HAARAY JY2423

HAARAY Solar Security Light Model JY2423 Instruction Manual

Model: JY2423

1. Introducció

Thank you for choosing the HAARAY Solar Security Light Model JY2423. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new solar-powered security light. Please read these instructions thoroughly before use and retain them for future reference.

2. Informació de seguretat

  • Ensure the solar panel is installed in a location that receives direct sunlight for at least 6-8 hours daily to maximize charging efficiency.
  • Do not disassemble, modify, or attempt to repair the product yourself. Contact qualified personnel for service.
  • Mantingueu el producte allunyat del foc o de temperatures elevades.
  • Avoid direct eye exposure to the light source, as it is very bright.
  • Elimineu les piles i els components electrònics d'acord amb la normativa local.
  • This product is IP65 waterproof, suitable for outdoor use, but avoid submerging it in water.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de la instal·lació:

  • Solar Security Light (with dual adjustable heads and motion sensor) x 1
  • Solar Panel with 16.4ft Cable x 1
  • Mounting Hardware (Wall Plugs x 8, Screws x 8, Wall Brackets x 2)
  • Manual d'instruccions x 1
Diagram showing the components included in the package: solar light, solar panel, wall plugs, screws, and wall brackets.

Figure 3.1: Package Contents and Easy Installation Diagram

4. Producte acabatview

4.1 Característiques clau

  • Energia solar: Energy-efficient charging via a high-efficiency polycrystalline silicon solar panel.
  • Sensor de moviment: High-sensitivity motion detection with a 120° detection angle and up to 39 feet range.
  • Capçals dobles ajustables: Two rotatable light heads provide wide and customizable illumination coverage.
  • Disseny separable: LED panels and solar panel are separable with a 16.4ft cable for flexible installation indoors or outdoors.
  • 3 modes d'il·luminació: Offers two motion-activated modes and one stay-on mode for varied lighting needs.
  • Temporitzador ajustable: Lighting duration can be set from 5 seconds to 1 minute.
  • Day/Night Sensor: Adjustable knob to select operation during night only or day and night.
  • Construcció duradora: IP65 waterproof rating, frost-resistant, and heat-resistant ABS material for reliable performance in various weather conditions.

4.2 Components

HAARAY Solar Security Light with two adjustable light heads, a motion sensor, and a separate solar panel connected by a 16.4ft cable.

Figura 4.1: Producte principal View - Solar Security Light and Solar Panel

Diagram illustrating heat dissipation fins on the back of the light heads.

Figure 4.2: High-Efficiency Heat Dissipation Design

Diagram showing layers of a polycrystalline silicon solar panel with charging time and conversion rate details.

Figure 4.3: Polycrystalline Silicon Solar Panel Technology

5. Instal·lació

The HAARAY Solar Security Light is designed for easy installation. Follow these steps:

  1. Trieu una ubicació: Select a mounting location for the solar panel that receives maximum direct sunlight throughout the day (6-8 hours recommended). The light unit can be installed separately, up to 16.4 feet away from the solar panel, thanks to the extended cable.
  2. Muntar el panell solar: Use the provided wall brackets, screws, and wall plugs to securely mount the solar panel. Adjust its angle to face the sun directly.
  3. Muntar la unitat de llum: Attach the light unit to your desired location (wall, fence, etc.) using the remaining mounting hardware. Ensure the motion sensor is positioned to cover the desired detection area.
  4. Connecteu el cable: Connect the 16.4ft cable from the solar panel to the light unit. Ensure the connection is secure.
  5. Ajustar els capçals de llum: Manually adjust the two light heads to direct illumination where needed. Each head can be rotated 90 degrees vertically and 180 degrees horizontally.
Diagram showing the separable solar panel and light unit connected by a 16.4ft cable, with installation examples indoors and outdoors.

Figure 5.1: Separable Design for Flexible Installation

Diagram illustrating the adjustable dual light heads with 90-degree vertical and 180-degree horizontal rotation, and motion sensor detection angle and distance.

Figure 5.2: Adjustable Dual Heads and Motion Detection Area

6. Instruccions de funcionament

The light unit features a Day/Night knob and a Timer knob for customization.

6.1 Day/Night Knob Adjustment

This knob controls when the motion sensor activates the light:

  • Icona del sol: The sensor will activate the light during both day and night when movement is detected.
  • Moon Icon: The sensor will activate the light only at dusk or night when movement is detected.
Diagram showing the Day/Night knob settings: one for working during day and night, and another for working only at dusk or night.

Figure 6.1: Day/Night Knob Settings

6.2 Timer Knob Adjustment

The Timer knob adjusts how long the light stays on after motion is detected. It can be set from 5 seconds to 60 seconds.

