1. Informació de seguretat
Please read and understand all safety instructions before installing or using the MONTECH HS02 PRO PC Case. Failure to follow these instructions may result in damage to the product, personal injury, or voiding of the warranty.
- Seguretat elèctrica: Ensure all power components are properly grounded and connected. Disconnect power before performing any installation or maintenance.
- Manipulació: The case contains tempered glass panels. Handle with care to prevent breakage. Avoid dropping or subjecting the case to strong impacts.
- Ventilació: Ensure adequate airflow around the case to prevent overheating. Do not block ventilation openings.
- Medi ambient: Operate the case in a dry, stable environment. Avoid extreme temperatures, humidity, and direct sunlight.
- Nens i animals de companyia: Keep the product and its components out of reach of children and pets. Small parts can be a choking hazard.
2. Contingut del paquet
Verify that all items listed below are present in your package. If any items are missing or damaged, please contact Montech customer support.
- MONTECH HS02 PRO ATX Mid-Tower PC Case
- Caixa d'accessoris (cargols, brides de cremallera, separadors, etc.)
- Manual d'usuari (aquest document)
- Pre-installed GF120 V2 ARGB Fans (5x)
3. Producte acabatview
The MONTECH HS02 PRO is a high-airflow ATX mid-tower PC case designed for optimal thermal performance and aesthetic appeal. It features a unique reversible layout and a sturdy curved tempered glass front panel.
Característiques principals:
- 8-Degree Curved Glass Panel: The front tempered glass panel features a subtle 8-degree curved edge, offering a distinctive and refined view of the interior with minimal visual distortion.
- Disseny reversible: A top-down reversible layout allows the entire setup to be positioned on either the left or right side, showcasing your build from your preferred angle.
- Vertical Ventilation: Bottom air intake and top exhaust create a natural chimney effect for efficient heat dissipation.
- Vertical GPU Ready: Rotatable PCIe slots enable an instant vertical GPU setup without requiring an extra holder or stand.
- Sink-In Design: A recessed bottom fan and motherboard layout maintain a clean, unobstructed side view.
- Pre-installed ARGB PWM Fans: Comes with 5 pre-installed GF120 V2 ARGB fans, fully syncable with motherboard lighting control.
- Back-Connect Motherboard Ready: Supports standard and back-connect motherboards, including MSI Project Zero, ASUS BTF, and more.
- AmpCapacitat d'emmagatzematge: Supports multiple storage drives (HDD/SSD) for flexible and expandable storage options.
Identificació de components:
4. Configuració i instal·lació
This section provides general guidelines for setting up your MONTECH HS02 PRO PC case. For detailed component-specific instructions, refer to your motherboard, GPU, and PSU manuals.
4.1 Preparació del cas
- Desembalatge: Traieu amb cura la caixa del seu embalatge. Inspeccioneu-la per si hi ha hagut danys durant l'enviament.
- Eliminació del panell: Gently remove the tempered glass side panel and the rear metal side panel. The tempered glass panel is secured with toolless latches.
- Caixa d'accessoris: Localitzeu la caixa d'accessoris dins la carcassa, que conté tots els cargols i els accessoris de muntatge necessaris.
4.2 Instal·lació de la placa base
- Enfrontaments: Ensure the correct standoffs are installed for your motherboard form factor (Mini-ITX, Micro-ATX, or ATX). Adjust if necessary.
- Escut d'E/S: Install your motherboard's I/O shield into the rear opening of the case.
- Muntatge: Carefully align your motherboard with the standoffs and gently lower it into place. Secure it with the provided screws.
- Back-Connect Motherboards: If using a back-connect motherboard, ensure proper alignment with the designated cutouts for cable routing.
4.3 Instal·lació de la unitat d'alimentació (PSU).
- Muntatge: The PSU mounts at the bottom of the case. Slide the PSU into its designated bay from the rear.
- Assegurament: Fixeu la font d'alimentació amb els cargols de la part posterior de la carcassa.
- Cablejat: Route necessary power cables through the cable management cutouts to the motherboard and other components.
4.4 Instal·lació d'unitats d'emmagatzematge (HDD/SSD)
- Baies en cotxe: Utilize the designated drive bays for 3.5" HDDs and 2.5" SSDs.
- Muntatge: Secure drives using the provided screws or toolless mechanisms where applicable.
4.5 Instal·lació de la targeta gràfica (GPU)
- Ranures PCIe: Remove the necessary PCIe slot covers.
- Instal·lació horitzontal: Insert the GPU into the primary PCIe slot on your motherboard and secure it with screws.
- Vertical Installation (Optional): The rotatable PCIe slots allow for vertical GPU mounting. Rotate the bracket and install your GPU vertically. A PCIe riser cable (not included) is required for vertical mounting.
