1. Introducció
This manual provides detailed instructions for the safe and efficient use of your CYCPLUS A2 Tire Inflator and CYCPLUS M3 Cycling Computer. Please read this manual thoroughly before operating the devices to ensure proper function and to prevent damage.
2. Producte acabatview
2.1 Contingut del paquet
El paquet inclou:
- CYCPLUS A2 Tire Inflator (x1)
- CYCPLUS M3 Cycling Computer (x1)
- Adaptador de vàlvules Presta
- Adaptador de vàlvula Schrader
- Ball-shaped Air Needle
- USB-C Charging Cable (for M3)
- Bike Mount (for M3)
2.2 Característiques clau
CYCPLUS A2 Tire Inflator:
- Pressió màxima: Fins a 150 PSI / 10.3 Bar
- Inflació ràpida: Inflates a bicycle tire in approximately 2 minutes.
- Disseny compacte: Lightweight (380g) and portable.
- Built-in Hose: Integrated storage for the inflation hose.
Image 1: CYCPLUS A2 Tire Inflator (left) and M3 Cycling Computer (right). The inflator is a sleek black cylinder with a digital display and control buttons. The cycling computer is a rectangular device with a large digital screen displaying various metrics.
Image 2: Diagram illustrating the built-in hose storage of the CYCPLUS A2 Tire Inflator. The hose can be pulled out for use and pushed back in for compact storage.
CYCPLUS M3 Cycling Computer:
- GPS precís: 10-second positioning with 5 major satellite systems (GPS, GLONASS, Galileo, QZSS, BeiDou).
- Llarga vida útil de la bateria: Up to 100 hours of runtime on a single charge (1500mAh battery).
- Càrrega USB-C: Full charge in 2.5 hours.
- Pantalla gran: 2.8-inch LCD screen for clear data visibility.
- Pantalla personalitzable: Prioritize 8 key metrics per page via the CYCPLUS FIT App.
- Integració d'aplicacions: Connects to CYCPLUS FIT App for data analysis, firmware updates, and offline ephemeris download.
Image 3: The CYCPLUS M3 Cycling Computer mounted on a bicycle handlebar, showcasing its large 2.8-inch screen and slim profile. The screen displays speed, time, and other cycling data.
Image 4: A graphic illustrating the 5 major satellite systems (GPS, GLONASS, Galileo, QZSS, BeiDou) used by the CYCPLUS M3 Cycling Computer for accurate positioning.
Image 5: A visual representation of the various data metrics that can be displayed on the CYCPLUS M3 Cycling Computer, including speed, altitude, temperature, gradient, and trip distance. Some metrics like Cadence, Heart Rate, and Power require additional sensors.
Image 6: A smartphone screen showing the CYCPLUS FIT App interface, demonstrating how users can customize the data display on the M3 Cycling Computer. The app allows prioritizing 8 key metrics per page.
Imatge 7: Un sobreview of the CYCPLUS FIT App features, including data analysis, firmware updates, data sync to Strava, and downloading offline ephemeris. The app is available on Google Play and Apple App Store.
3. Configuració
3.1 CYCPLUS A2 Tire Inflator Setup
- Càrrega: Ensure the inflator is fully charged before first use. Connect the charging cable to the inflator's charging port and a suitable USB power source.
- Attaching Hose: Pull out the built-in inflation hose from its storage slot.
- Selecting Valve: Choose the appropriate valve adapter (Presta or Schrader) for your tire. Screw it onto the end of the inflation hose.
- Connecting to Tire: Securely attach the valve adapter to your tire's valve stem.
3.2 CYCPLUS M3 Cycling Computer Setup
- Càrrega: Charge the M3 Cycling Computer using the provided USB-C cable. A full charge takes approximately 2.5 hours.
- Muntatge: Attach the M3 to your bicycle handlebar using the included bike mount. Ensure it is securely fastened and positioned for easy viewing.
Image 8: A hand demonstrating how the CYCPLUS A2 Tire Inflator can be stored on a bicycle frame using a bike mount, indicating the convenience of the included accessory.
- Initial GPS Positioning: For the first use, take the M3 outdoors to an open area. Power it on. Initial GPS positioning may take 3-5 minutes. For faster positioning, download offline ephemeris via the CYCPLUS FIT App.
- CYCPLUS FIT App Connection:
- Download the "CYCPLUS FIT" app from the Google Play Store or Apple App Store.