  • Rotate towards '-' for shorter duration (minimum 5 seconds).
  • Rotate towards '+' for longer duration (maximum 60 seconds).
Diagram showing the Timer knob and its adjustment range from 5 to 60 seconds.

Figure 6.2: Timer Knob Adjustment

6.3 modes d'il·luminació

The HAARAY Solar Security Light offers three distinct lighting modes:

  1. Mode 1 (Motion Activated - Bright): The light remains OFF until motion is detected. Upon detection, it illuminates at 100% brightness and turns OFF approximately 25 seconds after no further motion is detected.
  2. Illustration of Mode 1: Light is off, turns on to 100% brightness when motion is detected, then turns off again.

    Figure 6.3: Mode 1 Operation

  3. Mode 2 (Stay On All Night): The light remains at 30% brightness continuously throughout the night, regardless of motion detection.
  4. Illustration of Mode 2: Light stays on at 30% brightness all night.

    Figure 6.4: Mode 2 Operation

  5. Mode 3 (Dim to Bright Motion Activated): The light stays on at 10% brightness. When motion is detected, it switches to 100% brightness and returns to 10% brightness approximately 25 seconds after no further motion is detected.
  6. Illustration of Mode 3: Light is dim, brightens to 100% when motion is detected, then returns to dim.

    Figure 6.5: Mode 3 Operation

7. Manteniment

  • Netegeu el panell solar: Netegeu regularment el panell solar amb un drap suau iamp drap per eliminar la pols, la brutícia o les restes. Un panell net garanteix una eficiència de càrrega òptima.
  • Inspeccionar connexions: Periodically check the cable connection between the solar panel and the light unit to ensure it remains secure and free from damage.
  • Elimina les obstruccions: Ensure no trees, buildings, or other objects obstruct direct sunlight from reaching the solar panel.
  • Cura de la bateria: The internal battery is designed for long-term use. If the light's performance significantly degrades over time, it may indicate the battery needs replacement by a qualified technician.
HAARAY Solar Security Light operating in rainy weather, demonstrating its IP65 waterproof, frost-resistant, and heat-resistant features.

Figure 7.1: Weather Resistance of the Solar Security Light

8. Solució De Problemes

ProblemaCausa possibleSolució
La llum no s'encén a la nit.
  • Càrrega insuficient dels panells solars.
  • Day/Night knob set incorrectly.
  • Sensor de moviment obstruït o defectuós.
  • Ensure solar panel receives 6-8 hours of direct sunlight daily. Clean the panel.
  • Adjust the Day/Night knob to the 'Moon' icon for night-only operation.
  • Check for obstructions in front of the motion sensor.
Light stays on continuously or flashes.
  • Continuous motion in detection area.
  • Light sensor interference.
  • Relocate the light or adjust the sensor angle to avoid constant triggers.
  • Ensure no other light sources are directly shining on the light sensor.
L'abast del sensor de moviment és deficient.
  • Obstructions in detection path.
  • Sensor angle incorrect.
  • Clear any objects blocking the sensor's view.
  • Adjust the motion sensor's angle to optimize coverage.

9. Especificacions

CaracterísticaDetall
MarcaHARAY
Número de modelJY2423
MaterialAcrilonitril butadiè estirè (ABS)
Color clarBlanc (7000 K)
Font d'alimentacióEnergia solar
Angle de detecció de moviment120°
Interval de detecció de movimentFins a 39 peus
Cable Length (Solar Panel to Light)16.4 peus
Adjustable Lighting Time5 segons a 60 segons
Classificació de resistència a l'aiguaIP65
Bateria1 D battery (included)
Dimensions del producte5 cm de llargada x 6 cm d'amplada x 7 cm d'alçada (aproximadament)
Pes de l'article16 unces (1 lliura)

10. Garantia i Suport

HAARAY products come with an extended warranty. For specific warranty details, please refer to the warranty card included in your package or contact HAARAY customer support.

If you encounter any issues or have questions regarding your HAARAY Solar Security Light, please contact our customer support team:

  • Assistència en línia: Visit the official HAARAY store on Amazon: HAARAY Amazon Store
  • Suport per correu electrònic: Refer to your product packaging or warranty card for direct email contact information.

Please have your model number (JY2423) and purchase date ready when contacting support.

Documents relacionats - JY2423

Preview Llum solar de moviment LED HAARAY: instruccions, especificacions i resolució de problemes
Guia completa per al llum solar de moviment LED HAARAY 208, que cobreix la instal·lació, els modes d'ús, les especificacions del producte, les precaucions de seguretat i l'anàlisi d'errors.