1. Informació important de seguretat
Si us plau, llegiu atentament totes les instruccions abans del muntatge i l'ús. Conserveu aquest manual per a futures consultes.
- Es requereix assemblea d'adults: This product requires assembly by adults.
- Límit de pes: The maximum supported weight for this bed is 300 kg. Do not exceed this limit.
- Eines adequades: Ensure you have all necessary tools before beginning assembly.
- Fixacions segures: Periodically check and tighten all bolts and screws to ensure stability.
- Col·locació: Place the bed on a level surface. Avoid placing near heat sources or in direct sunlight to prevent material degradation.
- Seguretat dels nens: Mantingueu les peces petites allunyades dels nens durant el muntatge.
2. Llista de components
Abans del muntatge, verifiqueu que tots els components que s'enumeren a continuació siguin presents i no estiguin danyats. Si hi ha alguna peça que falti o que estigui danyada, poseu-vos en contacte amb el servei d'atenció al client.

Imatge: Lateral view of the BENEDICTE bed frame, showing the headboard, side rails, and wooden slatted base.

Imatge: Detallada view of the wooden slats and their plastic holders, forming the bed's support system.
Contingut del paquet:
- Headboard (1 unit)
- Side Rails (2 units)
- Footboard (1 unit)
- Wooden Slats (28 units)
- Center Support Beam(s) (Quantity may vary)
- Bed Legs (4 units)
- Maquinari de muntatge (cargols, perns, volanderes, clau Allen)
Note: Mattress is not included.
3. Instruccions de muntatge i instal·lació
Follow these steps carefully to assemble your BENEDICTE bed frame. It is recommended to assemble the bed with two people.
- Desembalatge i inspecció: Carefully unpack all components and lay them out on a clean, soft surface (e.g., a rug or blanket) to prevent scratches. Compare with the components list to ensure everything is present.
- Col·loca les cames: Secure the four bed legs to the footboard and side rails using the provided hardware. Ensure they are tightened firmly.
- Muntar el capçal i el peu del llit: Connect the side rails to the headboard and footboard using the designated bolts and nuts. Do not fully tighten all fasteners until the entire frame is assembled.
- Suport del centre d'instal·lació: If your bed includes a center support beam, install it now, attaching it to the headboard and footboard or designated cross-supports.
- Col·locar llistons: Insert the wooden slats into their designated holders on the side rails and center support. Ensure each slat is securely seated.
- Ajustament final: Once all components are in place and aligned, fully tighten all bolts and screws. Do not overtighten.
- Posició del llit: Moveu amb cura el marc del llit muntat a la ubicació desitjada.

Image: The BENEDICTE bed, fully assembled with a mattress, showcasing its Scandinavian design and beige fabric upholstery.

Image: A detailed shot of one of the wooden bed legs and the textured beige fabric covering the bed frame.
4. Instruccions de funcionament
The BENEDICTE bed is designed for comfortable and stable sleep. To ensure optimal performance and longevity:
- Compatibilitat del matalàs: This bed is compatible with all 160 x 200 cm mattresses. Ensure your mattress fits properly within the frame.
- Distribució uniforme del pes: Avoid concentrating heavy loads on a single point of the bed. Distribute weight evenly across the mattress and slatted base.
- Moviment: When moving the bed, lift it rather than dragging it to prevent damage to the legs and frame.
5. Manteniment i cura
Regular maintenance will help preserve the appearance and structural integrity of your bed.
- Cura del teixit: For general cleaning, gently vacuum the fabric upholstery with a soft brush attachment to remove dust and debris. For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, consult a professional upholstery cleaner. Avoid using harsh chemicals or abrasive cleaners.
- Cura de la fusta: Wipe wooden legs with a soft, damp cloth. Dry immediately with a clean cloth. Avoid using silicone-based polishes or waxes.
- Comprovació estructural: Periodically (every 3-6 months) inspect all bolts and screws and tighten them if necessary.

Imatge: Un primer pla view of the beige polyester fabric, highlighting its texture and weave.
6. Solució De Problemes
Aquí teniu solucions a problemes comuns que podeu trobar:
- Sorolls de grinyols: Squeaking often indicates loose connections. Check and tighten all bolts and screws on the frame and legs. Ensure slats are properly seated.
- El llit sembla inestable: Verify that all legs are firmly attached and that the bed is on a level surface. Re-tighten all assembly hardware.
- Slats Falling Out: Ensure the slats are correctly inserted into their plastic holders and that the center support beam (if applicable) is securely in place.
7. Especificacions
| Característica | Detall |
|---|---|
| Model | BENEDICTE |
| Color | Beix |
| Material (Upholstery) | 100% Polyester Fabric |
| Material (Frame Structure) | Contraxapat |
| Material (Legs) | Fusta de pi |
| Sleeping Dimensions | 160 x 200 cm |
| Dimensions totals (L x P x A) | 172 cm x 211 cm x 87 cm |
| Sleeping Height | 30 cm |
| Alçada de la cama | 15 cm |
| Number of Places | 2 places |
| Slatted Base Type | Llistons de fusta |
| Nombre de Llistons | 28 llistons |
| Maximum Supported Load | 300 kg |
| Muntatge obligatori | Sí |
| Weight of Item | 39 kg |
8. Garantia i Suport
For information regarding product warranty, returns, or to report missing/damaged parts, please refer to the purchase documentation or contact Vente-unique customer service directly.
Atenció al client: Si us plau, visiteu el Vente-unique Brand Store or contact your retailer for support.





