1. Introducció
The Intelbras IVP 7000 SMART EX is a wireless passive infrared (PIR) motion sensor designed for robust and reliable intrusion detection. It incorporates advanced signal analysis technology to ensure efficient detection while minimizing false alarms. This sensor is particularly suited for outdoor environments and areas with a high risk of intrusion, offering enhanced security for your property.
This manual provides detailed instructions for the installation, operation, and maintenance of your IVP 7000 SMART EX sensor. Please read it carefully before proceeding with installation and use.
2. Característiques clau
- Immunitat a les mascotes: Designed to ignore pets weighing up to 30 kg (approximately 66 lbs), reducing false alarms caused by animals.
- Dual PIR Detection: Utilizes two passive infrared sensors for more accurate and reliable motion detection.
- Adjustable PIR Sensitivity: Allows customization of detection sensitivity to suit specific environmental conditions.
- Indicador d'estat LED: Provides visual feedback on detection events and sensor status.
- Anti-Tamper Switch: Triggers an alarm if the sensor cover is opened or the unit is forcibly removed from its mounting location.
- Articulated Mounting Bracket: Includes a flexible bracket for easy and precise positioning during installation.
- Indicació de bateria baixa: Notifies users when the battery level is low, ensuring continuous operation.
- Filtre òptic: Enhances detection accuracy and reduces interference from external light sources.
3. Configuració i instal·lació
Proper installation is crucial for optimal performance of your IVP 7000 SMART EX sensor. Follow these steps carefully.
3.1 Desembalatge i comprovació de components
Abans de la instal·lació, assegureu-vos que hi hagi tots els components:
- IVP 7000 SMART EX Sensor Unit
- Articulated Mounting Bracket
- Screws and Wall Plugs for mounting
- Manual d'usuari (aquest document)
3.2 Instal·lació de la bateria
The sensor operates on batteries (type not specified, typically 3V lithium). Open the sensor casing carefully to access the battery compartment. Insert the batteries, observing the correct polarity (+/-). Close the casing de manera segura.
3.3 Selecció de la ubicació de muntatge
Trieu una ubicació de muntatge que proporcioni un espai sense obstruccions view of the area to be protected. Avoid aiming the sensor directly at heat sources, reflective surfaces, or areas with strong air currents. For outdoor use, consider protection from direct rain and sunlight, although the sensor is designed for outdoor environments.
Figura 1: Frontal view of the IVP 7000 SMART EX sensor, showing the PIR lens and Intelbras branding.
Figura 2: lateral view of the IVP 7000 SMART EX sensor, illustrating its profile and weather-resistant design.
3.4 Muntatge físic
- Attach the articulated mounting bracket to the desired wall or surface using the provided screws and wall plugs. Ensure it is firmly secured.
- Mount the IVP 7000 SMART EX sensor onto the articulated bracket.
- Adjust the sensor's angle using the bracket to cover the intended detection area.
Figura 3: Esquena view of the IVP 7000 SMART EX sensor, highlighting the mounting points for the articulated bracket.
3.5 Pairing with Control Panel (Wireless Configuration)
Refer to your security system's control panel manual for specific instructions on how to pair a new wireless sensor. Generally, this involves putting the control panel into 'learning' mode and then triggering the sensor (e.g., by opening the tamper switch or walking in front of it) to register it with the system.
3.6 PIR Sensitivity Adjustment
The sensor features adjustable PIR sensitivity. Consult the internal dip switches or potentiometer (if present) inside the sensor casing to fine-tune the detection range and responsiveness. Test the sensor after adjustment to ensure optimal performance and pet immunity.
4. Instruccions de funcionament
Once installed and configured, the IVP 7000 SMART EX operates automatically to detect motion.
4.1 Detecció de moviment
The dual PIR sensors detect changes in infrared radiation caused by movement of warm bodies. When motion is detected within its coverage area, the sensor transmits a signal to the connected control panel.
4.2 indicador LED
The LED indicator on the sensor provides visual feedback:
- Brief Flash: Indicates motion detection.
- Continuous Light/Specific Pattern: May indicate low battery or a tamper event (refer to specific model documentation for exact patterns).
4.3 Pet Immunity
The pet immunity feature allows pets up to 30 kg to move freely within the detection zone without triggering an alarm. For this feature to work effectively, ensure the sensor is mounted at the recommended height and its sensitivity is correctly adjusted, as described in the setup section.
5. Manteniment
Un manteniment regular garanteix la longevitat i el funcionament fiable del sensor.
- Neteja: Periodically clean the sensor lens with a soft, dry cloth to remove dust, dirt, or cobwebs that could obstruct detection. Do not use abrasive cleaners or solvents.
- Substitució de la bateria: When the low battery indicator activates, replace the batteries promptly. Use only recommended battery types.
- Comprovacions periòdiques: Test the sensor periodically (e.g., monthly) by walking through its detection zone to ensure it is functioning correctly and communicating with the control panel.
- Tamper Switch: Assegureu-vos que el sensor casing is always securely closed to prevent tampsón les alarmes.
6. Solució De Problemes
If you encounter issues with your IVP 7000 SMART EX sensor, refer to the following common problems and solutions.
- Falses alarmes:
- Check for heat sources (heaters, direct sunlight) or strong air currents (vents, open windows) in the detection zone.
- Adjust PIR sensitivity to a lower setting.
- Ensure pet immunity is correctly configured and pets are within the specified weight limit.
- Netegeu la lent del sensor.
- Sense detecció:
- Verify batteries are correctly installed and not depleted. Replace if necessary.
- Check if the sensor is properly paired with the control panel.
- Ensure the detection area is clear of obstructions.
- Increase PIR sensitivity if needed.
- Indicació de bateria baixa:
- Replace the batteries immediately with new ones of the correct type.
- Tamper alarma:
- Assegureu-vos que el sensor casing is fully closed and secured.
- Check if the sensor is firmly mounted to prevent accidental removal.
7. Especificacions
| Fabricant | Intelbras (Generic in listing, but Intelbras on product) |
| Model | IVP 7000 SMART EX |
| Color | Blanc |
| Tipus de font d'alimentació | Electric Power (typically battery-operated for wireless sensors, with electric power referring to the system it connects to) |
| Voltage | 12V (likely for the system, sensor itself uses lower voltage batteries) |
| Nombre de productes | 1 |
| Tipus de muntatge | Muntatge de paret |
| Dimensions del producte (L x A x A) | 10 cm x 10 cm x 2 cm (3.94 x 3.94 x 0.79 polzades) |
| Immunitat per a mascotes | Fins a 30 kg |
| Tipus de detecció | Dual PIR (Passive Infrared) |
| Característiques especials | Adjustable PIR Sensitivity, LED Status Indicator, Anti-Tamper Switch, Optical Filter |
8. Informació de la garantia
This product is covered by a standard manufacturer's warranty. For specific details regarding warranty duration, coverage, and claims process, please refer to the warranty card included with your purchase or visit the official Intelbras weblloc web. Conserveu el comprovant de compra per validar la garantia.
9. Suport
For technical assistance, troubleshooting beyond this manual, or product inquiries, please contact Intelbras customer support. Contact information can typically be found on the manufacturer's weblloc web o a l'embalatge del producte.
Recursos en línia: Visit the Intelbras official website for FAQs, updated manuals, and software downloads.
Atenció al client: Refer to your product packaging or the Intelbras weblloc web per a números de telèfon i assistència per correu electrònic.
