Introducció
The GAMDIAS Aura GC10m V2 WH is a micro-tower computer case designed for Micro-ATX and Mini-ITX motherboards. It features a dual-chamber design, panoramic tempered glass panels, and comes equipped with three Addressable RGB (ARGB) fans to enhance system aesthetics and cooling. This manual provides essential information for the proper installation, operation, and maintenance of your computer case.
Imatge: Frontal view of the GAMDIAS Aura GC10m V2 WH Micro-Tower Computer Case, showcasing its tempered glass panels and pre-installed ARGB fans.
Configuració i instal·lació
Before beginning installation, ensure you have all necessary components and tools. Refer to your motherboard and component manuals for specific installation instructions.
1. Preparació del cas
Carefully remove the tempered glass side and front panels. These are typically secured with thumbscrews or a latch mechanism. Place them on a soft, flat surface to prevent scratches.
Imatge: Anglesa view of the case with the tempered glass side panel removed, showing the internal structure and fan mounts.
2. Instal·lació de la placa base
- Instal·leu la protecció d'E/S (si no està preinstal·lada a la placa base) a l'obertura posterior de la carcassa.
- Alinea la placa base Micro-ATX o Mini-ITX amb els separadors de l'interior de la carcassa.
- Fixeu la placa base amb els cargols proporcionats.
Imatge: Interna view of the case, highlighting the motherboard tray area and fan mounting points.
3. Instal·lació de la font d'alimentació (PSU)
- Install your PSU into its designated compartment, typically at the rear bottom of the case.
- Fixeu la font d'alimentació amb els cargols de la part posterior de la carcassa.
- Ensure the PSU fan faces the correct direction for optimal airflow (usually downwards if there's a vent, or upwards if not).
Image: Rear internal view of the case, showing the PSU mounting area and cable routing options.
4. Instal·lació de la unitat
- 3.5" / 2.5" Drive Bay (HDD Cage): Locate the HDD cage. Install one 3.5" HDD or one 2.5" SSD/HDD.
- Badies d'unitat de 2.5": The case supports three additional 2.5" SSDs/HDDs. Mount these drives to the designated brackets or locations within the case.
5. Instal·lació del ventilador i del radiador
The case comes with three pre-installed ARGB fans (two side, one rear). Additional fans or radiators can be installed in the following locations:
- A dalt: Supports 3 x 120mm or 2 x 140mm fans; 360mm or 280mm radiators.
- lateral: Supports 2 x 120mm or 2 x 140mm fans; 240mm radiators. (Pre-installed 2 x 120mm ARGB fans)
- A baix: Admet 3 ventiladors de 120 mm o 2 de 140 mm.
- posterior: Supports 1 x 120mm or 1 x 140mm fan; 120mm radiators. (Pre-installed 1 x 120mm ARGB fan)
Imatge: Interna view showing the pre-installed ARGB fans on the side and rear, illustrating fan placement.
6. Connecting Front I/O Ports and ARGB
Connect the following cables from the case to your motherboard:
- USB 2.0: Connect the USB 2.0 header cable.
- Tipus C: Connect the USB Type-C header cable (if your motherboard supports it).
- Àudio HD: Connect the HD Audio header cable.
- Engegada/Restabliment/LEDs: Connect the front panel power, reset, HDD LED, and power LED cables according to your motherboard manual.
- ARGB Fans: Connect the ARGB fan cables to your motherboard's 5V ARGB header or to the integrated ARGB controller (if applicable). The case includes an LED Switch Button for controlling ARGB lighting if connected to the case's internal controller.
Imatge: Superior view of the case, showing the front I/O panel with USB ports and the LED switch button.
Funcionament
Encès
Once all components are installed and connected, close the side panels. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front panel of the case to start your system.
Control d'il·luminació ARGB
Els ventiladors ARGB preinstal·lats es poden controlar de dues maneres:
- Botó de commutació LED: If the ARGB fans are connected to the case's internal controller, press the dedicated LED Switch Button on the front I/O panel to cycle through various lighting effects and colors.
- Programari de la placa base: If the ARGB fans are connected directly to a compatible 5V ARGB header on your motherboard, you can control the lighting effects using your motherboard's proprietary RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync).
Manteniment
Regular maintenance helps ensure optimal performance and longevity of your computer components.
- Filtres de pols: The case features removable dust filters (e.g., on the top and bottom). Periodically remove and clean these filters with compressed air or water (ensure they are completely dry before reinstallation).
- Neteja de caixa: Utilitzeu un suau, damp cloth to clean the exterior surfaces of the case. For tempered glass panels, use a glass cleaner and a microfiber cloth. Avoid abrasive cleaners.
- Eliminació de pols interna: Every few months, open the case and use compressed air to remove dust from internal components, especially fan blades and heatsinks.
Resolució de problemes
Si teniu problemes, tingueu en compte les solucions habituals següents:
- El sistema no s'encén:
- Assegureu-vos que la font d'alimentació estigui engegada i connectada correctament a la presa de corrent.
- Verify all power cables (24-pin ATX, CPU, GPU, drives) are securely connected.
- Check that the front panel power button cable is correctly connected to the motherboard.
- ARGB Fans Not Lighting Up/Spinning:
- Confirm ARGB cables are securely connected to a 5V ARGB header on the motherboard or the case's controller.
- Ensure fan power cables are connected to appropriate fan headers on the motherboard or PSU.
- If using motherboard software, verify it is installed and configured correctly.
- Ports d'E/S frontals no funcionen:
- Check that the USB and HD Audio cables from the front panel are correctly connected to their respective headers on the motherboard.
For persistent issues, consult your motherboard manual or contact GAMDIAS support.
Especificacions
| Model | AURA GC10 V2 WH |
| Tipus de cas | Micro-Tower |
| Suport de la placa base | Micro-ATX, Mini-ITX |
| Dimensions (LxWxH) | 42 x 29 x 37 cm |
| Pes | 5 kg |
| Drive Bays | 1 x 3.5" or 1 x 2.5" (HDD Cage), 3 x 2.5" |
| Ports d'E/S | 1 x Type-C, 1 x USB 2.0, 1 x HD Audio, 1 x LED Switch Button |
| Ventiladors preinstal·lats | 2 x 120mm ARGB (Side), 1 x 120mm ARGB (Rear) |
| Suport dels fans |
|
| Suport del radiador |
|
| Límit d'alçada del refrigerador de la CPU | 165 mm |
| VGA Length Limit | 400 mm |
| Límit de longitud de la font d'alimentació | 160 mm |
Informació de la garantia
For detailed warranty terms and conditions, please refer to the official GAMDIAS weblloc web o la targeta de garantia inclosa amb el producte. Conserveu el comprovant de compra per a reclamacions de garantia.
Atenció al client
If you require further assistance or have questions regarding your GAMDIAS Aura GC10m V2 WH computer case, please contact GAMDIAS customer support.
- Fabricant: GAMDIAS TAIWAN
- Adreça: No. 113, Jian 2nd Rd., Zhonghe, Dist., New Taipei City 235, Taiwan
- Importador (Índia): Allway Distributions Pvt Ltd, No-49, H.B. Samajha Road, Baswangudi , Bengaluru- 560004
- Contacte de l'importador (Índia): 8904307700
- Oficial Weblloc: www.gamdias.com (Si us plau, consulteu la informació oficial) website for the most up-to-date support contact information and resources.)
