1. Producte acabatview
The COSTWAY 20-inch High Velocity Industrial Pedestal Fan is designed to provide powerful and focused airflow for various environments. Its robust construction and adjustable features make it suitable for both residential and commercial applications.
Image: The COSTWAY 20-inch High Velocity Industrial Pedestal Fan in a warehouse environment.
This fan features a 20-inch diameter, 3 speed settings, 360-degree rotation, and adjustable height. It is equipped with a UL-certified motor and lightweight aluminum blades for efficient operation.
Image: The fan's versatility across different settings including home, restaurants, garages, and warehouses.
2. Instruccions de seguretat importants
Read all instructions before using this fan. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.
- Desendolleu sempre el ventilador de la presa de corrent abans de netejar-lo, fer-ne el manteniment o traslladar-lo.
- No feu funcionar el ventilador amb un cable o endoll danyat. Si el cable o l'endoll estan danyats, poseu-vos en contacte amb personal de servei qualificat per a la seva reparació o substitució.
- Keep the fan away from water and moisture. Do not use in wet locations such as bathrooms or laundry areas.
- No introduïu els dits ni objectes estranys a la reixeta mentre el ventilador està en funcionament.
- Assegureu-vos que el ventilador estigui col·locat sobre una superfície estable i anivellada per evitar que bolqui.
- Aquest ventilador està pensat només per a ús interior.
- No utilitzeu aquest ventilador amb cap dispositiu de control de velocitat d’estat sòlid.
- Supervise children when the fan is in use.
3. Contingut del paquet
Verify that all components are present before assembly. If any parts are missing or damaged, do not proceed with assembly and contact customer service.
- Muntatge del capçal del ventilador
- U-shaped Support Frame
- Small Brackets (2 pcs)
- Pal d'alçada ajustable
- Pol principal
- Base Rodona
- Coberta base
- Hardware Pack (Screws, Washers, Nuts, Screw Knobs, Rubber Ring)
- Guia d'usuari
4. Instruccions de muntatge
Follow these steps to assemble your COSTWAY Pedestal Fan. Refer to the assembly video for visual guidance.
Step 1: Attach U-shaped Support Frame to Fan Head
Align the U-shaped support frame with the mounting holes on the fan head. Secure it using the provided screw knobs and rubber rings. Ensure it is firmly attached.
Step 2: Attach Small Brackets to Support Frame
Attach the two small brackets to the U-shaped support frame using the provided screws (screw A), washers, and nuts. Tighten securely.
Step 3: Attach Adjustable Height Pole to Brackets
Connect the adjustable height pole to the small brackets using the remaining screws (screw A), washers, and nuts. Tighten securely.
Step 4: Assemble the Main Pole and Base
Place the main pole onto the round base. Secure it from underneath the base using the provided screws (screw B) and nuts. Then, place the base cover over the base.
Step 5: Connect Fan Assembly to Main Pole
Insert the adjustable height pole (with the fan head and support frame attached) into the top of the main pole. Adjust to the desired height and secure it with the height adjustment knob.
Image: Close-up of the fan's stable base and handle, illustrating reliable details.
Guia de vídeo de muntatge
For a visual guide on the assembly process, please refer to the official video below:
Official assembly video for the COSTWAY 20" High Velocity Industrial Pedestal Fan, demonstrating step-by-step installation.
5. Instruccions de funcionament
Encès/Apagat
Plug the fan into a standard 120V, 60Hz electrical outlet. Use the rotary switch located on the back of the fan head to turn the fan ON or OFF.
Configuració de velocitat
El ventilador té tres configuracions de velocitat:
- Baix: 2695 CFM (4578 m³ / h)
- Mitjà: 3368 CFM (5722 m³ / h)
- Alt: 4210 CFM (7152 m³ / h)
Rotate the switch to select the desired airflow intensity.
Image: Visual representation of the fan's three speed settings and airflow capabilities.
Adjusting Airflow Direction and Height
- Rotació de 360°: The fan head can be manually rotated 360 degrees to direct airflow as needed. Loosen the screw knob on the side of the fan head, adjust the angle, and then tighten the knob to secure.
- Alçada ajustable: The fan's height can be adjusted between 50 inches and 61.5 inches. Loosen the height adjustment knob on the pole, slide the inner pole to the desired height, and then tighten the knob firmly.
Image: Demonstrations of the fan's 360-degree rotation and adjustable height features.
6. Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga vida útil del ventilador.
- Neteja: Desendolleu sempre el ventilador abans de netejar-lo. Feu servir un drap suau i sec.amp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents. For the fan blades, carefully remove the front grille (if applicable and designed for removal) and wipe the blades with a soft cloth. Ensure all parts are dry before reassembling and operating.
- Emmagatzematge: Quan no l'utilitzeu durant períodes prolongats, guardeu-lo en un lloc fresc i sec. Es recomana tapar-lo per protegir-lo de la pols.
- Cura del cordó: Do not wrap the power cord tightly around the fan. Use the integrated wire organizer for neat storage.
7. Solució De Problemes
Si teniu problemes amb el ventilador, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| El ventilador no s'encén. | No power supply; fan not plugged in; power switch off. | Ensure the fan is securely plugged into a working outlet. Turn the power switch to an ON position. Check circuit breaker. |
| Flux d'aire reduït. | Fan blades or grille are dirty; incorrect speed setting. | Clean the fan blades and grille. Select a higher speed setting. |
| Sorolls o vibracions inusuals. | Loose parts; fan not on a level surface; foreign object in grille. | Check all assembly screws and tighten if loose. Place the fan on a stable, level surface. Unplug and inspect for obstructions. |
8. Especificacions
| Número de model | ES10421US-BK |
| Color | Negre |
| Material | Metall, Alumini |
| Product Dimensions (Dia. x H) | 21.5" x 50"-61.5" (55 cm x 126.5-156 cm) |
| Fan Cover Diameter | 21 polzades (54 cm) |
| Diàmetre de la pala del ventilador | 20 polzades (50 cm) |
| Longitud del cable d'alimentació | 6 peus (183 cm) |
| Nombre de fulles | 3 |
| Voltage | 120 V |
| Freqüència | 60 Hz |
| Potència nominal | 120 W |
| Airflow (Low/Medium/High) | 2695 CFM / 3368 CFM / 4210 CFM |
| Noise Level (Low/Medium/High) | 66 dB / 71 dB / 74 dB |
| Pes net | 21 lliures (9.5 kg) |
Image: Detailed product dimensions and electrical specifications.
Image: Close-up of the fan's UL-certified motor with double ball bearings, indicating lower noise and extended lifespan.
9. Garantia i Suport
Per obtenir informació sobre la garantia o assistència tècnica, consulteu la documentació inclosa amb la compra o poseu-vos en contacte amb el servei d'atenció al client de COSTWAY. Conserveu el rebut de compra per a reclamacions de garantia.
