software to remap keys, assign macros, and adjust sensitivity for enhanced input speed and gaming competitiveness. Nota: Mac software may not be available.

The software allows for:

• Reasignació de claus
• Enregistrament macro
• Efectes de llum personalitzats
• System Settings adjustments
• Music Rhythm synchronization

4.4 Ergonomia

El teclat té 2-stage kickstand and a low front height with Cherry profile keycaps to reduce finger fatigue and wrist strain during extended use.

5. Manteniment

5.1 Neteja

Regularly clean your keyboard to ensure optimal performance and longevity. Use a soft, dry cloth to wipe down the keycaps and chassis. For deeper cleaning, use the provided keycap puller to remove keycaps and clean underneath with compressed air or a brush.

5.2 Switch Replacement (Hot-Swappable)

The F108 is hot-swappable, allowing you to easily change 3/5-pin mechanical switches without soldering. Use the provided switch puller to carefully remove switches. Insert new switches by aligning the pins with the sockets and pressing gently until they click into place.

6. Solució De Problemes

6.1 Problemes de connectivitat

• Keyboard not connecting via 2.4GHz: Ensure the USB receiver is securely plugged in and the keyboard switch is set to "2.4G". Try a different USB port.
• Error d'emparellament Bluetooth: Ensure the keyboard is in pairing mode (FN + 1/2/3 for 3 seconds). Check your device's Bluetooth settings and try re-pairing. Ensure no other devices are interfering.
• La connexió per cable no funciona: Verify the USB-C cable is properly connected to both the keyboard and the computer. Ensure the keyboard switch is set to "Wired". Try a different USB-C cable or port.

6.2 Problemes d'il·luminació

• La retroiluminació no s'encén: Ensure the keyboard is powered on and not in sleep mode. Adjust brightness using FN + ↑.
• Il·luminació inconsistent: Check for software conflicts or try resetting the RGB lighting to default (FN + Spacebar).

6.3 Key Response Issues

• Les tecles no responen: Check if the keyboard is properly connected. For hot-swappable switches, ensure the switch is fully seated in its socket. Try replacing the switch with one of the spares.
• Double typing or missed inputs: This could be due to switch issues. Try replacing the problematic switch.

6.4 Restabliment de fàbrica

If you encounter persistent issues, a factory reset may resolve them. Refer to the programming software for the factory reset option or consult the quick operation guide included in the package.

7. Especificacions

8. Garantia i assistència

For warranty information, technical support, or further assistance, please visit the official EPOMAKER store or contact their customer service. You can find more information at the EPOMAKER Store on Amazon.

9. Recursos addicionals

9.1 Vídeos oficials de productes