CYCLAMI RT02 Bike Radar Tail Light User Manual

Introducció

The CYCLAMI RT02 Bike Radar Tail Light is designed to enhance cycling safety by providing real-time detection of approaching vehicles from behind. Featuring 24GHz millimeter-wave radar technology, active alerts, brake sensing, and multiple lighting modes, this device offers comprehensive protection for various cycling conditions.

Informació de seguretat

• Always ensure the tail light is securely mounted and fully charged before each ride.
• The radar system is an aid and should not replace visual awareness and safe cycling practices.
• Regularly check the device for any damage or malfunctions.
• Do not look directly into the light when it is active to avoid eye strain.
• Mantenir fora de l'abast dels nens.

Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• Bike Tail Light (1)
• Seatpost Mount (1)
• Saddle Rail Mount (1)
• Cable de càrrega USB-C (1)
• Manual d'usuari (1)

Producte acabatview

The CYCLAMI RT02 integrates a 24GHz radar sensor with a high-visibility tail light. Key features include:

• 24GHz Millimeter-Wave Radar: Detects vehicles up to 60 meters away with a 54° wide-angle.
• Active Alert System: Provides dual-tone audio warnings (1 beep at 60m, 2 beeps at 10m) and rapid light flashes for approaching vehicles.
• Detecció de frens: Automatically activates an ultra-bright red light during sudden stops.
• Group Riding Mode: Filters out same-speed teammates to prevent false alerts.
• Múltiples modes d'il·luminació: Five modes available: Steady, Fast Flash, Slow Flash, Breath, and SOS.
• Llarga vida útil de la bateria: 1000mAh battery provides 3-6 hours runtime, USB-C rechargeable.
• Vibration Wake-Up: Power-saving feature that activates the device only when motion is detected.
• Construcció duradora: IP64 waterproof aluminum alloy + PC shell.

Imatge: Superior i inferior view of the CYCLAMI RT02 Radar Tail Light, highlighting its compact design and control buttons.

Configuració i instal·lació

The RT02 offers dual installation options for versatility.

1. Seatpost Mount Installation

1. Attach the seatpost mount to your bicycle's seatpost using the provided straps or bands. Ensure it is tight and stable.
2. Slide the RT02 tail light onto the mount until it clicks securely into place.
3. Adjust the angle so the light faces directly backward and the radar has an unobstructed view.

2. Saddle Rail Mount Installation

1. Secure the saddle rail mount to the rails under your bicycle saddle.
2. Slide the RT02 tail light onto the mount until it locks.
3. Verify the light is horizontal and facing directly backward.

Image: The CYCLAMI RT02 Radar Tail Light installed on a bicycle, demonstrating its low-profile i ajust segur.

Instruccions de funcionament

Encès/Apagat

• To power on, press and hold the power button for 2 seconds. The light will illuminate.
• To power off, press and hold the power button for 2 seconds. The light will turn off.

Selecció del mode

Short press the power button to cycle through the 5 available lighting modes: Steady, Fast Flash, Slow Flash, Breath, and SOS.

Funcionalitat del radar

The 24GHz radar continuously monitors for vehicles approaching from behind within a 60-meter range and 54° angle.

• Alertes d'àudio: A single beep sounds when a vehicle is detected at approximately 60 meters. Two rapid beeps sound when the vehicle is within 10 meters.
• Alertes visuals: The tail light will flash rapidly to alert the rider and the approaching vehicle.
• Group Riding Mode: This mode intelligently filters out other cyclists riding at similar speeds, reducing unnecessary alerts during group rides.

Image: Illustration of the radar active warning system, showing a cyclist and an approaching vehicle with radar detection range.

Brake Sensing

The integrated high-precision brake sensor detects sudden deceleration. Upon braking, the tail light automatically switches to an ultra-bright red light to signal to vehicles behind you.

Vibration Wake-Up

To conserve battery, the device enters a dormant state after 30 seconds of inactivity. It automatically wakes up and resumes operation when vibration (motion) is detected, such as when you start riding.

Carregant

The CYCLAMI RT02 is equipped with a 1000mAh rechargeable battery.

• Connect the provided USB-C cable to the charging port on the device and to a standard USB power source (e.g., computer, wall adapter).
• Una càrrega completa sol trigar aproximadament 2 hores.
• El llum indicador mostrarà l'estat de càrrega (per exemple, vermell per a la càrrega, verd per a la càrrega completa).

Manteniment

• Clean the lens and radar sensor regularly with a soft, damp tela per garantir un rendiment òptim.
• Eviteu utilitzar netejadors abrasius o dissolvents.
• Guardeu el dispositiu en un lloc fresc i sec quan no l'utilitzeu.
• Ensure the USB-C port cover is securely closed to maintain IP64 water resistance.

Resolució de problemes

Especificacions

• Nom del model: RT02-US
• Freqüència del radar: 24 GHz
• Radar Detection Range: Fins a 60 metres
• Radar Detection Angle: 54°
• Visibilitat: 500 m
• Capacitat de la bateria: 1000 mAh
• Port de càrrega: USB-C
• Temps de càrrega: Aproximadament 2 hores
• Temps d'execució: 3-6 hores (segons el mode)
• Classificació impermeable: IP64
• Material: Aliatge d'alumini + PC
• Pes de l'article: 54 grams
• Dimensions: 2.44" x 1.65" x 0.94" (approximate, based on feature bullets)

Garantia i Suport

The CYCLAMI RT02 Bike Radar Tail Light comes with a 1 any de garantia from the date of purchase. For technical support, warranty claims, or any inquiries, please contact the seller, SoRider, or CYCLAMI customer support.

Seller: SoRider

Please refer to your purchase documentation for specific contact details or visit the official CYCLAMI weblloc per obtenir més ajuda.

Vídeos de productes