Producte acabatview
The Phanteks Glacier One 360D30 X2 AIO Liquid CPU Cooler is a high-performance all-in-one liquid cooling solution designed for efficient heat dissipation from central processing units. It features an integrated pump and radiator with three D30-120 D-RGB fans, optimized for both cooling performance and aesthetic appeal.
Les característiques clau inclouen:
- High-performance cooling solution designed for gamers and PC enthusiasts.
- Equipped with D30 fans that can interconnect into a single frame for easier cable management.
- A large copper base and fin array ensures efficient cooling for high-end CPUs.
- Maximum clearance design for compatibility with motherboard and RAM components.
- Evolv X2-design aluminum pump cover with integrated fan cools surrounding VRMs and M.2 SSD.
- Supports Intel LGA 1700, 1200, 115x, and AMD AM4, AM5 sockets.
Image: The Phanteks Glacier One 360D30 X2 AIO Liquid CPU Cooler, showcasing the radiator with three D-RGB fans and the pump block.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació.
- Glacier One 360D30 X2 AIO Liquid CPU Cooler (PH-GO360D30_Dxx02)
- Mounting hardware for Intel sockets (LGA 115x, 1200, 1700, 1851)
- Mounting hardware for AMD sockets (AM4, AM5)
- 3x Tube clips
- Thermal paste (pre-applied + Phanteks PH-NDC)
- Manual d'usuari (aquest document)
Configuració i instal·lació
This section provides step-by-step instructions for installing the Glacier One 360D30 X2 AIO Liquid CPU Cooler. Ensure your system is powered off and unplugged before proceeding.
1. Prepareu la placa base
Identify the correct backplate and standoffs for your CPU socket (Intel or AMD). Secure the backplate to the motherboard from the rear, aligning it with the CPU cooler mounting holes.
Image: Illustration showing the cooler installed in a PC case, highlighting compatibility with Intel and AMD sockets and clearance for motherboard and RAM components.
2. Instal·leu el radiador i els ventiladors
Mount the radiator to an available fan mounting location in your PC case (e.g., top, front, or rear). The D30 fans are designed to interconnect, simplifying their installation and cable management. Use the provided screws to secure the radiator and fans.
Imatge: Primer pla view of the D30 fans, demonstrating their linking system with bridge connectors and screw cover plates to reduce visible cables.
Image: Vertical orientation of the Phanteks Glacier One 360D30 X2 AIO Liquid CPU Cooler, showing the radiator and pump block.
3. Mount the Pump Block
Ensure the pre-applied thermal paste on the copper cold plate is intact. If not, apply a small amount of the included Phanteks PH-NDC thermal paste to the center of your CPU's integrated heat spreader (IHS). Carefully place the pump block onto the CPU, aligning the mounting holes with the standoffs. Secure the pump block using the provided thumb screws or nuts, tightening them in a cross pattern until snug.
Image: Diagram illustrating the pump block's cooling effect on the CPU, VRM, and M.2 SSD, emphasizing the large copper base and integrated fan.
4. Gestió de cables
Connect the pump's 3-pin DC cable to an available fan header on your motherboard (typically labeled "PUMP_FAN" or "CPU_OPT"). Connect the D-RGB PWM Pump Fan 6-pin cable to the appropriate D-RGB header on your motherboard or a compatible D-RGB controller. Utilize the included tube clips to guide the tubing and fan cables for a clean setup.
Imatge: View of the D30-120 fans installed, showcasing their integrated D-RGB lighting with an infinity mirror hub.
Image: The cooler installed within a PC case, demonstrating its aesthetic integration with other Phanteks Evolv X2 and NexLinq products.
Instruccions de funcionament
Once installed, the Glacier One 360D30 X2 AIO Liquid CPU Cooler operates automatically, controlled by your motherboard's fan and pump headers. Ensure your motherboard's BIOS/UEFI settings are configured to manage fan speeds based on CPU temperature for optimal performance and noise levels.
D-RGB Lighting Control
The D-RGB lighting can be controlled via compatible motherboard software (if connected to a D-RGB header) or through a dedicated Phanteks D-RGB controller (sold separately). Refer to your motherboard's manual or the Phanteks website for specific software instructions.
Manteniment
Regular maintenance ensures optimal performance and longevity of your AIO cooler.
- Eliminació de pols: Periodically clean dust from the radiator fins and fans using compressed air. Ensure the fans are not spinning during cleaning to prevent damage.
- Inspecció de tubs: Visually inspect the tubing for any signs of kinks, leaks, or damage.
- Pales de ventilador: Gently wipe fan blades with a soft, dry cloth if dust accumulation is visible.
- Refrigerant: The AIO cooler is a closed-loop system and does not require coolant refills or maintenance.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Temperatures altes de la CPU | Improper pump block mounting; insufficient thermal paste; dust accumulation on radiator; fans not spinning. | Re-seat pump block, reapply thermal paste; clean radiator and fans; check fan connections and BIOS settings. |
| Fans Not Spinning / D-RGB Not Lighting Up | Loose cable connections; incorrect header connection; software/driver issue. | Verify all power and D-RGB cables are securely connected to the correct headers; update motherboard BIOS/drivers; check D-RGB software settings. |
| Soroll inusual de la bomba/ventiladors | Air bubbles in loop (pump); fan bearing noise; fan hitting cables. | Orient radiator higher than pump (if possible) to allow air to settle; check for cable interference with fans; if noise persists, contact support. |
Especificacions
| Component | Especificació |
|---|---|
| Nom del producte | Glacier One 360D30 X2 |
| Tipus de producte | AIO Liquid CPU Cooler |
| Compatibilitat del sòcol | Intel LGA 115x, 1200, 1700, 1851; AMD AM4, AM5 |
| Pump Block Dimensions (LxWxH) | 85.5 x 80.9 x 65.9 mm |
| Radiator Dimensions (LxWxH) | 397 x 120 x 27 mm |
| Longitud de la tuberia | 400 mm ± 10 mm |
| Material de placa freda | Coure 1100 |
| Material del radiador | Aluminum (AL3003) |
| Material del tub | CIIR rubber with black braided sleeves |
| Líquid de refrigeració | Deionized Water and Propylene Glycol mix |
| Velocitat de la bomba | 3100 ± 10% RPM |
| Soroll de la bomba | 20 dBA |
| Tipus de ventilador | PH-F120D30_DRGB_PWM_BK01 |
| Dimensions del ventilador | 120 x 120 x 30 mm |
| Velocitat del ventilador | 250 - 2000 ± 10% RPM |
| Flux d'aire | 64.3 CFM |
| Pressió estàtica del ventilador | 3.01 mm-H2O |
| Soroll del ventilador | 30.2 dBA |
| D-RGB LED Quantity (per fan) | 30 unitats |
Informació de la garantia
Phanteks products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Phanteks website or contact Phanteks customer support. Keep your proof of purchase for warranty claims.
Suport i Contacte
For further assistance, technical support, or inquiries regarding your Phanteks Glacier One 360D30 X2 AIO Liquid CPU Cooler, please visit the official Phanteks weblloc:
You may also find helpful resources, FAQs, and driver downloads on their support page.
