1. Producte acabatview
The Cudy AC1200 Outdoor Wireless Access Point (AP1200 Outdoor) is designed to provide reliable and high-speed Wi-Fi connectivity in outdoor environments. It supports the latest 802.11ac Wave 2 technology, offering dual-band Wi-Fi speeds up to 867 Mbps on 5 GHz and 300 Mbps on 2.4 GHz. Key features include MU-MIMO, Beamforming, IP65 waterproof rating, 4KV lightning protection, and flexible Power over Ethernet (PoE) options.
Figure 1: Cudy AP1200 Outdoor Wireless Access Point Overview
2. Contingut del paquet
Verifiqueu que el vostre paquet conté tots els elements que s'enumeren a continuació:
- AP1200 Outdoor Wireless Access Point
- Adaptador d'alimentació
- Antenes desmuntables (2 unitats)
- Cable d'alimentació
- Kit de muntatge
- Cable Ethernet
- Guia d'instal·lació (aquest manual)
3. Maquinari acabatview
3.1 Aparença física
Figure 2: Cudy AP1200 Outdoor Access Point
3.2 Indicadors LED
The device features several LED indicators to show its status:
- LED d'alimentació: Indica l'estat d'alimentació.
- LED LAN: Indicates Ethernet connection status.
- 2.4GHz Wi-Fi LED: Indicates 2.4GHz wireless activity.
- 5GHz Wi-Fi LED: Indicates 5GHz wireless activity.
3.3 Ports i botons
The device includes the following ports and buttons:
- RJ45 Port (PoE-IN): Used for both data and power input via Power over Ethernet.
- Botó de restabliment: S'utilitza per restaurar la configuració predeterminada de fàbrica.
- Connectors d'antena: Two RP-SMA connectors for detachable antennas.
Figure 3: RJ45 Port with PoE-IN
4. Configuració i instal·lació
4.1 Connectar antenes
Carefully screw the two detachable 5dBi antennas onto the RP-SMA connectors on the device. Ensure they are securely fastened but do not overtighten.
Figure 4: Antennas Attached to AP1200 Outdoor
4.2 Power over Ethernet (PoE) Connection
The AP1200 Outdoor supports 802.3at/af PoE or 24~50V passive power supply. Use the included PoE adapter to power the device and connect it to your network.
- Connect one end of an Ethernet cable to the LAN port of your router or network switch.
- Connect the other end of this Ethernet cable to the 'LAN' port on the PoE adapter.
- Connect one end of the included Ethernet cable to the 'PoE' port on the PoE adapter.
- Open the protective cover on the AP1200 Outdoor and connect the other end of the Ethernet cable from the PoE adapter to the RJ45 (PoE-IN) port on the AP.
- Plug the PoE adapter into a power outlet. The device will power on, and the Power LED will illuminate.
4.3 Opcions de muntatge
The AP1200 Outdoor can be mounted on a pole or a wall using the provided mounting kit. Choose a location that offers optimal Wi-Fi coverage and is protected from direct impact.
- Muntatge al pal: Use the straps and brackets to secure the device to a pole.
- Muntatge a la paret: Use screws and anchors to attach the device to a wall.
Figure 5: Mounting Options (Wall and Pole)
5. Modes de funcionament
The Cudy AP1200 Outdoor supports multiple operating modes to suit various network requirements:
- Mode de punt d'accés (AP): Connects to a wired network and transforms it into a wireless network, allowing multiple Wi-Fi devices to connect.
- Mode d'extensió: Amplia la cobertura d'una xarxa sense fil existent.
- Mode d'encaminador: Funciona com a encaminador principal, proporcionant accés a Internet als dispositius connectats.
- Mode WISP: Connects wirelessly to an Internet Service Provider (ISP) network and shares the connection with local devices.
- Mesh Router Mode: Creates a seamless mesh Wi-Fi network with other compatible devices.
