1. Introducció
This manual provides instructions for the installation and operation of your BN-LINK CP-UWLD28 Dimmer Light Switch. This dimmer switch is designed for single-pole applications and requires a neutral wire for proper functionality. It supports dimmable LED, CFL, and incandescent light bulbs, offering two distinct dimming modes and a memory function to recall your last brightness setting.
2. Què hi ha a la caixa
- 1x Dimmer Light Switch
- 1x Wall Plate
- 4x femelles de filferro
- 2x cargols llargs
- 2x cargols curts
- 1x Manual d'usuari (aquest document)
Image: The package contents, including the dimmer switch, wall plate, wire nuts, and mounting screws.
3. Especificacions
| Característica | Detall |
|---|---|
| Mode d'operació | ON-OFF |
| Valoració actual | 3 Amps |
| Vol. Operatiutage | 125 Volts |
| Dispositius compatibles | Dimmable LED (3W-150W), CFL (3W-150W), Incandescent (3W-400W) |
| Tipus de control | Polsador manual |
| Protocol de connectivitat | N.A (No WiFi) |
| Dimensions (L x A x A) | 4.49 x 2.76 x 1.34 polzades |
| Pes de l'article | 5 unces |
| Color | Blanc |
Image: Product dimensions of the dimmer switch.
4. Instal·lació
Important: Installation should be performed by a qualified electrician or a person with knowledge of electrical wiring. Ensure power is turned off at the circuit breaker before beginning installation.
- Apagueu l'alimentació: Locate the circuit breaker controlling the light switch you intend to replace and turn off the power. Verify the power is off using a voltage provador.
- Treure l'interruptor antic: Carefully remove the existing wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch.
- Identificar els cables: Identify the following wires in your electrical box:
- Cable de línia: Carries power from the circuit breaker.
- Cable de càrrega: Es connecta a la làmpada.
- Fil neutre: Typically white, required for this dimmer switch.
- Cable de terra: Bare copper or green.
- Wire the Dimmer Switch: Connect the wires from the dimmer switch to the corresponding wires in the electrical box using the provided wire nuts. Refer to the wiring diagram below.
- Interruptor de regulació Filferro blanc to Wall Box Fil neutre
- Interruptor de regulació Filferro negre to Wall Box Power Supply's Line (Live)
- Interruptor de regulació Filferro vermell to Wall Box Cable de càrrega
- Interruptor de regulació Filferro verd to Wall Box Cable de terra
- Muntar l'interruptor: Carefully push the wired dimmer switch into the electrical box. Secure it with the provided screws.
- Instal·leu la placa de paret: Attach the new wall plate over the dimmer switch.
- Restaura l'alimentació: Torneu a encendre l'alimentació al disjuntor.
Image: Wiring diagram for single-pole installation. Ensure a neutral wire is available.
Note: This dimmer switch works in single-pole only and requires a neutral wire. It is not a smart dimmer switch and cannot be connected to Wi-Fi.
5. Funcionament
The BN-LINK Dimmer Light Switch features intuitive controls for adjusting light brightness and an indicator light for visibility in the dark.
Primer ús
During the first use, press the power button on the dimmer switch. The initial brightness of the light is set at 100%. Use the "+" and "-" buttons for fast adjustments and fine adjustment.
Video: Demonstration of the BN-LINK Dimmer Light Switch's operation, including fast and fine dimming adjustments and memory function.
Controls acabatsview
Image: Labeled buttons on the dimmer switch for power, dimming up, and dimming down, with indicator lights.
- Botó d'encesa: Press to turn the lighting On/Off.
- Dimmer "+" Button:
- Fast Adjustment: Press briefly to increase brightness by 10% each time.
- Ajust fi: Press and hold to gradually increase brightness by 1% each time. - Dimmer "-" Button:
- Fast Adjustment: Press briefly to decrease brightness by 10% each time.
- Ajust fi: Press and hold to gradually decrease brightness by 1% each time. - Llums indicadores: Display the current brightness level (20%, 40%, 60%, 80%, 100%).
Image: Visual representation of the fast (10% increments) and fine (1% increments) brightness adjustment modes.
Funció de memòria
The dimmer switch remembers the last brightness level used and restores it automatically the next time the light is turned on.
Image: The thoughtful indicator light helps locate the dimmer easily in the dark.
6. Compatibilitat
This dimmer switch is compatible with various dimmable light sources:
- LED regulable: 3-150W, 125V/60Hz
- Dimmable CFL: 3-150W, 125V/60Hz
- L incandescentamp: 3-400W, 125V/60Hz
Please ensure that your fluorescent lamp i LED lamp are dimmable, and the total load of the bulbs is within the specified range.
Image: Illustration of wide compatibility with incandescent, dimmable LED, and dimmable CFL bulbs.
