Introducció
This manual provides detailed instructions for the safe and effective use of your KiCA Jet Fan Ultra and Jetfan 1.0 Electric Air Dusters. Please read this manual thoroughly before operating the devices and retain it for future reference.

Image: The KiCA Jet Fan Ultra (left) and Jetfan 1.0 (right) electric air duster units. The Jet Fan Ultra is a rectangular, gun-shaped device with a nozzle, while the Jetfan 1.0 is a smaller, T-shaped device.
Informació de seguretat
- Do not point the air duster at eyes, face, or body.
- Mantenir fora de l'abast dels nens.
- Do not operate in wet conditions or near flammable liquids or gases.
- Assegureu-vos que el port de càrrega estigui sec abans de connectar el carregador.
- No desmunteu ni modifiqueu el dispositiu.
- Feu servir només el cable de càrrega i l'adaptador proporcionats.
Contingut del paquet
Verifiqueu que tots els elements siguin presents al vostre paquet:
- KiCA Jet Fan Ultra
- KiCA Jetfan 1.0
- Cable de càrrega (USB-C)
- Nozzle Attachments (if applicable)
- Manual d'usuari (aquest document)
Configuració
Càrrega inicial
Before first use, fully charge both devices. Connect the provided USB-C charging cable to the charging port on each device and to a suitable USB power adapter. The indicator lights will show charging status.
Attaching Nozzles (Jet Fan Ultra)
Align the desired nozzle attachment with the air outlet of the Jet Fan Ultra and push firmly until it clicks into place. Ensure it is securely attached before operation.
Instruccions de funcionament
KiCA Jet Fan Ultra
- Encès/apagat: Mantén premut el botó d’engegada per engegar o apagar el dispositiu.
- Ajust de la velocitat de l'aire: Use the speed adjustment buttons (often marked '+' and '-') to cycle through different air speed levels. The indicator lights will show the current speed setting.
- Llum LED: The Jet Fan Ultra features double-sided LEDs. Press the light button to activate or deactivate the integrated LED lights for improved visibility in dark areas.

Image: The KiCA Jet Fan Ultra demonstrating its double-sided LED lights, illuminating a dark area within a car engine bay for precise cleaning.
KiCA Jetfan 1.0
- Encès/apagat: Mantén premut el botó d’engegada per engegar o apagar el dispositiu.
- Mode manual: Press the trigger button to activate the airflow. Release the button to stop.
- Mode automàtic: After powering on, press the trigger button and then single-tap the power button to switch between manual and auto mode. In auto mode, the fan will run continuously until switched off or back to manual mode.
- Adjusting Air Speed (Jetfan 1.0): The Jetfan 1.0 typically has multiple gears. Single-tap the power button (after initial power-on) to cycle through the gears (speed settings). Blue indicator lights will show the current gear.
- Primera marxa: 1 blue indicator, approx. 18,000rpm, 2.5m/s
- Segona marxa: 2 blue indicators, approx. 36,000rpm, 6.5m/s
- Tercera marxa: 3 blue indicators, approx. 60,000rpm, 9.0m/s
- Quarta marxa: 4 blue indicators, approx. 86,000rpm, 11.5m/s

Image: The KiCA Jetfan 1.0 illustrating its four gear settings, with corresponding RPM and wind speed values indicated by blue lights.

Image: The KiCA Jetfan 1.0 demonstrating its manual mode (trigger press for airflow) and auto mode (continuous airflow after a specific button sequence).
Manteniment
- Neteja: Use a soft, dry cloth to wipe the exterior of the devices. Do not use harsh chemicals or abrasive materials.
- Filtre d'entrada d'aire: Periodically check the air inlet for dust or debris accumulation. Gently clean the filter area with a soft brush or another air duster to ensure optimal performance.
- Emmagatzematge: Guardeu els dispositius en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Cura de la bateria: For prolonged storage, charge the devices to approximately 50% every three months to maintain battery health.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s’encén. | Bateria baixa. | Carregueu el dispositiu completament. |
| Flux d'aire feble. | Low battery; obstructed air inlet. | Charge the device; clean the air inlet filter. |
| El dispositiu s'atura inesperadament. | Sobreescalfament; bateria baixa. | Allow the device to cool down; charge the device. |
| LED lights not working (Jet Fan Ultra). | Light function not activated. | Press the dedicated light button to activate. |
Especificacions
KiCA Jet Fan Ultra
- Velocitat del vent: Up to 109 MPH (approx. 48.7 m/s)
- Potència: 171W Industrial Power
- Max Thrust: 185 g
- Característiques: Double-sided LEDs

Image: The KiCA Jet Fan Ultra showcasing its high-performance motor with specifications including 171W industrial power, 109mph hurricane speed, and 185g max thrust.
KiCA Jetfan 1.0
- Pes: 220 g
- Velocitat màxima del vent: 11.5 m/s (Fourth Gear)
- Motor: 9.99Wh Motor
- Modes: Manual, automàtic
- Dimensions: Approximately 124mm (length) x 73mm (width) x 35mm (height of nozzle section)

Image: The KiCA Jetfan 1.0 illustrating its compact size (220g), super powerful airflow (11.5m/s), built-in battery, and multifunctional capabilities.

Image: The KiCA Jetfan 1.0 with dimensions indicated: 124mm length, 73mm width, and 35mm height of the nozzle section.
Garantia i Suport
For warranty information and technical support, please refer to the official KiCA weblloc web o contacteu directament amb el seu servei d'atenció al client. Les dades de contacte normalment es troben a l'embalatge del producte o al fabricant. weblloc.
Fabricant: Kica
Data de primera disponibilitat: 24 d'abril de 2025



