SINGCALL Wireless Doorbell Extender & Portable Receiver User Manual

1. Introducció

The SINGCALL Wireless Doorbell Extender converts your existing wired doorbell into a wireless system, allowing you to hear your doorbell from anywhere in your home with a portable receiver. This system enhances convenience by extending your doorbell's reach without complex rewiring. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure optimal performance of your device.

2. Contingut del paquet

Si us plau, verifiqueu que tots els elements siguin presents al vostre paquet:

• 1x Wireless Doorbell Extender (Transmitter)
• 1x Wireless Portable Receiver
• Accessoris de muntatge (cargols, cinta adhesiva)
• 1x Manual d'usuari (aquest document)

3. Característiques del producte

• Wired to Wireless Conversion: Seamlessly upgrades traditional wired doorbells to a wireless system without requiring new wiring.
• Multiple Ringtones & Adjustable Volume: Offers 32 distinct ringtones and a volume range from 0-100dB. Different ringtones can be set per transmitter.
• Interval de senyal ampliat: Provides stable signal transmission up to 100 meters (328 feet) in open areas.
• Easy Installation & Broad Compatibility: Designed for straightforward installation. Power cables can be connected in either orientation. Operates with a voltage range of 3-24V. Compatible with most mechanical and wired doorbells. A transformer is required if the voltage supera els 24 V.
• Sistema ampliable: Supports operation with multiple transmitters (e.g., front and rear doors) and can be expanded up to 20 units.
• Portable Receiver: Features a Type-C rechargeable battery and replaceable back panels for wall-mounting or portable use with a belt clip.

4. Configuració i instal·lació

4.1 Connecting the Doorbell Extender (Transmitter)

The doorbell extender connects to your existing wired doorbell chime. Follow these steps:

1. Open the Circuit Board Cover: Carefully open the cover of your existing wired doorbell chime to access its internal wiring.
2. Connecteu el cable d'alimentació: Connect the power cord of the doorbell extender to the circuit board terminals. The power cables can be connected in either direction (+/-).
3. Secure the Transmitter: Use the provided adhesive tape to secure the transmitter within the chime housing to prevent loosening.
4. Tanca la coberta: Ensure all connections are secure and close the doorbell chime cover.

Nota: If your transformer and wired doorbell are integrated, the transmitter cannot be used simultaneously with the existing wired doorbell chime.

Figure 1: Doorbell Extender Connection Diagram

Figure 2: Fast Installation Steps

Figure 3: Transmitter Wiring Diagram

4.2 Pairing the Extender with the Portable Receiver

To enable communication between the extender and the receiver, they must be paired:

1. Activa el mode d'aprenentatge: On the portable receiver, long press the Volume button. The blue LED indicator will stay on steadily, indicating it has entered learning mode.
2. Trigger the Doorbell: Press your wired doorbell button. The receiver will beep twice, and its blue LED indicator will flash twice. This confirms successful pairing.

5. Instruccions de funcionament

5.1 Ajust del volum

The portable receiver offers adjustable volume levels:

• Canvia el volum: Short press the Volume Control button on the side of the receiver to cycle through different volume levels (0-100dB).
• Volume Limits: The receiver will beep twice when the maximum or minimum volume level is reached.
• Cicle d'alimentació: If the receiver is powered off and then on again, the volume will automatically return to its maximum level.

5.2 Canviar els tons de trucada

The portable receiver has 32 selectable ringtones:

• Seleccioneu el to de trucada: Short press the Music Select (Up/Down) buttons on the side of the receiver to browse and choose different ringtones.

Figure 4: Portable Receiver Features (showing buttons for volume and music select)

Figure 5: Wireless Range Illustration

6. Manteniment

• Neteja: Wipe the devices with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Càrrega de la bateria: The portable receiver is equipped with a built-in rechargeable Lithium Polymer battery. Charge it using a standard Type-C USB cable when the battery is low.
• Condicions ambientals: Keep the devices dry and away from extreme temperatures.

7. Solució De Problemes

• No Chime from Receiver:
  • Ensure the portable receiver is powered on and charged.
  • Verify that the doorbell extender is correctly wired to your existing doorbell chime.
  • Check if the receiver and extender are properly paired (refer to Section 4.2).
  • Confirm the receiver is within the operational range of the extender. Obstacles like thick walls can reduce range.
• Volume Too Low or High:
  • Adjust the volume using the Volume Control button on the portable receiver (refer to Section 5.1).
• Cannot Pair Extender and Receiver:
  • Assegureu-vos que els dos dispositius estiguin encès.
  • Repeat the pairing process carefully as described in Section 4.2.
  • If issues persist, try resetting the receiver to factory defaults before re-pairing.

7.1 Restabliment dels valors predeterminats de fàbrica

To delete all paired transmitters and restore the receiver to its original settings:

1. Turn Off Receiver: Switch the power button on the back of the receiver to the OFF position.
2. Inicia el restabliment: While holding down the Volume Control button, switch the power button to the ON position.
3. Confirmació: The receiver will beep ten times slowly, and the LED light will flash rapidly. This indicates that the ringtone has returned to the first one, and all transmitters have been successfully deleted. The receiver is now back to factory defaults.

8. Especificacions

9. Garantia i Suport

SINGCALL products are designed for reliability and performance. This product is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the documentation included with your purchase or contact SINGCALL customer service.

For technical support, troubleshooting assistance, or any inquiries regarding your SINGCALL Wireless Doorbell Extender and Portable Receiver, please visit the official SINGCALL website or contact their customer service department directly. Contact information can typically be found on the product packaging or the brand's official online store.