Patiowell 8x10 ft Outdoor Resin Storage Shed Instruction Manual

Introducció

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Patiowell 8x10 ft Outdoor Resin Storage Shed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Informació de seguretat

• Always inspect the product and all components upon receipt.
• Seguiu atentament les instruccions de muntatge.
• Wear appropriate safety gear, including work gloves, eye protection, and long sleeves, when handling components or performing maintenance.
• Mantingueu els nens i les mascotes allunyats de la zona de reunió.
• Do not attempt assembly on days with strong winds or low temperatures.
• Do not exceed the weight capacity of the shed.
• Regularly inspect the shed for any signs of damage or wear and tear.

Eines necessàries

Es necessiten les següents eines per al muntatge:

• Trepant
• Escala
• Tornavís
• Clau hexagonal (clau Allen)
• Clau anglesa
• Guants de treball
• Ulleres de seguretat

It is recommended to use a clean work surface to spread out parts and for pre-assembly steps. Review all instructions before you begin.

Llista de peces

Before starting assembly, remove all pieces from the packages and spread them out on the ground. Check the type and quantity of parts against the provided parts drawing. Please prepare these components in advance at the beginning of each stage.

(Refer to the detailed parts drawing in the assembly video for specific component identification and quantities.)

Instruccions de muntatge

1. Preparació del lloc

Ensure the ground surface is level. It is recommended to construct a wooden or concrete base as a foundation. Measure the ground with a tool to confirm it is level before installation.

Video: Patiowell 10x10 FT Large Storage Shed Installation Video - This video demonstrates site preparation and assembly steps.

2. Instal·lació de la base

Assemble the base panels (A1, A2, A3, 10-A6, 10-A7, A4, A5) by interlocking them and securing with screws (SPF6-20, SF4-15). Ensure all connections are firm and the base is stable.

Image: The fully assembled Patiowell 8x10 ft Outdoor Resin Storage Shed.

3. Instal·lació de paret

Install the wall panels (10-B1, 10-B2, 10-B3, 10-B5, 10-B7, 10-B8, 10-B9, B4, B6) in the specified order, ensuring the arrow direction is noted for proper alignment. Secure panels with screws (SP6-15) and connect vertical supports (B2-1, B2-2, B2-3, B2-4, 10-B2-5, 10-B2-6) using M6/M6-10 screws.

Image: The Patiowell 8x10 ft Outdoor Resin Storage Shed with its double doors open, revealing the spacious interior.

4. Instal·lació de ventilació

Install the vent components (E3, CRI, CLI) onto the triangular panels. Ensure proper fit and secure with screws (SP6-15).

5. Roof Beam/Wall Frame Installation

Assemble the roof beams (10-D2-3, D2-4, 10-D2-8) and wall frames (E1-1, E2-1) using M6/M6-15 and M6/M6-55 screws. Ensure E1-1 and E2-1 are snapped into their corresponding positions before installing screws.

6. Instal·lació de panells de teulada

Place the assembled triangular panels (10-CL, 10-CR, 10-CL-1, 10-CR-1) onto the corresponding positions of the wall panels. Install the remaining two triangular panels in turn. After placing the D1 and D3 panels, align them with the grooves of the triangular panels and push them forward. Secure with screws (SP6-20, SP6-35). Ensure D4 fits perfectly on the tripod.

Imatge: Un costat view of the Patiowell 8x10 ft Outdoor Resin Storage Shed, highlighting its robust construction.

7. Instal·lació de la porta

Install the door components (DL-1, DL-2, DR-1, DR-2, DZ, DG) and secure them. Push DZ completely down, ensuring the bottom surface is level. Two people are needed for door installation: one person closes the door and inserts the pin, while the other adjusts the gap outside the door. After making sure the gap is even, the person inside installs DDZ screws (SP6-20).

Image: The Patiowell 8x10 ft Outdoor Resin Storage Shed with its double doors closed and secured.

Característiques del producte

• Materials duradors: Constructed from recyclable high-density resin, offering enhanced stability and impact resistance.
• Muntatge simplificat: Features a design with fewer screws and interlocking panels for quicker installation.
• Protecció contra totes les inclemències del temps: Sloped roof design and plastic floor base prevent water pooling and resist moisture. UV-resistant resin walls protect contents from weather elements.
• Interior espaiós: Dimensions of 66.1 inches deep x 91.3 inches wide x 94.5 inches high provide ample storage for various outdoor items.
• Ventilació i il·luminació: Equipped with vents and side windows to ensure air circulation and natural light.
• Seguretat: Features lockable doors to safeguard stored items.

Especificacions

Garantia i Suport

If you encounter any quality problems or require assistance with your Patiowell storage shed, please contact us directly. Our customer service team is available to help you.

Contacte: saleservice@madepot.com

Do not return your unit to the store without contacting us first.