4.6 Cooling System Installation (Fans/Radiators)
- Ventiladors preinstal·lats: The case comes with 5 pre-installed ARGB PWM fans. Connect their power and ARGB cables to your motherboard or a fan controller.
- Additional Fans/Radiators: The case supports additional fans and radiators at the top, rear, and bottom. Refer to the specifications for supported sizes.
- AIO Cooler: Install your All-in-One (AIO) liquid cooler radiator and fans according to the cooler's instructions, utilizing the available mounting points.
4.7 Gestió de cables
Utilitzeu el ample space behind the motherboard tray and the cable management cutouts to route and secure cables. This improves airflow and aesthetics.
5. Instruccions de funcionament
Once all components are installed and secured, you can power on your system.
5.1 Encès
- Connecteu els perifèrics: Connect your monitor, keyboard, mouse, and other peripherals to your system.
- Cable de corrent: Connect the PSU power cable to a wall outlet and flip the PSU's power switch to the 'ON' position.
- Botó d'encesa: Press the power button on the front I/O panel of the case.
5.2 Front I/O Panel Functions
- Ports USB 3.0: Per connectar dispositius compatibles amb USB 3.0.
- Port USB tipus C: Per connectar dispositius compatibles amb USB tipus C.
- Jack d'àudio: Per a auriculars o altaveus.
- Presa de micròfon: Per connectar un micròfon.
- Botó d'encesa: Per encendre o apagar el sistema.
- Botó LED: To cycle through the 29 ARGB lighting modes for the pre-installed fans and integrated light strip.
6. Manteniment
Un manteniment regular ajuda a garantir un rendiment òptim i una llarga vida útil dels components del teu PC.
- Neteja de pols: Periodically clean dust filters (top, bottom, front) to maintain optimal airflow. Use compressed air to remove dust from internal components.
- Glass Panel Cleaning: Use a soft, lint-free cloth and a non-abrasive glass cleaner to clean the tempered glass panels. Avoid harsh chemicals.
- Gestió de cables: Comproveu periòdicament el cablejat per assegurar-vos que no hi hagi cables que obstrueixin el flux d'aire ni les aspes del ventilador.
- Inspecció del ventilador: Ensure all fans are spinning freely and quietly. Clean fan blades if dust buildup is significant.
7. Solució De Problemes
This section addresses common issues you might encounter. For more complex problems, consult Montech customer support or a qualified technician.
Problemes comuns i solucions:
| Problema | Causa possible | Solució |
|---|---|---|
| El sistema no s'encén. | PSU switch off, power cables loose, faulty PSU/motherboard. | Ensure PSU switch is ON. Check all power connections (24-pin, CPU, GPU). Test PSU if possible. |
| Els ventiladors no giren o l'RGB no funciona. | Fan cables disconnected, ARGB cables disconnected, faulty fan/controller. | Verify fan power and ARGB headers are securely connected to motherboard/controller. Use the LED button to cycle modes. |
| Flux d'aire deficient o temperatures elevades. | Dust buildup, obstructed vents, incorrect fan orientation. | Clean dust filters and internal components. Ensure fans are oriented correctly for intake/exhaust. Check for cable obstructions. |
| Front I/O ports not functioning. | Front panel connectors loose or incorrectly connected to motherboard. | Refer to your motherboard manual to ensure all front panel headers (USB, audio) are correctly connected. |
8. Especificacions
Detailed technical specifications for the MONTECH HS02 PRO ATX Mid-Tower PC Case.
| Característica | Especificació |
|---|---|
| Nom del model | HS02 PRO Glass Black with Fans |
| Número de model | HS02PB |
| Tipus de cas | Torre mitja |
| Compatibilitat amb la placa base | ATX, Micro-ATX, Mini-ITX (with back-connect support) |
| Dimensions (LxWxH) | 32 x 52.4 x 58.8 polzades (aprox. 81.3 x 133.1 x 149.4 cm) |
| Pes de l'article | 24.2 lliures (aprox. 10.98 kg) |
| Panell frontal | Curved Tempered Glass (8-degree) |
| Ventiladors preinstal·lats | 5x GF120 V2 ARGB PWM Fans |
| Mètode de refrigeració | Air (Vertical Ventilation / Chimney Effect) |
| Tipus de muntatge de la font d'alimentació | Muntatge inferior |
| Ports d'E / S frontals | 2x USB 3.0, 1x USB Type-C, Audio, Mic, Power Button, LED Button |
| Liquidació de la GPU | Up to 420mm (supports vertical GPU with rotatable PCIe slots) |
| Badies d'emmagatzematge | Multiple HDD/SSD support |
| Color | Negre |
9. Garantia i Suport
For warranty information and technical support, please refer to the official Montech weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el comprovant de compra per a reclamacions de garantia.
- Montech Official Weblloc: www.montechpc.com
- Atenció al client: Consulteu el website for contact details, including email and phone support.