Mode de punt d'accés
Mode d'encaminador
Mode repetidor
Mode WISP
6. Configuració
To configure the AP1200 Outdoor, connect a computer to the device via Ethernet or Wi-Fi. Access the webinterfície de gestió basada en a web navegador.
- Ensure your computer is connected to the AP1200 Outdoor (either directly via Ethernet or to its default Wi-Fi network).
- Obre a web navegador i introduïu l'adreça IP predeterminada (normalment
192.168.10.1or refer to the Quick Installation Guide) in the address bar. - Enter the default username and password (typically
adminper a tots dos). - Follow the on-screen wizard to set up your desired operating mode, Wi-Fi name (SSID), and password.
- Save your settings and restart the device if prompted.
7. Manteniment
7.1 actualitzacions de microprogramari
Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Visit the Cudy official website for the latest firmware for your AP1200 Outdoor model.
7.2 Neteja
As an outdoor device with an IP65 rating, the AP1200 Outdoor is protected against dust and water. However, periodic cleaning can help maintain its appearance and prevent excessive buildup. Use a soft, damp drap per netejar l'exterior. No utilitzeu productes químics agressius ni netejadors abrasius.
7.3 Consideracions ambientals
The device is designed to operate in a wide range of outdoor temperatures (-40°C to 65°C). Ensure proper ventilation and avoid placing it in direct sunlight for prolonged periods if possible, to maximize lifespan.
Figure 6: Weather-Proof Design
8. Solució De Problemes
If you encounter issues with your AP1200 Outdoor, refer to the following common troubleshooting steps:
- Sense energia: Ensure the PoE adapter is correctly plugged into a power outlet and the Ethernet cable is securely connected to the AP's PoE-IN port. Check the power LED.
- Sense accés a Internet: Verify that your main router has internet access. Check the Ethernet cable connections between the router, PoE adapter, and AP. Ensure the AP is configured in the correct operating mode.
- Senyal Wi-Fi feble: Adjust the antenna orientation. Relocate the AP to a more central position or higher elevation. Check for physical obstructions.
- No es pot accedir Web Pàgina de gestió: Ensure your device is connected to the AP's network. Verify the IP address entered in the browser is correct. Try clearing your browser's cache or using a different browser.
- Restabliment de fàbrica: If problems persist, you may need to perform a factory reset. With the device powered on, use a paperclip to press and hold the Reset button for approximately 5-10 seconds until the LEDs flash. The device will restart with factory default settings.
9. Especificacions
| Característica | Descripció |
|---|---|
| Nom del model | AP1200 Exterior |
| Dimensions del producte | 9.45 x 3.94 x 2.11 polzades |
| Pes de l'article | 14.6 unces |
| Estàndard sense fils | 802.11ac Wave 2 |
| Classe de banda de freqüència | Doble banda (2.4 GHz i 5 GHz) |
| Velocitat Wi-Fi (5 GHz) | Fins a 867 Mbps |
| Velocitat Wi-Fi (2.4 GHz) | Fins a 300 Mbps |
| Antenes | 2 external 5dBi detachable antennas |
| Ports | 1x RJ45 (PoE-IN) |
| Font d'alimentació | 802.3at/af PoE or 24~50V Passive PoE (adapter included) |
| Protecció meteorològica | IP65 rated waterproof housing, 4KV lightning protection |
| Temperatura de funcionament | -40 °C a 65 °C |
| Dispositius compatibles | Ordinador personal, càmera de seguretat, televisió intel·ligent, telèfon intel·ligent, tauleta |
10. Informació de la garantia
Cudy products are backed by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Cudy weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
11. Suport tècnic
If you require further assistance or have questions not covered in this manual, please contact Cudy Technical Support. You can find contact information, FAQs, and additional resources on the official Cudy weblloc:
- Weblloc: www.cudy.com
- Correu electrònic: Consulteu el weblloc web per a adreces de correu electrònic d'assistència.
