Hyper Tough HT Charge 20V Max Lithium-Ion Battery 1.5 Ah

Hyper Tough HT Charge 20V Max Lithium-Ion Battery 1.5 Ah User Manual

Instruccions completes per a un ús segur i eficaç.

1. Introducció

This manual provides essential information for the safe operation, maintenance, and storage of your Hyper Tough HT Charge 20V Max Lithium-Ion Battery 1.5 Ah. Please read these instructions carefully before using the battery to ensure optimal performance and safety.

2. Instruccions de seguretat importants

WARNING: Failure to follow these safety instructions may result in fire, electric shock, or serious injury.

  • Always use the battery with compatible Hyper Tough 20V Max tools and chargers. Using incompatible accessories may cause damage or injury.
  • No submergiu la bateria en aigua o altres líquids.
  • Do not store or use the battery in locations where the temperature may reach or exceed 104°F (40°C), such as in direct sunlight or inside a vehicle.
  • No incinereu la bateria. Pot explotar en un incendi.
  • Do not short-circuit the battery terminals. Avoid contact with conductive materials like keys, coins, or jewelry.
  • Do not disassemble, open, or modify the battery pack.
  • If battery fluid leaks, avoid contact with skin and eyes. If contact occurs, flush with water and seek medical attention.
  • Mantingueu la bateria fora de l'abast dels nens.
  • Desfeu-vos de les piles de manera responsable d'acord amb la normativa local. No les llenceu a les escombraries domèstiques.

3. Producte acabatview

The Hyper Tough HT Charge 20V Max Lithium-Ion Battery 1.5 Ah provides reliable power for your Hyper Tough 20V Max cordless tools. Its compact design and lithium-ion technology offer consistent performance.

Hyper Tough HT Charge 20V Max Lithium-Ion Battery 1.5 Ah

An image showing the Hyper Tough HT Charge 20V Max Lithium-Ion Battery 1.5 Ah. The battery is black with a red label displaying 'HT CHARGE' and '20V MAX 1.5Ah LITHIUM-ION'.

4. Configuració i càrrega inicial

  1. Desembalatge: Traieu amb cura la bateria del seu embalatge. Inspeccioneu-la per veure si hi ha signes de danys.
  2. Càrrega: Before first use, fully charge the battery using a compatible Hyper Tough 20V Max battery charger. Follow the charger's instructions for proper charging procedures.
  3. Instal·lació: Align the battery with the battery slot on your Hyper Tough 20V Max tool. Slide the battery into place until it clicks securely. Ensure it is firmly seated before operation.

5. Instruccions de funcionament

  • Nivell de bateria: Monitor the battery charge level, if indicated on your tool or charger, to avoid complete discharge, which can reduce battery life.
  • Sobreescalfament: If the battery becomes excessively hot during use, discontinue operation and allow it to cool down before recharging or resuming work.
  • Eliminació: To remove the battery from a tool, press the release button (if present) and slide the battery out.

6. Manteniment i emmagatzematge

  • Neteja: Keep the battery terminals clean and free of dirt or debris. Use a dry cloth to wipe the battery. Do not use solvents or harsh chemicals.
  • Emmagatzematge: Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures. Ideally, store batteries with a partial charge (around 50%) for extended periods.
  • Emmagatzematge a llarg termini: For long-term storage, recharge the battery every 3-6 months to maintain its health.

7. Solució De Problemes

ProblemaCausa possibleSolució
La bateria no es carregaCharger not plugged in; faulty charger; battery too hot/cold; poor connection.Ensure charger is properly connected to power and battery. Check charger for damage. Allow battery to reach room temperature. Clean battery terminals.
L'eina no funciona amb la bateria carregadaBattery not fully inserted; tool malfunction; battery fault.Ensure battery is securely clicked into place. Test battery with another compatible tool or charger. If issue persists, contact support.
Temps d'execució reduïtBattery nearing end of life; operating in extreme conditions; heavy load.Ensure battery is fully charged. Avoid continuous heavy-duty use. Consider replacing the battery if it's old.

8. Especificacions

  • Model: HT Charge 20V Max Lithium-Ion Battery 1.5 Ah
  • Voltage: 20 V màx
  • Capacitat: 1.5 Ah
  • Tipus de bateria: Ió de liti
  • Dimensions del producte: 6 x 6 x 6 polzades
  • Fabricant: Hyper Tough

9. Garantia i Suport

This Hyper Tough battery is covered by a limited warranty against defects in materials and workmanship. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Hyper Tough website. For technical support or service inquiries, please contact Hyper Tough customer service.

Documents relacionats - HT Charge 20V Max Lithium-Ion Battery 1.5 Ah

Preview Manual d'instruccions de la serra recíproca sense fil Hyper Tough 20V Max - AQ80002G
Manual d'instruccions complet per a la serra recíproca sense fil Hyper Tough 20V Max HT Charge de ions de liti (model AQ80002G), que cobreix les pautes de seguretat, el funcionament, el manteniment, la resolució de problemes i les especificacions.
Preview Hyper Tough 20V MAX Lithium-Ion Cordless Drill/Driver AQ75034G User Manual
Comprehensive user manual for the Hyper Tough 20V MAX Lithium-Ion Cordless Drill/Driver (Model AQ75034G), covering safety, operation, technical specifications, troubleshooting, and warranty information.
Preview Hyper Tough AQ75034G 20V MAX Cordless Drill-Driver Instruction Manual and Warranty
Comprehensive instruction manual and warranty information for the Hyper Tough AQ75034G 20V MAX Cordless Drill-Driver, covering safety, operation, maintenance, and specifications.
Preview Hyper Tough 8.0V Max Cordless Rotary Tool Instruction Manual
This manual provides comprehensive instructions for the Hyper Tough 8.0V Max Lithium-ion Cordless Rotary Tool, covering safety guidelines, operation, maintenance, accessory usage, and specifications. Learn how to safely operate and care for your rotary tool.
Preview Preguntes freqüents i guia sobre la motoserra sense fil Hyper Tough 20V Max
Preguntes freqüents i informació essencial sobre la motoserra autolubricant sense fil Hyper Tough 20V Max de 10 cm, inclosa la configuració, el manteniment i la garantia.
Preview Hyper Tough 20V 7.5-Inch Fan Operator's Manual
Comprehensive operator's manual for the Hyper Tough 20V 7.5-Inch Fan (Model C1005), detailing safety, operation, maintenance, and troubleshooting. Essential guide for safe and effective use.