TFA Dostmann TFA-ID Pool Transmitter ID-A5 (Model 30.3907.02) Instruction Manual

Introducció

This manual provides essential information for the proper setup, operation, and maintenance of your TFA Dostmann TFA-ID Pool Transmitter ID-A5. This device is designed for wireless measurement of water temperature in various environments, including pools, hot tubs, ponds, and ice baths, and integrates with the TFA.me WIFI system for online monitoring.

Producte acabatview

The TFA-ID Pool Transmitter ID-A5 is a digital transmitter for monitoring water temperature. It operates with the TFA.me WIFI weather station system or compatible TFA-ID weather stations. The transmitter sends water temperature data wirelessly, allowing for online monitoring via the TFA.me portal on mobile devices or PCs.

Característiques principals:

• Wireless transmission of water temperature.
• Compatibility with TFA.me WIFI system and specific TFA-ID weather stations (35.1132.01, 30.3075.01, 35.8100.54, 35.8101.54, 35.8102.01, 35.8103.02).
• Range of up to 100 meters in open fields.
• Online monitoring capabilities via the TFA.me portal with graphical functions.
• Suitable for pools, hot tubs, ponds, and ice baths.
• Disseny impermeable.
• High accuracy: ±1 °C.

Contingut del paquet

Si us plau, comproveu que tots els elements siguin presents i en bon estat:

• 1 x TFA-ID-A5 POOL Transmitter
• 1 x Manual d'usuari (multilingüe)

Note: 2 x 1.5V AA batteries are required and must be purchased separately.

Configuració

1. Instal·lació de la bateria

The TFA-ID Pool Transmitter requires two 1.5V AA batteries (not included).

1. Localitzeu el compartiment de la bateria al transmissor.
2. Obriu la tapa del compartiment de la bateria.
3. Introduïu dues piles AA d'1.5 V, assegurant-vos de la polaritat correcta (+/-).
4. Securely close the battery compartment cover to maintain water resistance.

Imatge: Lateral view of the TFA-ID Pool Transmitter, illustrating the design which includes the battery compartment.

2. Pairing with TFA.me WIFI System or Compatible Weather Station

The transmitter is designed to work with the TFA.me WIFI system or specific TFA-ID weather stations. Refer to the manual of your main weather station or the TFA.me system for detailed pairing instructions.

• Ensure your main weather station or TFA.me gateway is powered on and within range.
• Follow the pairing procedure outlined in your main device's instruction manual to connect the pool transmitter.
• The article code for compatible stations can be found on the back of your device.

Image: The TFA.me online portal, where temperature data can be monitored.

3. Col·locació

Place the floating transmitter in the water of your pool, hot tub, pond, or ice bath. Ensure it floats freely and is not obstructed, allowing for accurate temperature measurement and optimal signal transmission.

Imatge: Frontal view of the TFA-ID Pool Transmitter, showing its display and floating design.

Instruccions de funcionament

1. Temperature Measurement and Transmission

Once properly set up and paired, the TFA-ID Pool Transmitter will automatically measure the water temperature and transmit the data wirelessly to your connected TFA.me WIFI system or compatible weather station. The transmission range is up to 100 meters in open areas.

2. Online Monitoring via TFA.me Portal

For continuous monitoring of measured values, access the TFA.me portal via your mobile phone or PC. The portal provides graphical functions to track temperature changes over time, allowing you to stay informed about your water body's conditions.

• Visit the TFA.me portal website or use the dedicated application.
• Inicia la sessió amb les credencials del teu compte.
• View real-time temperature data and historical graphs from your TFA-ID Pool Transmitter.

Manteniment

1. Neteja

Regularly clean the exterior of the transmitter with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the device. Ensure the device is dry before placing it back in water.

2. Substitució de la bateria

When the battery indicator on your main weather station or the TFA.me portal shows low battery, replace the two 1.5V AA batteries. Follow the battery installation steps outlined in the Setup section. Always use fresh batteries of the specified type.

3. Emmagatzematge

If the transmitter will not be used for an extended period, remove the batteries to prevent leakage and store the device in a cool, dry place away from direct sunlight.

Resolució de problemes

No Temperature Reading or Incorrect Values:

• Comproveu les bateries: Assegureu-vos que les piles estiguin correctament instal·lades i que no estiguin esgotades. Substituïu-les si cal.
• Comprova l'interval: Verify that the transmitter is within the 100-meter range of the main weather station or TFA.me gateway. Obstacles like walls or large metal objects can reduce the effective range.
• Reemparella el dispositiu: If the connection is lost, try re-pairing the transmitter with your main weather station or TFA.me system according to their respective manuals.
• Factors ambientals: Extreme temperature fluctuations or direct sunlight on the sensor can sometimes affect readings. Ensure proper placement.
• Neteja del sensor: Ensure the temperature sensor area is clean and free from debris or algae buildup.

TFA.me Portal Not Displaying Data:

• Connexió a Internet: Ensure your TFA.me gateway or main weather station has a stable internet connection.
• Inici de sessió al compte: Verify you are logged into the correct TFA.me account.
• Estat del dispositiu: Check the status of the transmitter within the TFA.me portal to ensure it is recognized and active.

Especificacions

Garantia i Suport

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official TFA Dostmann website. The included user manual provides additional details and contact information.