ECOELER 6-Inch Motion Sensor LED Ceiling Light

1. Introducció

Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Imatge 1.1: Frontal view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.

2. Informació de seguretat

To reduce the risk of fire, electric shock, or personal injury, always follow these basic safety precautions:

• ADVERTÈNCIA: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans d'instal·lar o fer el servei.
• Aquest producte s'ha d'instal·lar d'acord amb el codi d'instal·lació aplicable per una persona familiaritzada amb la construcció i el funcionament del producte i els perills que comporta.
• Use only 120V AC, 60Hz circuits.
• No intenteu desmuntar ni modificar l'aparell. No hi ha peces a l'interior que l'usuari pugui reparar.
• Assegureu-vos que totes les connexions estiguin segures i aïllades correctament.
• Aquest aparell només és adequat per a ús interior.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• 6-Inch Black Motion Sensor LED Ceiling Light (x1)
• Maquinari de muntatge (cargols, femelles de cable)
• E26 Adapter Accessories (for recessed can installation)
• Manual d'instruccions (aquest document)

Image 3.1: Included accessories for installation.

4. Característiques del producte

• 3CCT Selectable: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
• Sensor de moviment: Passive Infrared (PIR) sensor detects motion within 9-16 feet.
• Retard de temps ajustable: Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
• Sensor de llum: The motion sensor functions only in dark environments, remaining off during daylight hours.
• Eficient energètic: 16W LED provides 1000 lumens of brightness.
• Instal·lació versàtil: Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.

Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.

5. Configuració i instal·lació

Before installation, ensure the power supply is turned off at the circuit breaker.

5.1. Junction Box Installation

1. Traieu la lent girant-la en sentit horari.
2. Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
3. Attach the fixture base to the junction box using the provided screws.
4. Twist the lens counter-clockwise to secure it back onto the fixture.

5.2. Recessed Can Installation

1. Traieu la lent girant-la en sentit horari.
2. Install the spring clips onto the fixture base using screws.
3. Connect the E26 adapter to the existing socket in the recessed can.
4. Connect the fixture wires to the E26 adapter wires using wire nuts.
5. Push the disk light into the recessed can until the spring clips secure it.
6. Twist the lens counter-clockwise to secure it back onto the fixture.

Image 5.1: Installation diagrams for junction box and recessed can.

6. Instruccions de funcionament

After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.

6.1. Funcionalitat del sensor de moviment

• Dia: The light remains off even if motion is detected, due to the integrated light sensor.
• Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
• The light will turn off after the set time delay if no further motion is detected.

Image 6.1: Motion sensor operation during day and night.

6.2. Color Temperature (CCT) Adjustment

The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:

1. Assegureu-vos que l'alimentació estigui apagada.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the CCT selector switch on the LED board (refer to Image 4.1).
4. Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.2: Visual representation of 3CCT options.

6.3. Time Delay Adjustment

The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:

1. Assegureu-vos que l'alimentació estigui apagada.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the time delay selector switch on the fixture (refer to Image 4.1).
4. Slide the switch to your desired time setting (30s, 1min, or 5mins).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.3: Time delay countdown feature.

7. Manteniment

The ECOELER LED ceiling light requires minimal maintenance.

• Neteja: Assegureu-vos que l'aparell estigui apagat abans de netejar-lo. Netegeu l'aparell amb un drap suau, sec o lleugerament humit.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electronic components.
• Lent: Keep the lens clean to ensure optimal light output and motion sensor performance.

8. Solució De Problemes

If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:

9. Especificacions

10. Garantia i Suport

This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.

For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER weblloc.

Fabricant: ECOELER ELECTRIC INC