1. Instruccions de seguretat
Si us plau, llegiu i comprengueu totes les instruccions abans de muntar i utilitzar aquest producte. Si no seguiu aquestes instruccions, podeu patir lesions o danys al producte.
- Mantingueu totes les peces petites i els materials d'embalatge fora de l'abast dels nens i les mascotes.
- Assemble the bed on a soft, clean surface to prevent scratches.
- Assegureu-vos que totes les connexions estiguin ben ajustades abans d'utilitzar-les. Comproveu-les i torneu-les a apretar periòdicament si cal.
- No supereu la capacitat màxima de pes de 1000 lliures.
- Use only the recommended mattress heights (6", 8", 10", 12") for optimal support and fit.
- No us poseu dret ni salteu a sobre del marc del llit.
- Si falta alguna peça o està danyada, no procediu amb el muntatge. Poseu-vos en contacte amb el servei d'atenció al client immediatament.
2. Contingut del paquet
Your Polibi King Size Luxury Upholstered Platform Bed is shipped in two manageable boxes. Please verify that all components are present before beginning assembly.
Components:
- Capçal entapissat
- Baranes laterals entapissades (2)
- Peu entapissat
- Biga de suport central
- Solid Wood Slats (20 pieces, 10cm wide)
- Support Legs (various, including adjustable height options)
- Hardware Pack (bolts, washers, nuts, L-wrench, hammer)
- Instruccions de muntatge
A power drill (not included) is recommended for quicker assembly.
3. Muntatge i muntatge
Follow these steps carefully to assemble your Polibi King Size Luxury Upholstered Platform Bed.
- Desempaquetar i identificar les peces: Traieu amb cura tots els components de l'embalatge. Col·loqueu-los sobre una superfície neta i suau. Consulteu la llista de peces per assegurar-vos que hi hagi totes les peces.
- Fixeu els rails laterals al capçal: Connect the upholstered side rails to the headboard using the provided hardware. Ensure the connections are firm but do not fully tighten yet.
- Fixeu el peu de taula: Connect the upholstered footboard to the other end of the side rails. Once all four sides are connected, gently tighten all bolts.
- Instal·lació de la biga de suport central: Place the center support beam along the length of the bed frame. Secure it to the headboard and footboard brackets using the designated hardware.
- Fixeu les potes de suport: Screw the support legs into the designated points on the frame and center support beam. Ensure they are stable and level.
- Instal·lar llistons: Lay the solid wood slats across the bed frame, fitting them into the designated slots or attaching them with screws if required. Ensure even spacing. The slats are 10cm wide for enhanced support.
- Adjust Mattress Height (Optional): The bed frame is designed to accommodate mattresses of 6", 8", 10", or 12" heights. Adjust the bed frame installation method as per the separate instructions provided in the package to achieve the desired mattress height. This typically involves adjusting the height of the support brackets for the slats.
4. Funcionament i ús
Once assembled, your Polibi King Size Luxury Upholstered Platform Bed is ready for use.
- Col·locació del matalàs: Carefully place your mattress onto the installed slats. The embedded design helps keep the mattress securely in place.
- Capacitat de pes: The bed frame is designed to support up to 1000 lbs, including the mattress and occupants.
- Silent Sleep: Each support point is covered with sponge stickers to prevent noise, contributing to a quiet sleep environment.
5. Manteniment
Proper care will extend the life and appearance of your upholstered platform bed.
- Cura del teixit: The bed is upholstered with premium, waterproof polyester fabric. For general cleaning, gently wipe with a damp drap. En cas de vessaments, eixugueu immediatament amb un drap net i sec. Eviteu productes químics agressius o netejadors abrasius.
- Pols: Regularly dust the headboard and frame with a soft, dry cloth or a vacuum cleaner with a brush attachment.
- Comprovació de maquinari: Periodically check all bolts and connections to ensure they remain tight. Re-tighten as needed to maintain stability.
- Eviteu la llum solar directa: Prolonged exposure to direct sunlight may cause fabric fading.
6. Solució De Problemes
Consulteu aquesta secció per obtenir solucions a problemes comuns.
- Sorolls de grinyols:
- Ensure all bolts and screws are securely tightened.
- Check that the slats are properly seated and not rubbing against the frame. The sponge stickers on support points are designed to prevent noise.
- Comproveu que el matalàs estigui correctament col·locat i que no causi fricció.
- El llit sembla inestable:
- Re-check all connections, especially where the side rails meet the headboard and footboard, and the center support beam.
- Ensure all support legs are firmly attached and making even contact with the floor.
- Corredissa de matalàs:
- The embedded design should prevent mattress sliding. Ensure the mattress is fully seated within the frame.
- Verify that the correct mattress height setting was chosen during assembly.
7. Especificacions
| Marca | Polibi |
| Model | King Size Luxury Upholstered Platform Bed |
| Mida | Rei |
| Color | Beige (as per current product variant) |
| Dimensions del producte | 96.5 cm de llargada x 86.22 cm d'amplada x 43.3 cm d'alçada |
| Capacitat de pes | 1000 lliures |
| Material del marc | Fusta massissa de pi |
| Material de tapisseria | Premium Waterproof Polyester Fabric |
| Headboard Features | Oversized, Padded with High-Density Cotton & Sponge |
| Slat Width | 10 cm |
| Compatible Mattress Heights | 6", 8", 10", 12" (adjustable) |
8. Garantia i Suport
For specific warranty information and customer support, please refer to the documentation included with your purchase or contact Polibi customer service directly. Keep your purchase receipt for warranty claims.
If you encounter any issues not covered in this manual or require further assistance, please reach out to our support team.
Informació de contacte: Please refer to the contact details provided on the product packaging or the official Polibi weblloc.