- Open the app and follow the on-screen instructions to pair your M3 Cycling Computer.
- Use the app to customize data display fields and download offline ephemeris.
4. Instruccions de funcionament
4.1 CYCPLUS A2 Tire Inflator Operation
- Encès: Press and hold the power button to turn on the inflator. The digital display will show the current tire pressure.
- Establir la pressió objectiu: Use the '+' and '-' buttons to adjust the desired target pressure (PSI or Bar).
- Inici de la inflació: Press the power button briefly to start inflation. The inflator will automatically stop when the target pressure is reached.
- Atura la inflació manualment: Press the power button briefly again to stop inflation at any time.
- Desconnectar: Carefully disconnect the hose from the tire valve and store the hose back into its slot.
- Apagar: Premeu i manteniu premut el botó d'engegada per apagar l'inflador.
4.2 CYCPLUS M3 Cycling Computer Operation
- Encès/apagat: Mantén premut el botó d’engegada per engegar o apagar el dispositiu.
- Inici/Pausa/Atura la cursa:
- Press the start button (usually a dedicated button or a short press of the power button) to begin recording a ride.
- Press again to pause the ride.
- Hold the button to stop and save the ride.
- Navigate Display Pages: Use the designated navigation buttons (if available) or short presses of a specific button to cycle through different data display pages.
- Sincronització de dades: After your ride, connect the M3 to the CYCPLUS FIT App to sync your ride data for analysis and upload to platforms like Strava.
5. Manteniment
- Neteja: Netegeu els dos dispositius amb un drap suauamp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
- Emmagatzematge: Guardeu els dispositius en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Cura de la bateria:
- Charge the M3 Cycling Computer regularly, especially if not used for extended periods, to maintain battery health.
- Eviteu descarregar completament la bateria amb freqüència.
- Actualitzacions de firmware: Regularly check the CYCPLUS FIT App for firmware updates for the M3 Cycling Computer to ensure optimal performance and access to new features.
6. Solució De Problemes
6.1 CYCPLUS A2 Tire Inflator
| Problema | Causa possible | Solució |
|---|---|---|
| L'inflador no s'encén. | Bateria baixa. | Charge the inflator. |
| Inflator does not start inflation. | Hose not securely connected; target pressure already reached. | Ensure hose is tightly connected to valve; check target pressure setting. |
| Lectura de pressió inexacta. | Poor connection to valve. | Reconnect the hose to the tire valve securely. |
6.2 CYCPLUS M3 Cycling Computer
| Problema | Causa possible | Solució |
|---|---|---|
| No es pot adquirir el senyal GPS. | Indoors; obstructed view of sky; first-time use. | Move to an open outdoor area; wait 3-5 minutes for initial lock; download offline ephemeris via app. |
| La bateria s'esgota ràpidament. | Frequent backlight use; old firmware. | Adjust backlight settings; update firmware via CYCPLUS FIT App. |
| Cannot connect to CYCPLUS FIT App. | Bluetooth desactivat; aplicació no actualitzada; dispositiu no en mode d'emparellament. | Ensure phone Bluetooth is on; update app; follow app instructions for pairing. |
7. Especificacions
7.1 CYCPLUS A2 Tire Inflator
- Pressió màxima: 150 PSI / 10.3 Bar
- Pes: Aproximadament 380 g
- Compatibilitat: Presta, Schrader valves (adapters included)
- Aplicacions: Bicycles, motorcycles, cars, balls
7.2 CYCPLUS M3 Cycling Computer
- Visualització: LCD de 2.8 polzades
- Sistemes GPS: GPS, GLONASS, Galileo, QZSS, BeiDou
- Bateria: Bateria de liti recarregable de 1500 mAh
- Resistència de la bateria: Fins a 100 hores
- Temps de càrrega: Approximately 2.5 hours (USB-C)
- Compatibilitat de l'aplicació: CYCPLUS FIT App (iOS & Android)
- Data Metrics: Speed, Average Speed, Max Speed, Clock, Temperature, Altitude, Gradient, Ascent, Trip Dist, Trip Time, ODO Meter, Lap (Cadence, Heart Rate, Power with additional sensors)
8. Garantia i Suport
CYCPLUS products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official CYCPLUS weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
Oficial Weblloc: Visita la botiga CYCPLUS a Amazon
